neighbor timers

Syntax

neighbor { ipAddress | ipv6Address | peerGroupName } timers keepaliveTime holdTime

no neighbor { ipAddress | ipv6Address | peerGroupName } timers [ keepaliveTime ]
[ holdTime ]

Release Information

Command introduced before JunosE Release 7.1.0.
ipv6Address variable added in JunosE Release 8.0.0.

Description

Sets keepalive and hold-time timers for the specified neighbor or peer group. Overrides values set for the router with the timers bgp command. The no version restores the default values.

Options

• ipAddress—IP address of BGP neighbor
• ipv6Address—IPv6 address of BGP neighbor
• peerGroupName—Name of a BGP peer group. If you specify a BGP peer group by using the peerGroupName argument, all the members of the peer group inherit the characteristic configured with this command, unless it is overridden for a specific peer.
• keepaliveTime—Interval in seconds between keepalive messages, in the range 0–65535 seconds; default value is 30 seconds; a value of zero prevents BGP from sending keepalive messages
• holdTime—Period in seconds that BGP waits for keepalive messages before declaring the neighbor to be unavailable, in the range 0–65535 seconds; default value is 90 seconds; a value of zero informs BGP not to expect any keepalive messages

Mode

Address Family Configuration, Router Configuration