show log data

Syntax

show log data [ nv-file | category eventCategory ]
[ severity { severityValue | severityNumber } ] [ delta ] [ filter ]

Release Information

Command introduced before JunosE Release 7.1.0.

Description

Displays the system log.

Options

• nv-file—Displays the nv-file log
• eventCategory—Log category to display; refer to the CLI online help for available options
• severity—Minimum severity of the log messages displayed; described either by a descriptive term—severityValue—or by a corresponding number—severityNumber—in the range 0–7; the lower the number, the higher the priority:
  • emergency or 0—System unusable
  • alert or 1—Immediate action needed
  • critical or 2—Critical condition exists
  • error or 3—Error condition
  • warning or 4—Warning condition
  • notice or 5—Normal but significant condition
  • info or 6—Informational message
  • debug or 7—Debug message
• delta—Limits the display to events that occurred after the baseline
• filter—See Filtering show Commands

Mode

Privileged Exec, User Exec