path overhead j1

Syntax

For channelized OCx/STMx interfaces:

[ no ] path pathChannel overhead j1 { msg | exp-msg } [ message ]

For unchannelized OCx/STMx interfaces:

[ no ] path overhead j1 { msg | exp-msg } [ message ]

Release Information

Command introduced before JunosE Release 7.1.0.

Description

Specifies trace messages to check for connectivity between the router and the SONET/SDH device at the other end of the line. The no version restores the default situation, in which all characters of the trace message are zeros.

Options

• pathChannel—Number, in the range 1–2147483648, that identifies the path on a channelized interface
• msg—Specifies that the message is one that the router sends
• exp-msg—Specifies that the message is one that the router expects to receive
• message—Text of the message; the maximum is 15 characters for SDH mode and 62 characters for SONET mode

Mode

Controller Configuration