GE 1000Base-LH Module Combination (1 Port) (128 MB)

This module combination is no longer supported because the line module has reached end-of-life. However, the I/O module is still supported.

Line module label GE/FE
I/O module label GE I/O SFP
Number of I/O ports
1 active, 1 redundant
Software release
First supported: 2.0.0
Final supported: 5.2.x
Description
130 W
Gigabit Ethernet
The GE SFP I/O module uses a range of small form-factor pluggable (SFP) transceivers to support different modes and cable lengths.
The transceivers on this GE I/O module are 1000Base-LX/LH compliant.
Type
ASIC
Capability
Ethernet (IEEE 802.3z)
1000Base-LH
Software features
See ERX Module Guide, Appendix A, Module Protocol Support for information about the layer 2 and layer 3 protocols and applications that this module combination supports.
Model compatibility
ERX7xx models
ERX14xx models
ERX310 router
SRP module compatibility
SRP-5G+
SRP-10G
SRP-40G
SRP-40G PLUS
SRP-SE10G
Module redundancy support
Not applicable
Cables and connectors
LC full duplex
Tx power:
min: –9.5 dBm
max: –3 dBm
Center wavelength: 1300 nm
Rx input power:
min: –20 dBm
max: –3 dBm
Rated for 10 km (6.2 miles) over 10-micron core cable
See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
LEDs
See ERX Module Guide, Appendix B, Module LEDs.
Alarms, errors, and events
See Monitoring Ethernet Interfaces in the Configuring Ethernet Interfaces chapter of the JunosE Physical Layer Configuration Guide for Release 8.0.x and earlier.

Line module label	GE/FE
I/O module label	GE I/O SFP
Number of I/O ports	1 active, 1 redundant
Software release	First supported: 2.0.0 Final supported: 5.2.x
Description	130 W Gigabit Ethernet The GE SFP I/O module uses a range of small form-factor pluggable (SFP) transceivers to support different modes and cable lengths. The transceivers on this GE I/O module are 1000Base-LX/LH compliant.
Type	ASIC
Capability	Ethernet (IEEE 802.3z) 1000Base-LH
Software features	See ERX Module Guide, Appendix A, Module Protocol Support for information about the layer 2 and layer 3 protocols and applications that this module combination supports.
Model compatibility	ERX7xx models ERX14xx models ERX310 router
SRP module compatibility	SRP-5G+ SRP-10G SRP-40G SRP-40G PLUS SRP-SE10G
Module redundancy support	Not applicable
Cables and connectors	LC full duplex Tx power: min: –9.5 dBm max: –3 dBm Center wavelength: 1300 nm Rx input power: min: –20 dBm max: –3 dBm Rated for 10 km (6.2 miles) over 10-micron core cable See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
LEDs	See ERX Module Guide, Appendix B, Module LEDs.
Alarms, errors, and events	See Monitoring Ethernet Interfaces in the Configuring Ethernet Interfaces chapter of the JunosE Physical Layer Configuration Guide for Release 8.0.x and earlier.