next-interface

Syntax

[ no ] [ suspend ] next-interface interfaceType interfaceSpecifier
[ next-hop nextHop ] [ classifier-group claclName ] [ precedence precValue ]

Release Information

Command introduced before JunosE Release 7.1.0.

Description

Defines an output interface for an IP policy list. When the interfaceType is a broadcast medium, specify a next hop using the next-hop command. The no version removes a next interface rule from a policy list; the suspend keyword temporarily suspends the rule; the no suspend version resumes application of a suspended rule. For IP interfaces, this command is supported only on input policies.

Note: The next-interface command has been replaced by the forward interface command and may be removed completely in a future release.

The SRP module Fast Ethernet port cannot be the destination of the next-interface command.

Options

interfaceType—Interface type; see Interface Types and Specifiers
interfaceSpecifier—Particular interface; format varies according to interface type; see Interface Types and Specifiers
nextHop—Next-hop IP address
claclName—In Policy List Configuration, specifies the classifier control list used to classify packets for this next-hop policy. If you do not specify a classifier group, the router selects all packets from the interface associated with this policy list for this rule.
precValue—In Policy List Configuration, specifies the precedence of this rule in relation to other rules within this set

Mode

Classifier Group Configuration, Policy List Configuration