Hide Navigation Pane
Show Navigation Pane
Feedback
Download
SHA1
ipv6 nd reachable-time
Syntax
ipv6 nd reachable-time { milliseconds | hours minutes seconds }
no ipv6 nd reachable-time
Release Information
Command introduced before JunosE Release
7.1.0.
Profile Configuration mode added in JunosE Release
9.0.0.
Description
Specifies the amount of time that the E Series router can reach a remote IPv6 node after some reachability confirmation event has occurred. The no version restores the default value 0 milliseconds for router advertisements and 3,600,000 milliseconds (1 hour) for Neighbor Discovery activity of the E Series router.
Options
- milliseconds—Amount of time, in the range 0–21600000 milliseconds, that the E Series router can reach a remote node after some reachability confirmation event has occurred
- hours minutes seconds—Amount
of time, in the range 0 hours 0 minutes
0 seconds – 6 hours 0 minutes 0 seconds, that the E Series router can reach a remote node after some reachability confirmation event has occurred; this specification is not supported in Profile Configuration mode
Mode
Interface Configuration, Profile Configuration
