Hide Navigation Pane
Show Navigation Pane
Feedback
Download
SHA1
Index
Symbols
- 10-Gigabit Ethernet interfaces
- 10-Gigabit Ethernet modules
- 802.3ad link aggregation
- 802.3ah link-fault management
- 802.3ah OAM link-fault management, See Ethernet OAM link-fault management
A
- AAA (authentication, authorization, accounting)
- aaa commands
- AAL (ATM Adaptation Layer)
- AAL5 encapsulation
- functions of access nodes
- interworking function 1, 2
- AAL5 encapsulation types
- AC-Cookie tag, PPPoE
- AC-Name tag, PPPoE
- access nodes
- accounting statistics
- active discovery mode
- address ranges
- Agent-Circuit-Id
- Agent-Circuit-Id DSL Forum VSA
- agent-circuit-identifier and dynamic VLAN subinterfaces 1, 2
- Agent-Remote-Id DSL Forum VSA
- aggregating T1 or E1 lines 1, 2
- aggregation, Ethernet link
- AIS (alarm indication signal) cells 1, 2
- alarm indication signal cells., See AIS cells
- ARP (Address Resolution Protocol) table
- arp commands
- ARP, Inverse
- Asynchronous Transfer Mode., See ATM
- ATM (Asynchronous Transfer Mode), See also OAM, ATM
- AAL
- AIS cells, handling
- ATM passthrough
- cable lengths
- CAC
- CC cells
- cell scrambling payload
- configuring 1, 2, 3, 4
- dynamic interfaces
- E120 and E320 routers 1, 2, 3, 4, 5, 6, 7, 8, 9
- E320 routers 1, 2
- fault management
- ILMI
- interface description
- loopback cells, handling 1, 2
- Martini encapsulation
- module capabilities (statistics)
- monitoring
- OAM
- oversubscription for dynamic interfaces 1, 2
- overview
- ping
- platform considerations
- PVCs
- configuring 1, 2
- configuring individual parameters for
- defining
- RDI cells, handling
- testing
- VC classes
- VC integrity
- VCC-layer connectivity verification
- ATM 1483 subinterfaces, dynamic
- assigning VC classes to 1, 2, 3
- benefits of using
- bulk configuration of VC ranges
- changing VC subranges 1, 2
- configuring
- creating static ATM interfaces inVC subranges 1, 2
- exporting descriptions
- monitoring
- overriding base profile assignments 1, 2
- oversubscription 1, 2
- overview
- profiles for
- restarting LCP negotiations for PPPoA clients
- atm aal5 commands
- ATM Adaptation Layer., See AAL
- atm atm1483 commands
- atm atm1483 advisory-rx-speed 1, 2, 3, 4
- atm atm1483 auto-configure
- atm atm1483 description 1, 2, 3
- atm atm1483 export-subinterface-description
- atm atm1483 mtu
- atm atm1483 profile
- atm atm1483 shutdown
- atm atm1483 snmp trap link-status
- atm atm1483 subscriber 1, 2
- atm commands, See also show atm commands
- atm auto-configuration
- atm bulk-config 1, 2, 3, 4
- atm bulk-config modify
- atm bulk-config shutdown
- atm cac
- atm class-vc
- atm clock internal
- atm description
- atm framing 1, 2
- atm ilmi-enable
- atm ilmi-keepalive 1, 2, 3
- atm lbo 1, 2
- atm oam
- atm oam flush 1, 2, 3
- atm oam loopback-location
- atm pvc 1, 2, 3, 4, 5, 6, 7
- atm shutdown
- atm snmp trap link-status
- atm sonet
- atm sonet stm-1
- atm uni-version 1, 2
- atm vc-per-vp 1, 2, 3
- atm vp-description
- atm vp-tunnel 1, 2
- monitor atm vc
- monitor atm vp
- ping atm interface atm
- ATM VC Configuration mode
- ATM virtual circuit (VC)
- ATM-to-Ethernet interworking
- arrival of a PPPoA session at the DSLAM
- configuration examples for
- conversion from ATM to Ethernet
- conversion from Ethernet to ATM
- cross-connect
- distinction between IWF and non-IWF PPPoE sessions
- method of mapping of ATM to Ethernet packets
- overview
- translation of ATM into Ethernet traffic
- transmission of a PPPoE session
- authentication
- auto-configure commands
- autodetection of dynamic interfaces 1, 2
B
- B-RAS application
- B-RAS applications, with PPP sessions
- B-RAS device
- bandwidth
- base profiles
- baseline commands
- baseline atm
- baseline atm vp interface
- baseline bridge
- baseline bridge interface
- baseline frame-relay
- baseline frame-relay interface
- baseline frame-relay multilinkinterface
- baseline hdlc interface serial
- baseline interface atm
- baseline interface pos
- baseline ppp (MLPPP)
- baseline ppp interface
- baseline pppoe interface
- bridge commands, See also clear bridge commands; show bridge commands; subscriber policy commands
- bridge groups
- bridge interfaces
- bridge1483 commands
- bridged Ethernet dynamic interfaces
- authenticating subscribers 1, 2, 3
- profile characteristics
- bridged Ethernet static interfaces
- bridged IP
- bridging, transparent
- concurrent routing and bridging 1, 2
- configuration examples
- configuration tasks
- configuring
- bridge groups and bridge interfaces 1, 2
- optional bridge group attributes
- routing
- subscriber policies
- creating bridge groups
- E120 and E320 routers
- MAC addresses 1, 2
- monitoring
- overview
- platform considerations
- prerequisites
- references
- setting statistics baselines
- subscriber policies
- unsupported features
- broadcast command
- bulk configuration of VC ranges
- bulk configuration of VLAN ranges
- bundle
C
- C-VLAN tags
- cable length
- CAC (connection admission control) for ATM
- Calling Number AVP
- cbr command 1, 2
- CE-side load balancing
- CE1 line modules
- cells
- Challenge Handshake Authentication Protocol., See CHAP
- channelized T1 interfaces
- channelized T3 interfaces
- CHAP (Challenge Handshake Authentication Protocol)
- circuit ID, capturing for PPPoE
- configuring
- dsl-forum-1 format and examples 1, 2
- formatting 1, 2
- monitoring
- overview
- sending to RADIUS or L2TP 1, 2
- troubleshooting
- using in profiles 1, 2
- Cisco HDLC
- class-int command 1, 2
- class-vc command
- classes, VC
- clear bridge commands
- clock commands
- clock source, selecting
- COCX-F3 line modules
- cOCx/STMx interfaces
- cold router restart
- concurrent routing and bridging., See CRB
- configuration examples
- ATM 1483 subinterfaces, dynamic
- ATM VC classes 1, 2
- bridged Ethernet, dynamic
- bridged Ethernet, static
- Cisco HDLC
- IPoA, dynamic
- MLFR
- MLPPP, dynamic
- MLPPP, static 1, 2
- PPPoE, dynamic 1, 2
- PPPoE, static 1, 2
- profiles for dynamic interfaces
- transparent bridging
- VLAN subinterfaces, dynamic 1, 2
- configure file command
- configuring., See specific feature, product, or protocol
- connection admission control., See CAC for ATM
- connection types, ATM
- control block
- control PVCs, creating
- conventions
- CRB (concurrent routing and bridging)
- crc command 1, 2
- creating an IP profile
- critical event
- critical event PDU
- CT3/T3-F0 line modules
- customer support
D
- data communication equipment., See DCE
- data PVCs, creating
- data terminal equipment., See DTE
- data-link connection identifier., See DLCI
- DCE (data communication equipment)
- debugging PPP and PPPoE dynamic interfaces
- description, interface
- DHCP option 82 field
- DHCP relay
- digital subscriber line access multiplexers., See DSLAMs
- discovery process, See OAM discovery
- Discovery protocol with PPPoE
- DLCI (data-link connection identifier) 1, 2, 3
- documentation set
- ds3-scramble command
- DSL Forum VSAs
- dsl-forum-1 format for PPPoE remote circuit ID 1, 2
- DSLAM devices
- DSLAMs (digital subscriber line access multiplexers)
- DTE (data terminal equipment)
- Duplicate event notification OAM PDUs
- duplicate protection
- dying gasp
- dynamic encapsulation type lockout
- Dynamic Host Configuration Protocol., See DHCP relay
- dynamic interfaces
- ATM 1483 subinterfaces 1, 2
- autodetection 1, 2
- bridged Ethernet
- configuring from a profile 1, 2, 3
- configuring from RADIUS
- configuring IPoA
- configuring Multiclass MLPPP
- configuring PPP and PPPoE over ATM
- configuring PPPoE over static PPPoE
- E120 and E320 routers 1, 2, 3
- E320 routers 1, 2, 3
- inserting dynamic IP routes intorouting table
- monitoring 1, 2
- oversubscription, ATM 1, 2
- overview 1, 2
- platform considerations 1, 2, 3
- profiles, reassigning
- RADIUS authentication 1, 2
- troubleshooting
- types supported 1, 2
- VLAN subinterfaces
- VLAN subinterfaces with agent-circuit-identifier information 1, 2
E
- E120 and E320 routers
- 10-Gigabit Ethernet interfaces 1, 2, 3
- 802.3ad link aggregation
- 802.3ah link-fault management 1, 2
- ATM interfaces 1, 2, 3, 4, 5, 6, 7, 8, 9, 10
- bridged IP interfaces
- Cisco HDLC interfaces
- dynamic interfaces 1, 2, 3
- Gigabit Ethernet interfaces 1, 2, 3
- POS interfaces 1, 2, 3, 4
- PPP interfaces 1, 2
- PPPoE interfaces 1, 2
- transparent bridging
- e3-scramble command
- E320 routers
- ATM interfaces
- bridged Ethernet
- dynamic interfaces 1, 2, 3
- POS interfaces
- PPP interfaces
- EAP (Extensible Authentication Protocol)
- ECMP (equal-cost multipath)
- enable commands
- enabling LMI
- enabling Multiclass MLPPP
- encapsulation commands
- encapsulation method
- encapsulation type lockout., See dynamic encapsulation type lockout
- encapsulation, configuring for PVCs
- end-to-end fragmentation and reassembly, Frame Relay
- endpoint discriminator
- equal-cost multipath., See ECMP
- error frame seconds
- error frame seconds summary events
- error frames
- Errored Frame Event TLV
- Errored Frame Seconds Summary Event TLV
- Errored Symbol Period TLV
- ES2-S1 Service IOA
- Ethernet aggregation networks
- Ethernet interfaces
- CE-side load balancing
- changing of the operational status
- commands, See also show commands
- failing over to the redundant link
- IEEE 802.1Q
- IEEE 802.3ad
- L2TP
- link aggregation (LAG)
- link-fault management
- monitoring 1, 2, 3
- moving to the down state
- MPLS 1, 2
- multinetting
- OAM link-fault management
- on SRP modules
- operational states
- PPPoE over S-VLANs
- PPPoE over VLANs 1, 2
- S-VLANs 1, 2
- subnetwork attachment point (SNAP)
- VLANs
- Ethernet link aggregation
- Ethernet link aggregation commands
- Ethernet link redundancy
- Ethernet link redundancy commands
- Ethernet link-fault management
- Ethernet OAM link-fault management
- actions on exceeding high threshold
- configuring remote failure detection
- configuring, procedure
- disabling
- discovery, overview
- elements, overview
- enabling
- error message
- example
- features, understanding
- figure showing interconnection with LAG
- guidelines for configuring
- implementing
- Information OAM PDUs
- interrelationship with link aggregation sublayer
- Marker response PDUs
- modifying
- OAM client, functions of
- OAM link monitoring, overview
- OAM messages, overview
- OAM remote and local loopback mode
- OAM remote fault detection, overview
- overview
- performance impact
- performance impact and memory usage
- platform considerations
- platforms supported for
- prerequisite
- references for
- remote loopback start and stop settings
- setting
- slow protocols
- specifying
- action on exceeding high threshold, disabling interface
- action on exceeding high threshold, failover
- detection of remote failure conditions
- high threshold for frame error events
- high threshold for frame seconds summary error events
- high threshold for symbol error events
- interface type
- link events to monitor
- low threshold for frame error events
- low threshold for frame seconds summary error events
- low threshold for symbol error events
- mode of discovery
- PDU loss threshold before link-fault event is generated
- rate of transmission of Information OAM PDUs
- remote loopback functionality
- tracking of error frame events
- tracking of error frame second events
- tracking of symbol error events
- window for frame error events
- window for frame seconds summary error events
- window for symbol error events
- support for unified ISSU
- support on SRP Ethernet interfaces
- supported standards
- viewing
- warning message
- Ethernet OAM link-fault management commands
- ethernet oam lfm
- ethernet oam lfm high-threshold
- ethernet oam lfm link-monitor frame-seconds
- ethernet oam lfm link-monitor frame-seconds-summary
- ethernet oam lfm link-monitor symbol-period
- ethernet oam lfm mode
- ethernet oam lfm pdu-lost-threshold
- ethernet oam lfm pdu-transmit-interval
- ethernet oam lfm remote-failure
- ethernet oam lfm remote-loopback start
- ethernet oam lfm remote-loopback stop
- ethernet oam lfm remote-loopback supported
- show ethernet oam lfm discovery
- show ethernet oam lfm statistics
- show ethernet oam lfm status
- show ethernet oam lfm summary
- Ethernet OAM messages, See OAM messages
- Ethertype value, assigning to S-VLANs 1, 2, 3, 4, 5, 6
- Event notification OAM PDUs
- example 1, 2
- examples, configuration
- ATM 1483 subinterfaces, dynamic
- ATM VC classes 1, 2
- bridged Ethernet, dynamic
- bridged Ethernet, static
- Cisco HDLC
- IPoA, dynamic
- MLFR
- MLPPP, dynamic
- MLPPP, static 1, 2
- Multiclass MLPPP, dynamic
- Multiclass MLPPP, static
- PPPoE, dynamic 1, 2
- PPPoE, static 1, 2
- profiles for dynamic interfaces
- transparent bridging
- VLAN subinterfaces, dynamic 1, 2
- exporting ATM 1483 subinterface descriptions
- Extensible Authentication Protocol., See EAP
- external loopback
F
- F4 OAM cells, for ATM
- F5 OAM cells, for ATM
- failover
- Fast Ethernet interfaces
- Fast Ethernet modules
- configuring PPPoE
- specifying an interface 1, 2, 3, 4
- fault management, ATM
- Flags field
- flush, ATM OAM
- fragmentation
- Frame Relay packets
- MLPPP
- Multiclass MLPPP 1, 2
- frame errors
- Frame Relay
- configuring
- disabling interface
- end-to-end fragmentation and reassembly
- error frames
- framing
- interconnection and relationship of NNIs and subnetworks
- map class
- maximum payload size
- monitoring
- multicast addressing
- Network-to-Network Interface
- overview
- platform considerations
- SNMP link status processing
- unicast addressing
- User-to-Network Interface
- frame-relay commands, See also show frame-relay commands
- frame-relay class
- frame-relay description
- frame-relay fragment
- frame-relay interface-dlci ietf 1, 2
- frame-relay intf-type
- frame-relay keepalive
- frame-relay lmi-n391dte
- frame-relay lmi-n392dce
- frame-relay lmi-n392dte
- frame-relay lmi-n393dce
- frame-relay lmi-n393dte
- frame-relay lmi-t391dte
- frame-relay lmi-t392dce
- frame-relay lmi-type
- map-class frame-relay
- framing
- ATM interfaces
- capabilities of E Series routers 1, 2, 3
- POS interfaces
G
- GE-2 line modules
- GE-HDE line modules
- Gigabit Ethernet interfaces for E120 and E320 routers 1, 2, 3
- Gigabit Ethernet modules
- configuring MLPPP
- configuring PPPoE
- specifying an interface 1, 2, 3, 4, 5, 6
- grace period, dynamic encapsulation type lockout
- group (multicast) addressing
- groups, bridge., See bridge groups
H
- hash-based packet distribution with MLPPP
- HDLC (High-Level Data Link Control), Cisco., See Cisco HDLC
- HDLC (High-Speed Data Link Control)
- hdlc commands
- high availability
- and atm atm1483 subscriber command
- and subscriber command 1, 2, 3
- high threshold
- high threshold setting
- high threshold value
- High-Level Data Link Control., See Cisco HDLC
- High-Speed Data Link Control., See HDLC
- higher-level protocols over Ethernet
I
- IEEE 802.1Q
- IEEE 802.1w
- IEEE 802.1w (Rapid Reconfiguration of Spanning Tree)
- IEEE 802.3ad
- IEEE 802.3ad (Link Aggregation)
- IEEE 802.3ah OAM link-fault management, See Ethernet OAM link-fault management
- ILMI
- ILMI (integrated local management interface)
- inarp command 1, 2
- individual (unicast) addressing
- Information OAM PDUs
- bandwidth allocation for OAM traffic
- bidirectional transmission of
- components, overview
- contained TLV fields
- description of
- forwarding to the remote peer in cases
- loss threshold setting
- maximum transmission rate
- receipt by the remote peer
- reestablishment of OAM association
- restart of discovery
- scenario of OAM association failure
- timer setting
- transmission settings for, overview
- transmission to the remote entity
- using the Flags field of
- viewing
- with Link Fault event bit set
- integrated local management interface., See ILMI
- interface commands
- interface atm 1, 2, 3, 4, 5, 6, 7, 8, 9
- interface fastEthernet 1, 2, 3, 4, 5, 6
- interface gigabitEthernet 1, 2, 3, 4, 5, 6
- interface lag
- interface mlframe-relay
- interface mlppp 1, 2
- interface pos 1, 2, 3, 4
- interface serial
- Cisco HDLC interfaces
- Frame Relay interfaces 1, 2
- PPPoE interfaces
- interface tenGigabitEthernet 1, 2, 3, 4, 5, 6
- interface description
- Frame Relay interfaces
- POS interfaces 1, 2
- serial interfaces
- interfaces
- interfaces, monitoring
- internal loopback
- International Telecommunication Union., See ITU
- Internet Protocol Control Protocol., See IPCP
- interworking function, See IWF
- Inverse ARP
- IP addresses
- assigning to Cisco HDLC interfaces
- assigning to Frame Relay subinterfaces 1, 2
- assigning to PPP interface
- PPPoE interfaces 1, 2, 3
- ip commands
- ip (subscriber policies)
- ip access-routes
- ip address 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11
- ip auto-configure ip-subscriber
- ip auto-detect ip-subscriber
- ip directed-broadcast
- ip filter-options all
- ip igmp
- ip ignore-df-bit
- ip inactivity-timer
- ip mac-validate
- ip mtu
- ip nat
- ip policy
- ip redirects
- ip route-map ip-subscriber
- ip sa-validate
- ip tcp adjust-mss
- ip unnumbered 1, 2
- ip virtual-router
- IP over ATM., See IPoA
- IP over VLAN over bridged Ethernet
- IP profile
- IP routes, inserting dynamic routes intorouting table
- IPCP (Internet Protocol Control Protocol)
- IPoA (IP over ATM)
- configuring dynamic interfaces
- dynamic interfaces 1, 2
- IPv4 and IPv6 over Static PPPoE
- IPv6
- ipv6 commands
- IPv6 neighbor discovery commands
- IPv6 profile
- ITU (International Telecommunication Union) recommendation, ATM OAM standards
- IWF
- IWF PPPoE sessions
- IWF PPPoE tag
- IWF-Session DSL Forum VSA
J
K
L
- L2TP (Layer 2 Tunneling Protocol)
- profile characteristics
- using PPPoE remote circuit ID 1, 2
- l2tp commands
- L2TP Proxy Authenticate Extensions for EAP—draft-ietf-l2tpext-proxy-authen-ext-eap-01.txt (December 2006 expiration)
- LACP (Link Aggregation Control Protocol)
- PPPoE subinterfaces 1, 2
- redundant member link behavior
- LAG bundle
- LAG member link
- LAG multiplexer
- layer 2 services over MPLS
- Layer 2 Tunneling Protocol., See L2TP
- LCP (Link Control Protocol)
- Link Control Protocol., See LCP
- link events
- link fault
- Link fault information OAM PDUs
- Link Integrity Protocol., See LIP
- link monitoring
- link monitoring, of Ethernet interfaces, See OAM link monitoring
- link-fault event
- link-fault management commands
- link-fault management, Ethernet interfaces, See Ethernet OAM link-fault management
- LIP (Link Integrity Protocol)
- LMI (local management interface)
- configuring counters and timers
- configuring type
- enabling
- monitoring 1, 2, 3
- load-interval command
- local loopback mode, See OAM loopback mode
- local management interface., See LMI;ILMI
- local OAM entity
- lockout, encapsulation type., See dynamic encapsulation type lockout
- log severity debug command 1, 2
- loopback
- loopback command
- Loopback control OAM PDUs
- loopback for ATM VC integrity
- cells
- configuring 1, 2
- F4 OAM cells
- handling of received cells
- loopback frames
- lost-link timer
- low threshold
- low threshold value
M
- MAC (media access control) addresses
- MAC address
- macro command
- macros
- magic numbers
- manuals
- map class, Frame Relay fragmentation
- map entries, Frame Relay 1, 2
- map list, using to configure NBMA interfaces
- map-class frame-relay command
- map-group command
- map-list command
- Marker response OAM PDUs
- maximum payload size, Frame Relayfragmentation
- maximum receive unit., See MRU
- media access control addresses, See MAC addresses
- member-interface command 1, 2, 3
- message of the minute messages., See MOTM messages
- MFR
- MLFR (Multilink Frame Relay)
- MLP., See MLPPP
- MLPPP (Multilink PPP), See also ppp commands
- aggregating T1 or E1 lines
- aggregation limits
- authentication
- bundle 1, 2
- bundle limits
- bundle name and RADIUS
- commands, contextual differences of
- configuring
- ECMP
- encapsulation
- endpoint discriminator
- features
- fragmentation
- interface stacking
- interfaces, monitoring
- member link sequence numbers
- MRRU
- NxT1 service
- overview
- packet distribution
- platform considerations
- profiles
- protocol layering
- reassembly
- SSN header format
- statistics and baselining
- unsupported features
- modules
- monitor commands
- monitoring., See specific feature, product, or protocol
- MOTM (message of the minute) messages
- MP., See MLPPP
- MPLS (Multiprotocol Label Switching)
- configuring over Ethernet link aggregation
- configuring S-VLAN tunnels 1, 2
- mpls commands
- MPLS over VLAN over bridged Ethernet
- MRRU LCP configuration option
- MRU (maximum receive unit)
- POS interfaces
- PPP interfaces 1, 2
- mru command
- MTU (maximum transmission unit), See MTU
- mtu command
- multicast addressing
- multicast command
- Multiclass MLPPP
- configuration guidelines
- configuring
- enabling
- example, dynamic
- example, static
- fragmentation 1, 2, 3
- monitoring
- overview
- platform considerations
- reassembly 1, 2, 3
- traffic-class 1, 2, 3, 4
- Multilink Frame Relay., See MLFR
- multilink maximum received reconstructed unit (MRRU)
- Multilink PPP., See MLPPP
- multinetting
- multiplexer
- multipoint, ATM connections 1, 2
N
- NBMA
- NBMA (nonbroadcast multiaccess)
- nested profile assignments
- NNI (Network-to-Network Interface),Frame Relay 1, 2, 3
- nonbroadcast multiaccess., See NBMA
- notice icons
- NxT1 service
O
- OAM (Operation, Administration, and Management), ATM
- OAM association
- OAM client
- oam commands
- OAM discovery
- automatic activation of
- configuration at the interface level
- controlling other OAM attributes for an entity
- enabling on an interface
- exceeding of PDU loss threshold
- first phase of OAM association
- implementation of
- interconnection with
- monitoring the remote peer
- restarting of
- restriction on performing
- successful rediscovery with the remote peer
- supported types
- topology for configuration of
- OAM discovery mode
- OAM elements
- OAM features
- OAM link monitoring
- actions on high threshold excess
- advertisement of OAM attributes
- continuation with a new window
- detecting frame and symbol errors
- error frame seconds summary
- error frames per second
- error symbols per second
- example, configuring
- generation of Event notification OAM PDUs
- health and quality analysis of the link
- improving failover and recovery times
- influencing the link state
- influencing the operational link state
- overview of feature
- period for detecting errors
- physical redundancy
- repeated sending of Event notification PDUs
- supported error events
- supported frame errrors tracked
- symbol errors counting
- threshold for frame, symbol errors
- using Event notification OAM PDUs
- using the results of
- viewing configured values
- OAM link-fault event, See link-fault event
- OAM link-fault management, See Ethernet OAM link-fault management
- OAM link-fault management, 802.3ah
- OAM loopback mode
- cessation by the initiating entity
- configuring
- higher priority for OAM PDUs
- in disabled state
- in enabled state
- initiation phase
- intentional discard of data frames
- local and remote functionalities
- preventing loopback on both local and remote entities
- processing of OAM PDUs
- remote
- settings for enabling and disabling remote loopback
- viewing configuration
- warning message
- OAM messages
- format of
- format of, figure
- forwarding to the control block
- higher priority over data traffic
- length of untagged frames
- maximum transmission rate
- processing by multiplexer
- processing by the packet parser
- processing during remote loopback
- properties of
- rules management of received
- supported types
- transmission of
- transmission rate and
- with link-fault event bit in Flags field
- OAM PDU loss threshold
- OAM PDU transmission rate
- OAM PDUs, See OAM messages
- OAM remote failure monitoring, See OAM remote fault detection
- OAM remote fault detection
- OAM remote loopback settings
- OAM session
- OAM state machine
- OAM sublayer
- OAM traffic
- OC3 modules
- OCx/STMx interfaces
- Operation, Administration, and Maintenance, Ethernet interfaces, See Ethernet OAM link-fault management
- Operation, Administration, and Management., See OAM, ATM
- option 82 field, DHCP
- OSI Network Layer Control Protocol., See OSINLCP
- OSINLCP (OSI Network Layer Control Protocol)
- overriding base profile assignments
- oversubscription
- oversubscription of allotted bandwidth
P
- packet logging, PPP and PPPoE
- packet over SONET., See POS
- packet parser
- PADM (PPPoE Active Discovery Message), configuring
- PADN (PPPoE Active Discovery Network) messages, configuring
- padn command
- PADR (PPPoE Active Discovery Request)
- PADS (PPPoE Active Discovery Session) packets, configuring
- PAP (Password Authentication Protocol)
- passive discovery mode
- Password Authentication Protocol., See PAP
- payload, ATM cell
- PCR (peak cell rate)
- PDU loss threshold, See OAM PDU loss threshold
- performance impact
- performance variables
- permanent virtual circuit., See PVC
- physical level redundancy
- physical link redundancy
- ping atm interface atm command
- ping, ATM
- platform considerations
- point-to-multipoint, NBMA connection
- Point-to-Point Protocol over ATM., See PPPoA
- Point-to-Point Protocol over Ethernet., See PPPoE
- Point-to-Point Protocol., See PPP
- policies, subscriber., See subscriber policies for transparent bridging
- policy commands
- policy management
- POS (packet over SONET)
- pos commands
- pos description 1, 2, 3
- pos framing
- pos scramble-atm
- PPP (Point-to-Point Protocol)
- accounting statistics for terminated sessions
- Async-Control-Character-Map (ACCM) option
- authentication 1, 2, 3
- configuring
- configuring dynamic interfaces
- E120 and E320 routers 1, 2
- E320 routers
- EAP
- Extensible Authentication Protocol
- interfaces
- magic numbers
- monitoring interfaces
- network control protocol
- packet logging
- platform considerations
- PPP profiles
- troubleshooting
- ppp commands, See also show ppp commands
- ppp aaa-profile
- ppp authentication 1, 2, 3
- ppp chap-challenge-length 1, 2
- ppp description
- ppp fragmentation 1, 2
- ppp hash-link-selection (MLPPP) 1, 2
- ppp initiate-ip
- ppp initiate-ipv6
- ppp ipcp netmask
- ppp keepalive 1, 2
- ppp keepalive (MLPPP)
- ppp log 1, 2
- ppp log (MLPPP)
- ppp magic-number disable 1, 2
- ppp magic-number disable (MLPPP)
- ppp magic-number ignore-mismatch 1, 2, 3
- ppp max-bad-auth
- ppp max-bad-auth (MLPPP)
- ppp max-negotiations 1, 2, 3
- ppp mru 1, 2, 3
- ppp multilink enable (MLPPP) 1, 2, 3
- ppp passive-mode 1, 2
- ppp passive-mode (MLPPP)
- ppp peer 1, 2, 3
- ppp peer (MLPPP)
- ppp reassembly 1, 2
- ppp shutdown
- ppp shutdown (MLPPP)
- ppp shutdown ip
- ppp shutdown mpls
- ppp shutdown osi
- PPP Multilink., See MLPPP
- PPPoA (Point-to-Point Protocol over ATM)
- PPPoE
- PPPoE (Point-to-Point Protocol over Ethernet)
- Active Discovery Initiation (PADI) packets
- Active Discovery Message (PADM)
- Active Discovery Network (PADN) messages
- Active Discovery Offer (PADO) packets
- Active Discovery Request (PADR) packets
- Active Discovery Session (PADS) packets 1, 2
- agent-circuit-identifier information
- capturing remote circuit ID
- configuring
- dsl-forum-1 format and examples 1, 2
- formatting 1, 2
- monitoring
- overview
- sending to RADIUS or L2TP 1, 2
- troubleshooting
- using in profiles 1, 2
- configuring dynamic interfaces over ATM
- configuring dynamic interfaces over PPPoE
- configuring for Ethernet 1, 2
- configuring over ATM
- Discovery protocol
- DSL Forum VSA 26-1
- duplicate protection of
- duplicate protection scenarios for IWF PPPoE sessions
- dynamic encapsulation type lockout, See also and IWF PPPoE sessions
- E120 and E320 routers 1, 2
- monitoring interfaces
- overview
- packet logging
- platform considerations
- subinterfaces for LACP 1, 2
- troubleshooting
- PPPoE access concentrator
- pppoe commands, See also show pppoe commands
- encapsulation pppoe
- pppoe 1, 2, 3, 4
- pppoe (subscriber policies)
- pppoe acname 1, 2, 3
- pppoe always-offer
- pppoe auto-configure
- pppoe auto-configure lockout-time
- pppoe clear lockout interface
- pppoe duplicate-protection 1, 2, 3
- pppoe log pppoeControlPacket
- pppoe motm 1, 2, 3, 4
- pppoe pads disable-ac-info
- pppoe profile
- pppoe remote-circuit-id 1, 2
- pppoe service-name-table 1, 2, 3, 4
- pppoe sessions 1, 2
- pppoe subinterface 1, 2, 3
- pppoe subinterface fastEthernet
- pppoe subinterface gigabitEthernet
- pppoe subinterface lag
- pppoe subinterface tenGigabitEthernet
- pppoe url 1, 2, 3
- service
- PPPoE over S-VLAN over bridged Ethernet
- PPPoE over VLAN over bridged Ethernet
- PPPoE service name tables
- PPPoE sessions
- precedence levels for VC classes
- prerequisite
- privilege level
- profile commands, See also show profile commands
- profile 1, 2, 3, 4, 5, 6, 7, 8, 9
- profile atm1483 bulk-config-name 1, 2
- profile atm1483 bulk-config-name pvc
- profile vlan bulk-config
- profile vlan override
- profile-reassign 1, 2, 3
- vlan profile 1, 2
- vlan service-profile
- profiles
- assigning to a static interface
- assigning to an interface
- characteristics for
- creating for debugging
- description 1, 2
- for dynamic ATM 1483 subinterfaces
- for dynamic VLAN subinterfaces
- monitoring 1, 2
- overriding base profile assignments 1, 2, 3, 4
- reassigning for troubleshooting
- using to configure dynamic interfaces
- working with
- protocol data units (PDUs)
- proxy ARP
- PVC (permanent virtual circuit)
- pvc command
R
- RADIUS (Remote Authentication Dial-In User Service)
- authentication of dynamic interfaces 1, 2, 3
- configuring dynamic interfaces from
- MLPPP Bundle Name VSA
- overriding attributes for PPPoE 1, 2
- using PPPoE remote circuit ID 1, 2
- radius commands
- radius override calling-station-idremote-circuit-id
- radius override nas-port-id remote-circuit-id
- radius remote-circuit-id-delimiter 1, 2
- radius remote-circuit-id-format 1, 2
- radius remote-circuit-id-format (dsl-forum-1 keyword) 1, 2
- ranges, VC., See VC ranges, bulk configuration of
- ranges, VLAN, See VLAN ranges, bulk configuration of RDI (remote defect indication) cells
- RDI (remote defect indication) cells 1, 2
- reassembly
- Frame Relay packets
- MLPPP
- Multiclass MLPPP 1, 2
- reassigning profiles to dynamic interfaces
- relearn command
- remote circuit ID, capturing for PPPoE
- configuring
- dsl-forum-1 format and examples 1, 2
- formatting 1, 2
- monitoring
- overview
- sending to RADIUS or L2TP 1, 2
- troubleshooting
- using in profiles 1, 2
- remote defect indication cells., See RDI cells
- remote loopback mode, See OAM loopback mode
- remote loopback operation
- remote loopback request
- remote OAM entity
- remote OAM peer
- round-robin packet distribution with MLPPP
- route interface command
- routing, configuring for transparent bridging
- RSTP (Rapid Spanning Tree Protocol)
S
- S-VLAN tags
- S-VLANs (stacked virtual local area networks)
- scrambling ATM cell payload
- scripts
- SDH (Synchronous Digital Hierarchy) 1, 2
- serial description command
- serial interfaces
- Serial Line Address Resolution Protocol., See SLARP
- service category, configuring for PVCs
- service name tables, PPPoE., See PPPoE service name tables
- SFPs (small form-factor pluggable transceivers) 1, 2
- short sequence number (SSN) header format
- show aaa commands
- show atm commands
- show atm aal5 interface 1, 2, 3
- show atm atm1483
- show atm bulk-config
- show atm interface
- show atm map 1, 2
- show atm oam
- show atm ping
- show atm subinterface 1, 2, 3, 4
- show atm vc 1, 2, 3
- show atm vc atm
- show atm vc-class
- show atm vp
- show atm vp-description
- show atm vp-tunnel 1, 2, 3, 4
- show nbma arp
- show bridge commands
- show bridge1483 interface command
- show columns command 1, 2
- show frame-relay commands
- show hdlc interface command
- show interfaces commands
- show interfaces fastEthernet 1, 2
- show interfaces gigabitEthernet 1, 2
- show interfaces lag
- show interfaces lag members
- show interfaces pos
- show interfaces tenGigabitEthernet 1, 2
- show ip mac-validate command
- show mpls cross-connects atm command
- show ppp commands
- show ppp interface
- show ppp interface mlppp
- show ppp interface summary 1, 2
- show pppoe commands
- show pppoe interface 1, 2, 3
- show pppoe interface lockout-time 1, 2
- show pppoe interface summary
- show pppoe subinterface 1, 2, 3
- show pppoe subinterface summary
- show profile commands
- show radius commands
- show subscriber-policy command
- show vlan commands
- show vlan bulk-config
- show vlan subinterface 1, 2, 3
- show vlan subinterface command
- shutdown command
- dynamic interfaces 1, 2
- Frame Relay
- POS
- shutting down interfaces
- Simple Network Management Protocol., See SNMP link status processing
- SLARP (Serial Line Address Resolution Protocol), See also Cisco HDLC
- slow protocols
- SMs (Service modules)
- SNAP (subnetwork attachment point)
- SNMP (Simple Network Management Protocol) link status processing
- snmp trap frame-relay link-status command
- SONET (Synchronous Optical Network) 1, 2, 3
- source, clock
- SRP Ethernet interfaces
- SSN LCP (short sequence number Link Control Protocol) configuration option
- stacked virtual local area networks., See S-VLANs
- stateful SRP switchover
- and atm atm1483 subscriber command
- and subscriber command 1, 2, 3
- Ethernet link-fault management
- dependence on completion time
- effect on OAM settings
- of more than 2 seconds
- recommendation for high and low threshold configuration 1, 2
- recommendation for PDU loss threshold setting
- static interfaces
- configuring Multiclass MLPPP
- creating in VC subranges 1, 2
- creating in VLAN subranges
- static mapping, and NBMA interfaces
- subinterfaces
- subnet mask
- subnetwork attachment point., See SNAP
- subranges, VC., See VC subranges
- subscriber command 1, 2, 3, 4, 5, 6, 7, 8, 9
- subscriber management, using for subscriber authentication 1, 2
- subscriber policies for transparent bridging, See also subscriber policy commands
- subscriber policy commands
- subscribers
- authenticating on dynamic bridged Ethernet interfaces 1, 2, 3
- identifying for PPPoE
- support, technical, See technical support
- SVC (switched virtual circuit)
- svlan commands
- switch, 802.3ad
- switched virtual circuit., See SVC
- symbol errors
- symbol period errors
- Synchronous Digital Hierarchy., See SDH
- Synchronous Optical Network., See SONET
- system
- system clock
T
- technical support
- terminated PPP session accounting statistics
- text and syntax conventions
- traffic management, ATM
- traffic-class
- traffic-shaping parameters
- transmit clock source, configuring
- transparent bridging., See bridging, transparent
- troubleshooting interfaces
- dynamic PPP and PPPoE
- PPP
- PPPoE 1, 2
- TSMs (Tunnel Service modules)
U
- ubr command 1, 2
- UNI (User-Network Interface) version 1, 2, 3, 4, 5
- unicast addressing
- unicast command
- unified ISSU
- Uniform Resource Locator messages., See URL messages
- unknown- commands
- Unsupported OAM PDUs
- URL (Uniform Resource Locator) messages
- User-Network Interface., See UNI version
V
- vbr commands
- VC (virtual channel)
- VC (virtual circuit), monitoring
- VC classes
- VC ranges, bulk configuration of
- VC subranges
- vc-class atm command
- VCC (virtual channel connection)
- VCD (virtual circuit descriptor) 1, 2
- VCI (virtual channel identifier) 1, 2, 3
- vendor OUI TLV
- vendor-specific attributes., See VSAs
- vendor-specific information
- Vendor-specific OAM PDUs
- versions
- virtual channel connection., See VCC
- virtual channel identifier., See VCI
- virtual channel., See VC
- virtual circuit descriptor., See VCD
- virtual circuit identifier (VCI) tags
- virtual circuit., See VC, monitoring
- virtual connections, ATM
- virtual local area networks., See VLANs
- virtual path connection., See VPC
- virtual path descriptions, assigning
- virtual path identifier (VPI) tags
- virtual path identifier., See VPI
- virtual path tunnels., See VP tunnels, ATM
- virtual path., See VP, monitoring
- virtual-router command
- vlan commands
- encapsulation vlan
- monitor vlan interface
- profile vlan override
- vlan advisory-rx-speed 1, 2
- vlan advisory-tx-speed 1, 2
- vlan auto-configure 1, 2
- vlan auto-configure agent-circuit-identifier 1, 2
- vlan bulk-config 1, 2, 3
- vlan bulk-config modify
- vlan bulk-config shutdown
- vlan description 1, 2
- vlan id 1, 2
- vlan profile 1, 2
- vlan service-profile
- VLAN subinterfaces
- VLAN subinterfaces, dynamic
- benefits of using
- bulk configuration of VLAN ranges
- changing VLAN subranges 1, 2
- configuring
- configuring with agent-circuit-identifier information 1, 2
- creating static VLAN interfaces in VLAN subranges
- monitoring
- overriding base profile assignments
- overview
- profiles for
- VLAN subranges
- VLANs (virtual local area networks)
- bridged Ethernet configurations
- configuring
- configuring dynamic subinterfaces for
- configuring for dynamic IP
- configuring for dynamic PPPoE
- configuring IPv4 and IPv6 over dynamic PPPoE
- configuring to support dynamic PPPoE
- displaying status 1, 2
- IP over VLAN over bridged Ethernet
- monitoring
- MPLS over VLAN over bridged Ethernet
- overview
- PPPoE over VLAN over bridged Ethernet
- VP (virtual path) tunnels, ATM
- VP (virtual path), monitoring
- VPC (virtual path connection)
- VPI (virtual path identifier) 1, 2, 3
- VSAs (vendor-specific attributes)
W
X
