Hide Navigation Pane
Show Navigation Pane
Feedback
Download
SHA1
Monitoring Subscriber Information
Purpose
Display the active subscribers on the router. If you specify a username, the router displays only the users that match. When you issue the command in the default VR, all users are displayed. When you issue the command in a nondefault VR, only those users attached to that VR are displayed. The following list describes keywords that you can use with the show subscribers command:
- You can use the domain, interface, port, slot, username, or virtual-router keywords on all routers to filter the results. If you do not use a keyword, all active users are displayed.
- When you use the interface keyword to display detailed subscriber information by interface, you must also specify the atm, ethernet, or lag keyword, an interface specifier, and optionally a subinterface specifier.
- If you specify the lag keyword, the output displays active subscribers for the specified LAG interface. By default, the aaa intf-desc-format include sub-intf enable command includes the subinterface and S-VLAN ID in the LAG interface ID. Use the aaa intf-desc-format include sub-intf disable command to exclude the subinterface and S-VLAN ID from the LAG interface ID.
- The output displayed in the interface field depends on
the configuration of two commands at the time the subscriber logs
in: aaa intf-desc-format include sub-intf and aaa intf-desc-format include
adapter (for the E120 and E320 Broadband Services Routers).
- When the aaa intf-desc-format include sub-intf disable command has been issued, the subinterface is stripped from the subscriber’s interface field at login and is not displayed in the output. In the default state, or when the aaa intf-desc-format include sub-intf enable command has been issued, the subinterface is included in the subscriber’s interface field at login, and is displayed in the output.
- When the aaa intf-desc-format include adapter disable command has been issued, the adapter is stripped from the subscriber’s interface field at login and is not displayed in the output. In the default state, or when the aaa intf-desc-format include adapter enable command has been issued, the adapter is included in the subscriber’s interface field at login and is displayed in the output.
- Even when the subinterface has been stripped from the subscriber’s interface field, you can still include the subinterface specifier in the show subscribers interface command. Even though the subinterface itself is not displayed, only subscribers on the specified subinterface are displayed.
- These considerations do not apply when you issue the summary keyword. The output displayed in the Interface field of summary versions is not affected by the state of either the aaa intf-desc-format include sub-intf command or the aaa intf-desc-format include adapter command when the subscriber logs in.
- You can use the ipv6 keyword to display all IPv6 subscribers or include the IPv6 prefix to limit the display to only IPv6 subscribers on a specific network.
- You can use the icr-partition keyword to display the active subscribers for a particular ICR partition configured on a chassis.
- You can use the summary keyword to display only summary information about active subscribers.
Action
To display general subscriber information:
host1# show subscribers
Subscriber List
----------------
Virtual
User Name Type Addr|Endpt Router
----------------------- ----- -------------------- ------------
fred tst 10.10.65.86/radius default
bert tst 192.168.10.3/user default
User Name Interface
----------------------- --------------------------------
fred atm 2/1.42:100.104
bert FastEthernet 5/2.4
User Name Login Time Circuit Id
----------------------- ------------------- ----------------
fred 06/05/12 10:58:42 atm 5/1.3
bert 06/05/12 10:59:08
User Name Remote Id
----------------------- ----------------
fred
bert (800) 555-1212
To display detailed information for subscribers on the specified interface:
host1# show subscribers interface ethernet 5/2
Subscriber List
---------------
Virtual
User Name Type Addr|Endpt Router
------------------------ ----- -------------------- ------------
bert tst 192.168.10.3/user default
User Name Interface
------------------------ --------------------------------
bert FastEthernet 5/2.4
User Name Login Time Circuit Id
------------------------ ------------------- ----------------
bert 06/05/12 10:59:08
User Name Remote Id
----------------------- ----------------
bert (800) 555-0000
To display detailed information for subscribers on the specified LAG interface:
host1# show subscribers interface lag lag2.1:1-1
Subscriber List --------------- User Name Type Addr|Endpt Router ------------- ----- ----------- --------- 4101DHCPCLIENT@CT.NET ip 2.0.0.3/user default User Name Interface ------------------------ ------------ 4101DHCPCLIENT@CT.NET lag lag2.1:1-1 User Name Login Time Circuit Id ------------------------ ------------------- ---------------- 4101DHCPCLIENT@CT.NET 09/10/29 02:07:51 User Name Remote Id ------------------------ ---------------- 4101DHCPCLIENT@CT.NET
To display detailed information for subscribers on the specified slot:
host1# show subscribers slot 5
Subscriber List
---------------
Virtual
User Name Type Addr|Endpt Router
------------------------ ----- -------------------- ------------
fred tst 10.10.65.86/radius default
User Name Interface
------------------------ --------------------------------
fred atm 5/1.42:100.104
User Name Login Time Circuit Id
------------------------ ------------------- ----------------
fred 06/05/12 10:58:42 atm 5/1.3
User Name Remote Id
----------------------- ----------------
fred
To display the number of subscribers on each virtual router, as well as the total and peak subscribers for the chassis:
host1#show subscribers summary Virtual Router Subscribers Ppp Ip Tnl Total ------------ ------------ ------ ------ ------ ------ default 1 1 0 0 1 Total Subscribers : 10 (chassis-wide total) Peak Subscribers : 15 (chassis-wide total)
To display the number of subscribers on each port:
host1#show subscribers summary port Interface Count ------------ ------ 3/1 5 2/1 5 Total Subscribers : 10 (chassis-wide total) Peak Subscribers : 15 (chassis-wide total)
To display the number of subscribers by domain name:
host1#show subscribers summary domain
Domain Name Count
-------------------------------- ------
abc.com 5
iii.com 5
Total Subscribers : 10 (chassis-wide total)
Peak Subscribers : 15 (chassis-wide total) To display the number of subscribers by interface:
host1#show subscribers summary interface Interface Count -------------------- ----- ATM 3/2.1 1 ETHERNET 5/2.1 2 LAG lag1.100 1 Total Subscribers: 4 (chassis-wide total) Peak Subscribers: 8 (chassis-wide total)
To display the number of subscribers by slot:
host1#show subscribers summary slot Slot Count -------- ----- 3 1 5 4 Total Subscribers : 5 (chassis-wide total) Peak Subscribers : 8 (chassis-wide total)
To display the number of subscribers by ICR partition:
host1#show subscribers summary icr-partition
ICR-Partition (location-id) Count
-------------------------------------------- --------
3/0.1.4 5
3/0.2.5 5
Total Subscribers: 10 (chassis-wide total)
Peak Subscribers: 15 (chassis-wide total)
Meaning
Table 32 lists the show subscribers command output fields.
Table 32: show subscribers Output Fields
Field Name | Field Description |
|---|---|
User Name | Name of the subscriber |
Type | Type of subscriber: atm, ip, ipsec, ppp, tnl (tunnel), tst (test) |
Addr | Endpt | IP or IPv6 address and source of the address: l2tp, local, dhcp, radius, user. For local, dhcp, radius, and user endpoints, the address is that of the user. When the endpoint is l2tp, the address is that of the LNS. |
Virtual Router | Name of the virtual router context |
Interface | Interface specifier over which the subscriber is connected |
Login Time | Date, in YY/MM/DD format, and time the subscriber logged in |
Circuit Id | User circuit ID value specified by PPPoE |
Remote Id | User remote ID value specified by PPPoE |
Total Subscribers | Number of active subscribers, chassis-wide |
Peak Subscribers | Maximum value of the Total Subscriber field during the time the router has been active, chassis-wide |
Subscribers | Number of subscribers; the sum of the Ppp and Ip fields |
Ppp | Number of PPPoA and PPPoE users, combined |
Ip | Number of DHCP and IP subscriber manager users, combined |
Tnl | Number of users tunneled to an LNS |
Total | Total number of users per virtual router; the sum of the Ppp, Ip, and Tnl fields |
Domain Name | Domain name used by the subscriber |
ICR-Partition (location-id) | A unique identifier for each ICR partition on a chassis. Note that this ID different from the partition name, which is configured using the ip vrrp vrid icr-partitionpartitionName command. |
Count | Number of subscribers |
Slot | Number of slot in the chassis |
