show ldp binding

Syntax

For MPLS binding information:

show [ mpls ] ldp { [ ip ] binding | binding ip }
[ destAddr [ maskLength | maskAddress ] [ longer-prefixes ] ]
[ interface interfaceType interfaceSpecifier ]
[ neighbor ipAddress ] [ generic | atm ] [ local | remote ]
[ label { atm vpi vci | explicit-null-label | implicit-null-label |
labelNumber [ labelRangeEnd ] } ]
[ brief ] [ filter ]

For layer 2 over MPLS binding information:

show [ mpls ] ldp binding layer2-vc [ vc-type vcType [ vc-id vcId ] ]
[ interface interfaceType interfaceSpecifier ]
[ neighbor ipAddress ] [ generic | atm ] [ local | remote ]
[ label { atm vpi vci | explicit-null-label | implicit-null-label |
labelNumber [ labelRangeEnd ] } ]
[ brief ] [ filter ]

Release Information

Command introduced in JunosE Release 7.1.0.
explicit-null-label keyword and optional mpls keyword added in JunosE Release 7.2.0.

Description

Displays label bindings from the MPLS label information base. This command displays the same output as the show mpls binding command.

Options

• mpls—Specifies optional keyword for compatibility with non–E Series implementations
• ip—Specifies optional keyword for compatibility with non–E Series implementations when placed before the binding keyword; when present (either before or after this keyword) displays label binding information only for IP prefixes
• destAddr—Destination address for which you want information displayed; if not specified, displays all destinations
• maskLength—Prefix length for the destination address
• maskAddress—Address mask to be applied to the destination address
• longer-prefixes—Displays information for prefixes that are equal to or more specific than the specified prefix
• interface—Displays labels associated with the specified interface
  • interfaceType—Interface type; see Interface Types and Specifiers
  • interfaceSpecifier—Particular interface; format varies according to interface type; see Interface Types and Specifiers
• ipAddress—Displays labels associated with the specified neighbor
• generic—Displays only generic labels
• atm—Displays only ATM VPI/VCI labels
• local—Displays only local labels
• remote—Displays only remote labels
• atm—Displays the specified ATM VPI/VCI labels
  • vpi—Specifies ATM VPI that partially designates a label
  • vci —Specifies ATM VCI that partially designates a label
• explicit-null-label—Displays binding information for the explicit null label
• implicit-null-label—Displays binding information for the implicit null label
• labelNumber—Label for which binding information is displayed; number in the range 16–1048575
• labelRangeEnd—Label designating the high end of a range of labels for which binding information is specified; number in the range 16–1048575
• brief—Displays limited information
• filter—See Filtering show Commands
• layer2-vc—Displays binding information for layer 2 over MPLS
• vcType—One of the following types of virtual circuit over MPLS for which binding information is displayed: aal5-vcc, ethernet, frame-relay, vlan
• vcId—Virtual circuit identifier, number in the range 1–4294967295

Mode

Privileged Exec, User Exec