FE-8 SFP Module Combination (8 Ports) (256-MB Memory)

Line module label GE/FE
I/O module label FE-8 SFP I/O
Number of I/O ports
8
Software release
First supported: 6.0.0
Final supported: Not applicable
Description
130 W
Fast Ethernet
The FE-8 SFP I/O module uses a range of small form-factor pluggable (SFP) transceivers to support different modes and cable lengths.
Type
EFA ASIC
Capability
IEEE 802.3 standards compliance
100Base-FX
Software features
See Ethernet Modules for information about the layer 2 and layer 3 protocols and applications that this module combination supports.
Model compatibility
ERX7xx models
ERX14xx models
ERX310 router
SRP module compatibility
SRP-5G+
SRP-10G
SRP-40G
SRP-40G PLUS
SRP-SE10G
Module redundancy support
Not applicable
Cables and connectors (single-mode fiber)
LC full duplex
Tx power:
min: –15 dBm
max: –8 dBm
Center wavelength: 1300 nm
Rx input power:
min: –28 dBm
max: –14 dBm
Rated for 10 km (6.2 miles) over 9-micron core cable
See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
Cables and connectors (multimode fiber)
LC full duplex
Tx power: –20 dBm minimum and –14 dBm maximum
Center wavelength: 850 nm
Rx input power: –31 dBm minimum and –14 dBm maximum
Rated for 2 km (1.2 miles) over 62.5/125-micron core cable
See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
LEDs
See Module LEDs.
Alarms, errors, and events
See Monitoring Ethernet Interfaces in JunosE Physical Layer Configuration Guide, Chapter 5, Configuring Ethernet Interfaces.

Line module label	GE/FE
I/O module label	FE-8 SFP I/O
Number of I/O ports	8
Software release	First supported: 6.0.0 Final supported: Not applicable
Description	130 W Fast Ethernet The FE-8 SFP I/O module uses a range of small form-factor pluggable (SFP) transceivers to support different modes and cable lengths.
Type	EFA ASIC
Capability	IEEE 802.3 standards compliance 100Base-FX
Software features	See Ethernet Modules for information about the layer 2 and layer 3 protocols and applications that this module combination supports.
Model compatibility	ERX7xx models ERX14xx models ERX310 router
SRP module compatibility	SRP-5G+ SRP-10G SRP-40G SRP-40G PLUS SRP-SE10G
Module redundancy support	Not applicable
Cables and connectors (single-mode fiber)	LC full duplex Tx power: min: –15 dBm max: –8 dBm Center wavelength: 1300 nm Rx input power: min: –28 dBm max: –14 dBm Rated for 10 km (6.2 miles) over 9-micron core cable See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
Cables and connectors (multimode fiber)	LC full duplex Tx power: –20 dBm minimum and –14 dBm maximum Center wavelength: 850 nm Rx input power: –31 dBm minimum and –14 dBm maximum Rated for 2 km (1.2 miles) over 62.5/125-micron core cable See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
LEDs	See Module LEDs.
Alarms, errors, and events	See Monitoring Ethernet Interfaces in JunosE Physical Layer Configuration Guide, Chapter 5, Configuring Ethernet Interfaces.