FE-8 Module Combination (8 Ports) (128 MB)

This module combination is no longer supported because the line module has reached end-of-life. However, the I/O module is still supported.

Line module label GE/FE
I/O module label FE-8 I/O
Number of I/O ports
8
Software release
First supported: 2.0.0
Final supported: 5.2.x
Description
130 W
Fast Ethernet
Type
ASIC
Capability
IEEE 802.3 standards compliance
10/100Base-T
Software features
See ERX Module Guide, Appendix A, Module Protocol Support for information about the layer 2 and layer 3 protocols and applications that this module combination supports.
Model compatibility
ERX7xx models
ERX14xx models
ERX310 router
SRP module compatibility
SRP-5G+
SRP-10G
SRP-40G
SRP-40G PLUS
SRP-SE10G
Module redundancy support
Not applicable
Cables and connectors
RJ-45 connectors
For 10-Mbps operation, use CAT 3, 4, or 5 UTP cable.
For 100-Mbps operation, use only CAT 5 UTP cable.
The transmitted signal complies with IEEE 802.3/802.3u for cable lengths up to 100 m (328 feet).
See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
LEDs
See ERX Module Guide, Appendix B, Module LEDs.
Alarms, errors, and events
See Monitoring Ethernet Interfaces in the Configuring Ethernet Interfaces chapter of the JunosE Physical Layer Configuration Guide for Release 8.0.x and earlier.

Line module label	GE/FE
I/O module label	FE-8 I/O
Number of I/O ports	8
Software release	First supported: 2.0.0 Final supported: 5.2.x
Description	130 W Fast Ethernet
Type	ASIC
Capability	IEEE 802.3 standards compliance 10/100Base-T
Software features	See ERX Module Guide, Appendix A, Module Protocol Support for information about the layer 2 and layer 3 protocols and applications that this module combination supports.
Model compatibility	ERX7xx models ERX14xx models ERX310 router
SRP module compatibility	SRP-5G+ SRP-10G SRP-40G SRP-40G PLUS SRP-SE10G
Module redundancy support	Not applicable
Cables and connectors	RJ-45 connectors For 10-Mbps operation, use CAT 3, 4, or 5 UTP cable. For 100-Mbps operation, use only CAT 5 UTP cable. The transmitted signal complies with IEEE 802.3/802.3u for cable lengths up to 100 m (328 feet). See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
LEDs	See ERX Module Guide, Appendix B, Module LEDs.
Alarms, errors, and events	See Monitoring Ethernet Interfaces in the Configuring Ethernet Interfaces chapter of the JunosE Physical Layer Configuration Guide for Release 8.0.x and earlier.