FE-8 Module Combination (8 Ports) (256-MB Memory)

Line module label GE/FE
I/O module label FE-8 I/O
Number of I/O ports
8
Software release
First supported: 5.0.0
Final supported: Not applicable
The GE/FE line module must have a minimum of 256 MB of memory to be used with JunosE Release 5.3.0 or a higher-numbered release.
Description
130 W
Fast Ethernet
Type
EFA ASIC
Capability
IEEE 802.3 standards compliance
10/100Base-T
Software features
See Ethernet Modules for information about the layer 2 and layer 3 protocols and applications that this module combination supports.
Model compatibility
ERX7xx models
ERX14xx models
ERX310 router
SRP module compatibility
SRP-5G+
SRP-10G
SRP-40G
SRP-40G PLUS
SRP-SE10G
Module redundancy support
Not applicable
Cables and connectors
RJ-45 connectors
For 10-Mbps operation, use CAT 3, 4, or 5 UTP cable.
For 100-Mbps operation, use only CAT 5 UTP cable.
The transmitted signal complies with IEEE 802.3/802.3u for cable lengths up to 100 m (328 feet).
See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
LEDs
See Module LEDs.
Alarms, errors, and events
See Monitoring Ethernet Interfaces in JunosE Physical Layer Configuration Guide, Chapter 5, Configuring Ethernet Interfaces.

Line module label	GE/FE
I/O module label	FE-8 I/O
Number of I/O ports	8
Software release	First supported: 5.0.0 Final supported: Not applicable The GE/FE line module must have a minimum of 256 MB of memory to be used with JunosE Release 5.3.0 or a higher-numbered release.
Description	130 W Fast Ethernet
Type	EFA ASIC
Capability	IEEE 802.3 standards compliance 10/100Base-T
Software features	See Ethernet Modules for information about the layer 2 and layer 3 protocols and applications that this module combination supports.
Model compatibility	ERX7xx models ERX14xx models ERX310 router
SRP module compatibility	SRP-5G+ SRP-10G SRP-40G SRP-40G PLUS SRP-SE10G
Module redundancy support	Not applicable
Cables and connectors	RJ-45 connectors For 10-Mbps operation, use CAT 3, 4, or 5 UTP cable. For 100-Mbps operation, use only CAT 5 UTP cable. The transmitted signal complies with IEEE 802.3/802.3u for cable lengths up to 100 m (328 feet). See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
LEDs	See Module LEDs.
Alarms, errors, and events	See Monitoring Ethernet Interfaces in JunosE Physical Layer Configuration Guide, Chapter 5, Configuring Ethernet Interfaces.