Configuring Remote Access

This chapter describes how to configure remote access to an Juniper Networks E Series Broadband Services Router. This chapter discusses the following topics:

• Remote Access Overview
• Remote Access Platform Considerations
• Remote Access References
• Before You Configure B-RAS
• Remote Access Configuration Tasks
• Configuring a B-RAS License
• Mapping a User Domain Name to a Virtual Router
• Setting Up Domain Name and Realm Name Usage
• Specifying a Single Name for Users from a Domain
• Configuring RADIUS Authentication and Accounting Servers
• Configuring Local Authentication Servers
• Configuring Tunnel Subscriber Authentication
• Configuring Name Server Addresses
• Configuring Local Address Servers
• Configuring DHCP Features
• Creating an IP Interface
• Configuring AAA Profiles
• Using RADIUS Route-Download Server to Distribute Routes
• Using the AAA Logical Line Identifier to Track Subscribers
• Using VSAs for Dynamic IP Interfaces
• Mapping Application Terminate Reasons to RADIUS Terminate Codes
• Configuring Timeout
• Limiting Active Subscribers
• Notifying RADIUS of AAA Failure
• Configuring Standard RADIUS IPv6 Attributes for IPv6 Neighbor Discovery Router Advertisements and DHCPv6 Prefix Delegation
• Duplicate IPv6 Prefix Check Overview
• Configuring Duplicate IPv6 Prefix Check
• Propagation of LAG Subscriber Information to AAA and RADIUS
• Configuring the SRC Client
• Retrieval of DSL Line Rate Information from Access Nodes Overview
• DHCPv6 Local Address Pools for Allocation of IPv6 Prefixes Overview
• Configuring the DHCPv6 Local Address Pools
• Using DHCPv6 Local Address Pools for Prefix Delegation over non-PPP Links Example