ipv6 ospf priority

Syntax

ipv6 ospf [ processId ] priority intfPriority

no ipv6 ospf [ processId ] priority

Release Information

Command introduced before JunosE Release 7.1.0.

Description

Sets the router priority. Used in determining the designated router for the particular network. This designation applies only to multiaccess networks. Every broadcast and nonbroadcast multiaccess network has a designated router. The no version restores the default value.

Options

• processId—Integer in the range 1–65535
• intfPriority—Priority value, an 8-bit number in the range 1–255; default value is 1

Mode

Interface Configuration, Subinterface Configuration