path ds1|e1 snmp trap link-status

Syntax

[ no ] path pathChannel { ds1 | e1 } tributaryIdentifier snmp trap link-status

Release Information

Command introduced before JunosE Release 7.1.0.

Description

Enables SNMP link status processing for DS1 or E1 over channelized SONET and SDH interfaces. The no version disables SNMP link status processing.

Options

• pathChannel—Number, in the range 1–2147483648, that identifies the path
• tributaryIdentifier—Specifier for the tributary in the format
  pathChannel { ds1 | e1 } pathPayload/tributaryGroup/tributaryNumber
  • pathPayload—Payload number for the path; value is 1 for SONET and in the range 1–3 for SDH
  • tributaryGroup—Number, in the range 1–7, that identifies the group within the path
  • tributaryNumber—Number of the tributary within the tributary group; the value is in the range 1–4 if the tributary type is vt15 or tu11 and in the range 1–3 if the tributary type is tu12

Mode

Controller Configuration