path ds3 t1 remote-loopback

Syntax

[ no ] path pathChannel ds3 ds3Channel t1 t1Channel remote-loopback

Release Information

Command introduced before JunosE Release 7.1.0.

Description

Enables acceptance of remote loopback requests by a T1 channel on a DS3 signal. This command applies to a T1 channel on a DS3 over channelized SONET interface. The no version restores the default value, which is to reject remote loopback requests.

Options

• pathChannel—Number, in the range 1–2147483648, that identifies the path
• ds3Channel—Number, in the range 1–3, that identifies the DS3 channel
• t1Channel—One or more individual T1 channels, ranges of T1 channels, or combination of individual channels and ranges, in the range 1–28 (no spaces); for example, 3,7-15,19-13,27

Mode

Controller Configuration