SRP-100 Module

Module label SRP-100
IOA label SRP IOA
Number of IOA ports
Not applicable
Software release
First supported: 7.0.1
Description
75 W maximum
Switch route processor (100 Gbps)
Performs system management, route table calculations and maintenance, forwarding table computations, statistics processing, configuration storage, and other control plane functions
Has 2 GB of memory
Works with the SFM–100 module to create a switch fabric
Uses a PCMCIA nonvolatile storage (NVS) card to store the system's software and configuration files
Must be installed only with SRP-100 module and SFM–100 modules
Capability
Not applicable
Software features
Not applicable
Model compatibility
E320 router
Line module compatibility
ES2 4G LM
ES2 10G UPLINK LM
ES2 10G LM
ES2 10G ADV LM (only in turbo slots)
SRP module compatibility
Cannot use with SRP-120 module or SFM-120 module
Cannot use with SRP-320 module or SFM-320 module
Line module redundancy compatibility
Yes (ES2-S1 REDUND IOA must be installed in either slot 0 or slot 11)
Module redundancy support
1:1 redundancy
Port redundancy support
Not applicable
Cables and connectors
Not applicable
LEDs Board-level LEDs:
OK (green)—Self-test passed
FAIL (red)—Failure detected
ONLINE (green)—Online with no alarms or errors
REDUN (green)—Module is the spare system controller, is up, and is ready to take the role of the online system controller. When LED is not lit, module is not acting as the spare system controller.
PA (green)—Power source on source A
PB (green)—Power source on source B
FO (green)—Fan OK
FF (red)—Fan failure
LK (green)—Ethernet link up
AC (green)—Blinks when there is Ethernet activity (traffic) on link

Flash Card Port LEDs:
0 (green)—When lit, indicates slot is busy
1 (green)—When lit, indicates slot is busy
Alarms, errors, and events
See Monitoring Modules in JunosE System Basics Configuration Guide, Chapter 6, Managing Modules.

Module label	SRP-100
IOA label	SRP IOA
Number of IOA ports	Not applicable
Software release	First supported: 7.0.1
Description	75 W maximum Switch route processor (100 Gbps) Performs system management, route table calculations and maintenance, forwarding table computations, statistics processing, configuration storage, and other control plane functions Has 2 GB of memory Works with the SFM–100 module to create a switch fabric Uses a PCMCIA nonvolatile storage (NVS) card to store the system's software and configuration files Must be installed only with SRP-100 module and SFM–100 modules
Capability	Not applicable
Software features	Not applicable
Model compatibility	E320 router
Line module compatibility	ES2 4G LM ES2 10G UPLINK LM ES2 10G LM ES2 10G ADV LM (only in turbo slots)
SRP module compatibility	Cannot use with SRP-120 module or SFM-120 module Cannot use with SRP-320 module or SFM-320 module
Line module redundancy compatibility	Yes (ES2-S1 REDUND IOA must be installed in either slot 0 or slot 11)
Module redundancy support	1:1 redundancy
Port redundancy support	Not applicable
Cables and connectors	Not applicable
LEDs	Board-level LEDs: OK (green)—Self-test passed FAIL (red)—Failure detected ONLINE (green)—Online with no alarms or errors REDUN (green)—Module is the spare system controller, is up, and is ready to take the role of the online system controller. When LED is not lit, module is not acting as the spare system controller. PA (green)—Power source on source A PB (green)—Power source on source B FO (green)—Fan OK FF (red)—Fan failure LK (green)—Ethernet link up AC (green)—Blinks when there is Ethernet activity (traffic) on link Flash Card Port LEDs: 0 (green)—When lit, indicates slot is busy 1 (green)—When lit, indicates slot is busy
Alarms, errors, and events	See Monitoring Modules in JunosE System Basics Configuration Guide, Chapter 6, Managing Modules.