baseline pppoe interface

Syntax

baseline pppoe interface interfaceType interfaceSpecifier

Release Information

Command introduced before JunosE Release 7.1.0.

Description

Sets a statistics baseline for PPPoE interfaces, subinterfaces, and/or circuits. The router implements the baseline by reading and storing the statistics at the time the baseline is set and then subtracting this baseline whenever baseline-relative statistics are retrieved. There is no no version.

Options

• interfaceType—One of the following interface types listed in Interface Types and Specifiers
  • atm
  • fastEthernet
  • gigabitEthernet
  • lag
  • serial—PPPoE is not currently supported on serial interfaces
  • tenGigabitEthernet
• interfaceSpecifier—Particular interface; format varies according to interface type; see Interface Types and Specifiers

Mode

Privileged Exec