l2vpn route-target

Syntax

[ no ] l2vpn l2VpnName route-target { import | export | both } extendedCommunity

Release Information

Command introduced in JunosE Release 8.1.0.

Description

Creates or adds to a list of VPWS L2VPN extended communities that the router uses to determine which routes are imported by the specified VPWS L2VPN instance. The no version removes a route target from the specified list.

Options

l2VpnName—Name of the VPWS instance
import—Adds the route target to the import list for the specified VPWS instance; the VPWS accepts only routes that have at least one route target that matches a route target in the import list
export—Adds the route target to the export list for the specified VPWS instance; all routes advertised from this VPWS are associated with the route targets in the export list; at least one route target in the export list must match a route target in the import list of a VPWS L2VPN receiving the route for the route to be accepted by the VPWS L2VPN.
both—Adds the route target to both the import list and export list for the specified VPWS instance; recommended setting for a VPWS instance
extendedCommunity—Two-part number of the format number1:number2 that identifies an extended community of VPWS L2VPNs where:
- number1—AS number or an IP address
- number2—Unique integer; 32 bits if number1 is an AS number; 16 bits if number1 is an IP address

Mode

Global Configuration