GE 1000Base-ZX Module Combination (1 Port) (256-MB Memory)

Line module label	GE/FE
I/O module label	GE I/O SFP
Number of I/O ports	1 active, 1 redundant
Software release	First supported: 5.0.0 Final supported: Not applicable
Description	130 W Gigabit Ethernet 256 MB of memory The 128-MB version has reached end-of-life. The I/O module uses a range of small form-factor pluggable (SFP) transceivers to support different modes and cabling distances. Uses either optical or copper SFPs. The optical transceivers are 1000Base-ZX compliant. The copper transceivers are 1000Base-T compliant. Single-strand SFPs can be used. These SFPs work in pairs and require a matching SFP at the opposite end of the Ethernet connection. For example, an SFP rated at TX 1310, RX 1550 must be paired with an SFP rated TX 1550, RX 1310 with the same maximum operating range. See the following corresponding table (Single-strand SFPs Pairing) for more information.
Type	EFA ASIC
Capability	Ethernet (IEEE 802.3z) 1000Base-ZX
Software features	See Ethernet Modules for information about the layer 2 and layer 3 protocols and applications that this module combination supports.
Model compatibility	ERX7xx models ERX14xx models ERX310 router
SRP module compatibility	SRP-5G+ SRP-10G SRP-40G SRP-40G PLUS SRP-SE10G
Module redundancy support	Not applicable
Cables and connectors (copper SFP)	Maximum range is 100 meters on CAT5 cable.
Cables and connectors (ZX)	LC full duplex Tx power: min: –2 dBm max: 3 dBm Center wavelength: 1550 nm Rx input power: min: –22 dBm max: –3 dBm Rated for 70 km (43.4 miles) over 10-micron core cable See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
LEDs	See Module LEDs.
Alarms, errors, and events	See Monitoring Ethernet Interfaces in JunosE Physical Layer Configuration Guide, Chapter 5, Configuring Ethernet Interfaces.

Table 4: Single-strand SFPs Pairing

Fiber Type	Nominal Wavelength (nm)	Maximum Operating Range (kilometers)
9 microns	TX 1310, RX 1550 Pairs with TX 1550 / RX 1310	10 (6.2 miles), matching SFP must have the same operating range
9 microns	TX 1550 / RX 1310 Pairs with TX 1310, RX 1550	10 (6.2 miles), matching SFP must have the same operating range
9 microns	TX 1310, RX 1490 Pairs with TX 1490 / RX 1310	10 (6.2 miles), matching SFP must have the same operating range
9 microns	TX 1490 / RX 1310 Pairs with TX 1310, RX 1490	10 (6.2 miles), matching SFP must have the same operating range
9 microns	TX 1310, RX 1550 Pairs with TX 1550 / RX 1310	40 (24.85 miles), matching SFP must have the same operating range
9 microns	TX 1550, RX 1310 Pairs with TX 1310 / RX 1550	40 (24.85 miles), matching SFP must have the same operating range