path ds3 snmp trap link-status

Syntax

[ no ] path pathChannel ds3 ds3Channel snmp trap link-status

Release Information

Command introduced before JunosE Release 7.1.0.

Description

Enables SNMP link status processing for a DS3 signal. This command applies to a DS3 over channelized SONET interface. The no version disables SNMP link status processing on an interface.

Options

• pathChannel—Number, in the range 1–2147483648, that identifies the path
• ds3Channel—Number, in the range 1–3, that identifies the path

Mode

Controller Configuration