Hide Navigation Pane
Show Navigation Pane
Feedback
Download
SHA1
Index
Symbols
A
- Address Resolution Protocol., See ARP
- all option (show controllers) 1, 2
- aps commands, See also show aps commands
- APS/MSP (Automatic Protect Switching/Multiplex Section Protection)
- automatic switchover
- channel numbers 1, 2
- communication methods
- configuration example
- configuring 1, 2
- events
- K1 byte
- K2 byte
- manual switchover 1, 2
- monitoring 1, 2
- overview
- protect interface 1, 2, 3, 4
- reversion after switchover
- switching mechanisms
- working interface 1, 2, 3, 4
- ARP (Address Resolution Protocol)
- Automatic Protect Switching., See APS/MSP
B
- baseline commands
- baseline interface
- baseline interface serial
- baseline line interface sonet 1, 2
- baseline path interface sonet 1, 2
- baseline section interface sonet 1, 2
- BERT (bit error rate test) patterns
- bert command
- bit error rate test patterns., See BERT patterns
C
- cable length
- cablelength commands
- cell scrambling
- channel numbers, APS/MSP interfaces 1, 2
- channel-group commands., See path ds1 | e1 commands
- channelized OCx/STMx interfaces., See cOCx/STMx interfaces
- channelized T3 interfaces
- bert command
- configuring 1, 2
- configuring HDLC channel
- equipment loopback command
- loopback command
- monitoring parameters
- numbering scheme 1, 2
- references
- testing 1, 2
- clock commands
- clock source, selecting
- channelized T3 interfaces 1, 2
- cOCx/STMx interfaces
- E1 interfaces on cOCx/STMx
- E3/T3 interfaces
- OCx/STMx interfaces 1, 2
- T1 interfaces on cOCx/STMx
- T3 interfaces on cOCx/STMx
- COCX-F3 line modules
- cOCx/STMx interfaces
- configuring HDLC channel
- configuring T1/E1
- loopback 1, 2, 3, 4
- monitoring
- numbering scheme
- references
- testing 1, 2
- configuring., See specific feature, product, or protocol
- connectivity in SONET/SDH paths 1, 2
- control traffic for high-density Ethernet
- controller commands
- conventions
- counters
- CRC (cyclic redundancy check)
- crc command
- CT3/T3 12 I/O modules
- CT3/T3 12 line modules
- CT3/T3-F0 line modules
- customer support
- cyclic redundancy check., See CRC
D
- data stream inversion, enabling
- debounce command
- debounce-interval command
- dedicated tunnel-server ports
- description command
- channelized T3 interfaces
- E3/T3 interfaces
- unchannelized SONET interfaces 1, 2
- description, interface
- Distance Vector Multicast Routing Protocol., See DVMRP tunnels
- documentation set
- DS0 timeslots
- channelized T3 interfaces
- cOCx/STMx interfaces 1, 2, 3
- DS1., See T1 entries
- ds3-scramble command
- DS3., See T3 entries
- dsu commands
- duplex command
- DVMRP tunnels
- dynamic tunnel-server ports
- dynamic tunnel-service interfaces
E
- E1 channels
- E1 interfaces., See cOCx/STMx interfaces
- E120 and E320 Broadband Services Routers
- E120 Broadband Services Routers 1, 2
- E3 interfaces
- e3-scramble command
- E320 Broadband Services Routers
- 100 Gbps fabric 1, 2
- 120 Gbps fabric
- 320 Gbps fabric 1, 2
- equipment loopback command
- ES2 10G ADV line module (LM)
- ES2 10G line module (LM) 1, 2, 3, 4
- ES2 10G Uplink line module (LM)
- ES2 4G line module (LM) 1, 2, 3, 4
- ethernet description command
- Ethernet interfaces
- commands, See also show commands
- configuring
- debounce, enabling
- debounce-interval, modifying
- disabling interfaces
- duplex type
- high-density
- IEEE 802.3ae 1, 2
- line speed
- MAC address validation
- monitoring
- numbering scheme 1, 2
- events
F
- facilities data link., See FDL
- Fast Ethernet interfaces
- FDL (facilities data link)
- filtering
- fractional T1/E1
- fractional T3
- framing command
- framing format
- channelized T3 interfaces 1, 2
- cOCx/STMx interfaces 1, 2
- E3/T3 line
G
- Generic Routing Encapsulation., See GRE tunnels
- Gigabit Ethernet interfaces
- modules
- redundant port 1, 2
- specifying an interface
- GRE (Generic Routing Encapsulation) tunnels
H
I
- idle character
- channelized T3 interfaces
- cOCx/STMx interfaces 1, 2
- E3/T3 interfaces
- idle-character command
- channelized T3 interfaces
- cOCx/STMx interfaces 1, 2
- E3/T3 interfaces
- IEEE 802.1w
- IEEE 802.3ae 1, 2
- IEEE 802.3u
- IEEE 802.3z
- intelligent dropping of packets
- interface commands
- interface description
- interface stack
- interfaces, monitoring
- internal clocking
- channelized T3 interfaces
- cOCx/STMx interfaces 1, 2
- E1 interfaces 1, 2
- E3/T3 interfaces
- OCx/STMx interfaces
- T1 interfaces 1, 2
- invert data command
- ip commands
- IP tunnels
- ISMs (IPSec Service modules)
J
K
L
- L2TP (Layer 2 Tunneling Protocol)
- L2TP network server., See LNS
- Layer 2 Tunneling Protocol., See L2TP
- line clocking
- channelized T3 interfaces
- cOCx/STMx interfaces 1, 2
- E1interfaces 1, 2
- E3/T3 interfaces
- OCx/STMx interfaces
- T1 interfaces 1, 2
- line modules
- line speed
- link commands
- LNS (L2TP network server)
- load-interval command
- local loopback
- channelized T3 interfaces 1, 2
- cOCx/STMx interfaces
- E3/T3 interfaces
- OCx/STMx interfaces
- loopback
- channelized T3 interfaces 1, 2
- cOCx/STMx interfaces 1, 2
- E3/T3 interfaces
- T3 interfaces, remote
- loopback command
- channelized T3 interfaces 1, 2
- cOCx/STMx interfaces
- E3/T3 interfaces
- OCx/STMx interfaces
M
- MAC (media access control) addresses
- MAC pause frames
- maintenance data link., See MDL
- manual switchover, APS/MSP
- manuals
- max-interfaces command
- maximum receive unit., See MRU
- maximum transmission unit., See MTU
- MDL (maintenance data link)
- mdl commands
- monitoring., See specific feature, product, or protocol
- MPLS (Multiprotocol Label Switching)
- MRU (maximum receive unit)
- mru command
- MSP
- MSP (Multiplex Section Protection) 1, 2
- MTU (maximum transmission unit)
- mtu command
- channelized T3 interfaces
- cOCx/STMx interfaces
- E3/T3 interfaces
- Ethernet interfaces 1, 2
- Multiplex Section Protection., See APS/MSP
- Multiprotocol Label Switching., See MPLS
N
- network loopback
- channelized T3 interfaces 1, 2
- cOCx/STMx interfaces
- E3/T3 interfaces
- OCx/STMx interfaces
- notice icons
- numbering scheme
O
P
- packet classifier
- packets
- path commands
- path ds1 fdl commands
- path ds1 remote-loopback command
- path ds1|e1 commands
- path ds1|e1
- path ds1|e1 bert
- path ds1|e1 channel-group description
- path ds1|e1 channel-group shutdown
- path ds1|e1 channel-group snmp trap link-status
- path ds1|e1 channel-group timeslots
- path ds1|e1 clock source
- path ds1|e1 description
- path ds1|e1 framing
- path ds1|e1 loopback
- path ds1|e1 loopback remote
- path ds1|e1 shutdown
- path ds1|e1 snmp trap link-status
- path ds3 commands
- path ds3 mdl commands
- path ds3 t1 commands
- path ds3 t1 fdl commands
- pause frames
- payload loopback
- platform considerations
- ports, tunnel-server
- protect interface, APS/MSP 1, 2
R
- redundant port, Gigabit Ethernet 1, 2
- remote loopback
- channelized T3 interfaces
- cOCx/STMx interfaces
- T3 interfaces 1, 2
- reserve-bandwidth command
- reversion
- RSTP (Rapid Spanning Tree Protocol)
S
- scramble command
- sdh command 1, 2
- section layer, SONET/SDH
- secure IP tunnels 1, 2
- serial description command
- serial interfaces
- SFPs (small form-factor pluggable transceivers) 1, 2
- shared tunnel-server ports
- show aps commands
- show controllers commands
- show controllers e3
- show controllers sonet
- show controllers sonet configuration
- show controllers sonet ds1|e1
- show controllers sonet ds3
- show controllers sonet line | path | section
- show controllers sonet line | path | section | tributary
- show controllers t3 1, 2
- show controllers t3 ft1
- show controllers t3 remote 1, 2, 3
- show controllers t3 serial
- show displays, filtering 1, 2, 3
- show interfaces commands
- show tunnel-server command
- shutdown command
- shutting down
- DS3
- E3/T3 interfaces
- SONET/SDH interface
- T1 channel 1, 2
- T1 subchannel 1, 2
- T1/E1 channel
- T1/E1 channel group
- T3 controller
- SMs (Service modules)
- SNMP (Simple Network Management Protocol) link status processing
- snmp trap link-status command
- SONET APS 1+1 redundancy., See APS/MSP
- SONET/SDH (synchronous optical network/Synchronous Digital Hierarchy)
- alarms, configuring
- line modules supported
- MPLS fast reroute 1, 2
- source, clock
- channelized T3 interfaces 1, 2
- E3/T3 interfaces
- OCx/STMx interfaces 1, 2
- speed command 1, 2
- static tunnel-service interfaces
- subchannels
- support, technical, See technical support
- switching mechanisms, APS/MSP 1, 2
- switchover
- Synchronous Digital Hierarchy., See SONET/SDH
- synchronous optical network., See SONET/SDH
T
- T1 channels
- t1 commands
- t1 fdl commands
- T3 channels
- T3 controllers
- T3 interfaces
- T3, fractional
- technical support
- testing interfaces
- text and syntax conventions
- threshold command 1, 2
- time intervals 1, 2
- transmit clock source, configuring
- transmit powers and cable length 1, 2
- trigger delay command
- tunnel-server ports
- tunnel-service interfaces
- configuring 1, 2
- considerations
- E120 and E320 Broadband Services Routers
- monitoring
- overview
- redundancy and interface distribution 1, 2
- tunnels
U
V
W
X
