path ds1|e1

Syntax

path pathChannel { ds1 | e1 } tributaryIdentifier [ tributaryType ]

[ no ] path pathChannel { ds1 | e1 } tributaryIdentifier [ tributaryType ]

Release Information

Command introduced before JunosE Release 7.1.0.

Description

Creates and configures SONET and SDH tributaries. The no version deletes a tributary.

Options

• pathChannel—Number, in the range 1–2147483648, that identifies the path
• tributaryIdentifier—Specifier for the tributary in the format
  pathChannel { ds1 | e1 } pathPayload/tributaryGroup/tributaryNumber
  • pathPayload—Payload number for the path; value is 1 for SONET and in the range 1–3 for SDH
  • tributaryGroup—Number, in the range 1–7, that identifies the group within the path
  • tributaryNumber—Number of the tributary within the tributary group; the value is in the range 1–4 if the tributary type is vt15 or tu11 and in the range 1–3 if the tributary type is tu12
• tributaryType—Virtual tributary type
  • vt15—Default for SONET DS1 tributaries
  • tu11—Default for SDH DS1 tributaries
  • tu12—Default for SDH E1 tributaries

Mode

Controller Configuration