show ip tunnel-route

Syntax

show ip tunnel-route [ vrf vrfName ] [ destination [ ipMask ] [ detail ] ]
[ all ] [ protocol ] [ filter ]

Release Information

Command introduced in JunosE Release 7.1.0.

Description

Displays current state of the IPv4 tunnel routing table.

Options

• vrfName—Contents of the IPv4 tunnel routing table associated with a VRF
• destination—IP address or domain name of the host to show
• ipMask—IP mask of the specific address to show
• detail—Displays detailed information about the specific prefix
• all—Displays all routes in the IPv4 tunnel routing table inserted from all protocols, not just the best routes
• protocol—One of the following protocols for which you want to display the best route or all routes in the tunnel routing table; no routes are displayed if routes for the specified protocol are not present in the tunnel routing table

  Note: Other protocol options are available in the CLI, but they are not applicable to the tunnel routing table.

  • bgp-tunnel—Displays the BGP tunnel routes in the tunnel routing table
  • ldp—Displays the LDP tunnel routes in the tunnel routing table
  • rsvp—Displays the RSVP tunnel routes in the tunnel routing table
• filter—See Filtering show Commands

Mode

Privileged Exec, User Exec