Configuring Simple Shared Shaper Algorithm Variables

To configure the variables for all simple shared shapers on the router:

Enter QoS Shared Shaper Control Configuration mode.
host1(config)#qos-shared-shaper-control host1(config-qos-shared-shaper-control)#
(Optional) Configure the convergence factor for all simple shared shapers on the router.
host1(config-qos-shared-shaper-control)#convergence-factor 25
The convergence factor determines how quickly the dynamic shaping rate converges with the calculated dynamic shaping rate, and is expressed as a percentage of the available bandwidth.
The range for the convergence factor is 0–99 percent, with 0 being the most liberal and 99 the most conservative. The default value is 50.
(Optional) Configure the specify the reaction factor for all simple shared shapers on the router.
host1(config-qos-shared-shaper-control)#reaction-factor 50
The reaction factor determines how the shared shaper reacts to changes in the measured rate.
The range for the reaction factor is 0–1000; 0 is the most liberal and 1000 is the most conservative. The default value is 200.
(Optional) Specify the minimum value of the dynamic shaping rate as a percentage of the shared shaping rate for all simple shared shapers on the router.
host1(config-qos-shared-shaper-control)#minimum-dynamic-rate-percent 50
The range for the minimum dynamic rate value is 0–100 percent. The default value is 0.
(Optional) Configure a maximum value for the virtual output queue length (VOQL) for all simple shared shapers on the router.
host1(config-qos-shared-shaper-control)#maximum-voql 25
The VOQL tracks the amount of data over queued between simple shared-shaper rate periods.
The range for the maximum VOQL value is 0–10000 milliseconds (ms). The default value is 4000.

Configuring Simple Shared Shaper Algorithm Variables

Related Documentation