Monitoring Redundancy in Installed Hardware

Purpose

Display redundancy information specific to the hardware installed.

Action

To display redundancy information of the hardware installed, system environment information, and detailed information on the temperature status of an ERX7xx router.

host1#show environment all
    chassis: 14 slot (id 0x3, rev. 0x0)
    fabric: 5 Gbps (rev. 1)
    fans: ok
    nvs: ok (81MB flash disk, 54% full)
    power: A ok, B not present
    AC power: A not present, B not present
    srp redundancy: none
*** slots: cards missing or offline
        online: 6 9
        standby: 8
        offline: 2
        empty: 0 1 3 4 5 7 10 11 12 13
    line redundancy: 1 redundancy group(s)
        width 6, spare 8, primary 9
    temperature: ok
    timing: primary
        primary: internal SC oscillator (ok)
        secondary: internal SC oscillator (ok)
        tertiary: internal SC oscillator (ok)
        auto-upgrade enabled
*** system operational: no

        processor     processor        IOA           IOA    
       temperature   temperature   temperature   temperature
slot   (10C - 70C)     status      (10C - 70C)     status   
----   -----------   -----------   -----------   -----------
0          31        normal            30        normal     
3          31        normal            30        normal 
5          31        normal            30        normal 
7          31        normal            30        normal 
processor temperature ranges
        below -5C is too cold
        above 80C is too hot
        low temperature warning below 10C
        high temperature warning above 70C
IOA temperature ranges
        below -5C is too cold
        above 80C is too hot
        low temperature warning below 10C
        high temperature warning above 70C

To display redundancy information of the hardware installed, system environment information, and detailed information on the temperature status of an E320 router.

host1#show environment all

    chassis: 17 slot (id 0x3, rev. 0x0)
    fabric: 100 Gbps (rev. 1)
    fans: fanSubsystemOk
    nvs: ok (977MB flash disk, 29% full), matches running config
    power: A ok, B not present
    srp redundancy: mode is file-system-synchronization        auto-sync
enabled, switch-on-error enabled
status unknown
*** slots: cards missing or offline
online: 0 6 13
offline: 7
empty: 1 2 3 4 5 11 12 14 15 16
fabric slots: ok
online: 6 7 8 9 10
line redundancy: none
line card HA:
    high availability is configured on slots: 
         {0, 13}
    high availability state is active on slots: 
         {0, 13}
temperature: ok
timing: primary
primary: internal SC oscillator (ok)
secondary: internal SC oscillator (ok)
tertiary: internal SC oscillator (ok)
auto-upgrade enabled
fabric redundancy: ok

*** system operational: no

                            temperature   temperature
slot          type          (10C - 70C)     status
----   ------------------   -----------   -----------
0      LM-4                     42        normal
0/1    GE-4 IOA                 23        normal
6      SRP-100                  32        normal
6      SFM-100                  32        normal
6/0    SRP IOA                  25        normal
7      SFM-100                  30        normal
8      SFM-100                  23        normal
9      SFM-100                  25        normal
10     SFM-100                  24        normal
13     LM-4                     24        normal
13/0   GE-4 IOA                 23        normal

fabric temperature ranges
        below -5C is too cold
        above 79C is too hot
        low temperature warning below 10C
        high temperature warning above 70C
processor temperature ranges
        below -5C is too cold
        above 79C is too hot
        low temperature warning below 10C
        high temperature warning above 70C
IOA temperature ranges
        below -5C is too cold
        above 79C is too hot
        low temperature warning below 10C
        high temperature warning above 70C

Meaning

Table 5 lists the show environment command output fields.

Table 5: show environment Output Fields

Field Name	Field Description
Chassis	Number of slots, midplane identifier, and hardware revision number: 14Slot—5Gbps, 14 slot midplane midplaneId7Slot—5Gbps, 7 slot midplane midplaneIdRx1400—10Gbps ASIC compatible, 12 line module slots, 2 SRP module slots for ERX14xx models midplaneIdRx700—10Gbps ASIC compatible, 5 line module slots, 2 SRP module slots for ERX7xx models 17Slot—100 or 320 Gbps, 17-slot midplane for the E120 router 11Slot—320Gbps, 11-slot midplane for the E120 router
fabric	Capacity and hardware revision of the fabric.
fans	Status of fans.
nvs	Status and capacity of NVS and amount of space used.
power	Status of power feeds.
AC power	For ERX310 router only; status of power feeds.
srp redundancy	Availability of a redundant SRP module
slots: cards missing or offline.	Status of each slot: online standby offline empty
line redundancy	Number of redundancy groups installed: width—Number of slots the redundant midplane covers spare—Slot that contains a spare line module primary—Slot that contains the primary line module
fabric redundancy	Status of redundancy on the switch fabric on the E120 and E320 routers. Possible values: ok and none.
line card HA	Configuration details for stateful line module switchover on E120 and E320 routers high availability is configured on slots—Slot numbers of the pairs of primary and secondary line modules configured on a single chassis for stateful switchover. high availability state is active on slots—Slot numbers of the pairs of primary and secondary line modules activated for stateful switchover.
temperature	Status of the system temperature
timing	Source of the timing signal: primary—Type and status of the primary timing signal secondary—Type and status of the secondary timing signal tertiary—Type and status of the tertiary timing signal auto-upgrade—Status of the auto-upgrade parameter, which enables the system to revert to a higher-priority timing source after switching to a lower-priority timing source.
system operational	Status of the system
slot	Number of the slot in which the module resides
type	Type of module in the slot on the E120 and E320 routers
temperature	Temperature of the line module, SRP module, or SFM on the E120 and E320 routers
processor temperature	Temperature of the line module or SRP module
processor temperature status	Temperature condition of the line module: normal—Temperature is within the normal range too hot—Module is too hot; system will go into thermal protection mode if the temperature of any module exceeds 80 C too cold—Module is too cold; system will go into thermal protection mode if the temperature of any module drops below -5 C
IOA temperature	Temperature of the corresponding I/O module or IOA
IOA temperature status	Temperature condition of the corresponding I/O module or IOA: normal—Temperature is within the normal range too hot—Module is too hot; system will go into thermal protection mode if the temperature of any module exceeds 80 C too cold—Module is too cold; system will go into thermal protection mode if the temperature of any module drops below -5 C
processor temperature ranges	Temperature ranges for the line modules and SRP modules.
IOA temperature ranges	Temperature ranges for the I/O modules on ERX7xx models, ERX14xx models, and the ERX310 router or IOAs on the E120 and E320 routers.
fabric temperature ranges	Temperature ranges for the SRP modules and SFMs on the E120 and E320 routers.

Monitoring Redundancy in Installed Hardware

Purpose

Action

Meaning

Related Documentation