Index

Symbols

802.3ad switch    1

A

access lists, BGP    1

assigning weights to neighbors    1

distributing neighbor information    1

access-list command    1, 2

address families    1

L2VPN    1, 2, 3, 4, 5, 6

multicast IPv4    1, 2, 3

multicast IPv6    1, 2, 3

route-target    1, 2

unicast IPv4    1, 2, 3

unicast IPv6    1, 2, 3

VPLS    1, 2, 3, 4, 5

VPN-IPv4    1, 2, 3

VPN-IPv6    1, 2, 3

VPWS    1, 2, 3, 4, 5

address-family command    1, 2, 3, 4, 5

for L2VPN address family    1

for VPWS address family    1

administrative distance    

BGP, setting    1

admission control, MPLS    1

advertise-map keyword (aggregate-address)    1

aggregate-address command    1

aggregation, LDP FEC    1

aggregator, BGP    1

append-after command    1

APS/MSP (Automatic Protect Switching/Multiplex Section Protection)    1

areas, OSPF    

defining    1

AS (autonomous system)    1

advertising networks in    1

confederation    1

IGP (interior gateway protocol)    1

managing a large-scale    1

AS path filtering    1

AS-path, BGP    

access lists, modifying    1

attribute    1

filtering    1

as-set keyword (aggregate-address)    1

ATM (Asynchronous Transfer Mode)    

AAL0 encapsulation    1

AAL5 encapsulation    1

Martini encapsulation    1

over MPLS    1

passthrough for ATM over MPLS    1, 2

VCC cell relay encapsulation    

configuring    1

overview    1

ATM cells    

concatenation of multiple    

for transportation over a single pseudowire    1

transported over a single pseudowire, subset of    

discarded on he remote PE device    1

atm commands    

atm cell-packing    1

atm mcpt-timers    1

atm pvc    1, 2

ATM line modules    

and transport of a subset of ATM VCs    

over a single pseudowire    1

hardware limitations    

and support of multiple VCs over a pseudowire    1

ATM Martini cell packing timer    

expired time interval    

and forwarding of MPLs packets    1

for concatenation of multiple cells    

and transmission over a single pseudowire    1

ATM n-to-one VCC cell transport (0x0009) pseudowire (PW) type    

used by LDP    

for subset of ATM VCs over a pseudowire transport    1

ATM ports    

changed to LOS state    

and multiple VCs over a single pseudowire    1

configuring cell concatenation parameters    

requirements    1

connectivity between two of them    

emulated using multiple VCs transport over a pseudowire    1

not changed to LOS state    

during a failure on the pseudowire    1

ATM virtual circuits    1

adding MPLS Martini circuit configuration    

for multiple VCs transport over a pseudowire    1

and emulation of connectivity    

between ATM ports    1

based on RFC 4816    

exception with subset of ATM cells transport    1

concatenation of multiple cells    

requirements for configuring    1

configuring a subset of    

using the mpls-relay atm vpi-range command    1

configuring VPI/VCI ranges    1

hardware limitations of ATM LMs    

and transport of multiple VCs over a pseudowire    1

in Martini topologies    

transportation over a single pseudowire    1

received on an ATM port    

opening VCs on the SAR scheduler    1

transmission of a subset of ATM cells over a pseudowire    

deployment scenario    1

transmission of multiple cells over a pseudowire    

high availability and    1

limit on total number of    1

performance impact    1

unified ISSU and    1

verifying cell concatenation    1

verifying VCI/VPI ranges    1

transmission of multiple VCs over a single pseudowire    

interoperation with cell relay on a subinterface    1

transport of multiple cells over a pseudowire    

and ATM n-to-one VCC cell transport (0x0009) pseudowire (PW) type    1

transportation of cells from multiple circuits    

over a single pseudowire    1

transportation of multiple ATM cells    

concatetation    1

atomic-aggregate, BGP    1

attribute-map keyword (aggregate-address)    1

authentication    

BGP    1

MPLS    

LDP MD5    1

RSVP-TE    1

auto-summary command    1

autoconfiguration, LDP    1

autonomous system.     See AS    

B

backdoor link, OSPF    1

backdoor route, BGP    1

backup tunnels, MPLS RSVP-TE    1

bandwidth command    1

baseline commands    

baseline bgp statistics    1

baseline bridge    1

baseline bridge interface    1

baseline bridge interface vpls    1

baseline ip bgp    1

baseline mpls interface    1, 2

baseline mpls label    1

baseline mpls next-hop    1, 2

BFD (Bidirectional Forwarding Detection)    

BGP peer reachability detection    1

RSVP-TE, configuring for    1

BGP (Border Gateway Protocol)    1

access lists    1

administrative distance    1

administrative shutdown    1, 2

advertising networks in ASs    1

advertising routes conditionally    1

advertising two best routes    1

aggregator path attribute    1

AS-path attribute    1

atomic-aggregate path attribute    1

authentication on TCP connection    1

automatic fallover    1

automatic summarization of routes    1

backdoor routes    1

BFD    1

and graceful restart    1

packet rates    1

session events    1

BGP/MPLS VPNs    1

configuring sessions for    1

capabilities    1

capability negotiation    1

changing BGP policies    1

checking AS number from external peer    1

Cisco-proprietary route refresh capability    1

community lists    1

community path attribute    1

conditional advertising    1

configuration inheritance    1

configuring    1

default routes    1

peer groups    1

route reflectors    1

routing policy    1

cooperative route filtering capability    1

default next-hop address    1

deleting BGP sessions    1, 2

deprecated dynamic capability negotiation capability    1, 2

dynamic capability negotiation capability    1, 2

dynamic peering    1

EBGP    1

ECMP    1, 2

enable BGP routing    1

enable routing    1

enable routing for BGP/MPLS VPNs    1, 2

End-of-RIB marker    1

extended community path attribute    1

features    1

four-octet AS numbers capability    1

graceful restart    1, 2

and BFD    1

IBGP    1

inheritance of configuration values    1

keepalive message    1

keepalives and BFD    1

L2VPNs, configuring    1

lenient behavior for error recovery    1

link-local next hops    1

local-pref path attribute    1

messages    1

monitoring    1

multiexit discriminator path attribute    1

multiprotocol extensions    1

multiprotocol extensions capability    1

neighbors and peer groups, shutting down    1

next-hop path attribute    1

notification message    1

open message    1

originator-ID path attribute    1

passive peers    1

path    1

path attribute    1

path selection process    1

peer (neighbor)    1

peer groups    1

peer type, set the    1

platform considerations    1

policies, soft reconfiguration of    1

promiscuous peers    1

reapplying BGP policies    1

redistributing BGP routes    1

reduce the number of meshed peers    1

remove BGP dynamic peers    1

resetting BGP sessions    1, 2

route refresh capability    1

route-refresh message    1

routes, using for other protocols    1

running out of memory    1

sessions    1

assigning interface to    1

automatic restoration of    1

deleting BGP    1, 2

hard clearing    1

resetting and clearing    1

route    1

soft clearing    1

shutting BGP down when low on memory    1

speaker    1

synchronization    1

troubleshooting    1

update message    1

VPLS, configuring    1

bgp commands    1,  See also show bgp ipv6 commands    

bgp advertise-best-external-to-internal    1

bgp advertise-inactive    1

bgp always-compare-med    1, 2

bgp bestpath med confed    1

bgp client-to-client reflection    1

bgp cluster-id    1

bgp confederation identifier    1

bgp confederation peers    1, 2

bgp dampening    1

bgp default ipv4-unicast    1

bgp default local-preference    1, 2

bgp default route-target filter    1

bgp enforce-first-as    1

bgp fast-external-fallover    1

bgp log-neighbor-changes    1

bgp redistribute-internal    1

bgp shutdown    1

bgp wait-on-end-of-rib    1

bgp graceful-restart commands    

bgp graceful-restart    1

bgp graceful-restart restart-time    1

bgp graceful-restart stalepaths-time    1

bgp graceful-restartpath-selection-defer-time-limit    1

BGP-based VPLS     See VPLS (virtual private LAN service)    

BGP/MPLS VPNs    

address family, disabling default    1

advertisement rules with route-target filtering    1

applications    1

AS number    

advertising prefixes with duplicate    1

using for all CE sites    1

BGP advertising rules for routes    1

BGP sessions, configuring    1

customer edge device    1

data transport    1

default route to shared interface    1

ECMP    1, 2

ECMP indirect next hops    1

export list    1

export map, setting the    1

extended community, route target    1

fallback global    1

fallback global example    1, 2

fast reconvergence    1

filtering routes    1

full mesh VPN    1

global export map    

example    1

IPv6 VPN routes    1

setting the    1

global import map to import specific routes    1

hub-and-spoke VPN    1

IGP routes, advertising    1

IGPs, configuring on VRF    1

import list    1

import map, setting the    1

inter-AS (interprovider) services    

IPv4    1

IPv6    1

interaction with OSPF    1

intra-AS services    

IPv4    1

IPv6    1

IPv6 over IPv4    1, 2

L2VPNs and    1

L2VPNs, configuring    1

label-switching routers    1, 2

labeled and unlabeled routes, sending    1

labeled unicast routes, processing    1

labeled VPN routes, processing    1

maximum number of external best paths for route target filtering    1

maximum routes    1

MP-Reach-NLRI attribute    1

MP-Unreach-NLRI attribute    1

MPLS labels    1

next hops, check reachability    1

OSPF backdoor link    1, 2

OSPF configuration    1

OSPF domain identifier attribute    1

OSPF route type attribute    1

OSPF routes    

distributing between PEs    1

distributing from CE to PE    1

distributing from PE to CE    1

OSPF routing information, preserving    1

OSPF routing loops, preventing    1

overriding AS number for CE sites    1

parent VR, peering with VRF    1

path failure, ECMP    1

peering between VRF and parent VR    1

platform considerations    1

provider core routers    1

provider edge routers    1

providing Internet access    1

pruning failed ECMP paths    1

reachability of next hops    1

route distinguisher    1

route processing by BGP    1

route reachability information    1

route target    

configuring VPN topologies    1

defining    1

route-target extended community    1

route-target filtering    1

route-target filtering, disabling    1

route-target membership attribute    1

routing loops, preventing    1

RT-MEM-NLRI attribute    1

RT-MEM-NLRI routing updates    1

secondary routing table lookup    1

setting maximum route limits    1

sham link, OSPF    1

site-of-origin to prevent routing loops    1

static routes to shared IP interface    1

static routes, advertising    1

traffic flow from Internet to VPN    1

traffic flow from VPN to Internet    1

transporting packets    1

unlabeled unicast routes, processing    1

update message enhancement    1

VPLS    1

VPLS, configuring    1

VPN services, configuring    1

VPN topologies, configuring with route targets    1

full-mesh    1

hub-and-spoke    1

overlapping    1

VPN-IPv4 address    1

VPNs between ASs    

IPv4    1

IPv6    1

VPNs within an AS    

IPv4    1

IPv6    1

VRF    1

Bidirectional Forwarding Detection.     See BFD    

Border Gateway Protocol.     See BGP    

bridge commands    

bridge acquire    1

bridge address    1

bridge aging-time    1

bridge learn    1

bridge snmp-trap link-status    1

bridge vpls rd    1

bridge vpls route-target    1

bridge vpls site-name site-id    1

bridge vpls site-range    1

bridge vpls transport-virtual-router    1, 2

bridge-group    1

bridging, transparent    

and VPLS    1

bundle messages, MPLS    1

bypass tunnels, MPLS RSVP-TE    1

C

candidate ports    1

capabilities, BGP    

Cisco-proprietary route refresh    1, 2

cooperative route filtering    1, 2

deprecated dynamic capability negotiation    1

dynamic capability negotiation    1, 2

four-octet AS numbers    1, 2

graceful restart    1, 2

multiprotocol extensions    1

route refresh    1, 2

capability codes    1

capability negotiation, BGP    1

carrier-of-carriers IPv4 VPNs    1

enabling    1

carrier-of-carriers IPv6 VPNs    1

CE (customer edge device)    1, 2

CE-side load balancing    1

cell aggregation     See concatenation    

cell relay encapsulation    

for a single VC and multiple VCs    

pseudowire type used    1

cell relay encapsulation, VCC.     See VCC cell relay encapsulation    

check-vpn-next-hops command    1

CIDR (Classless Interdomain Routing)    

configuring addresses    1

cleanout-timeout-factor command    1, 2

clear    

BGP hard    1

BGP soft    1

clear bgp ipv6 commands    

clear bgp ipv6    1

clear bgp ipv6 dampening    1

clear bgp ipv6 dynamic-peers    1

clear bgp ipv6 redistribution    1

clear BGP sessions    1

clear bridge commands    

clear bridge    1

clear bridge address    1

clear bridge interface    1

clear bridge interface vpls    1

clear commands    

clear access-list    1

clear ip bgp wait-end-of-rib    1

clear ip routes    1

clear rsvp authentication    1

clear ip bgp commands    

clear ip bgp    1, 2, 3

clear ip bgp dampening    1, 2, 3, 4

clear ip bgp dynamic-peers    1

clear ip bgp redistribution    1

clear ip bgp soft prefix-filter    1

clear ip bgp wait-end-of-rib    1, 2

clear ip commands    

clear ip tunnel-routes    1, 2

clear mpls commands    

clear mpls dynamic-interfaces on-major-interfaces    1

clear mpls ldp    1

codes, BGP capability    1

communities, BGP    

attributes    1

extended    1

community lists, BGP    1

concatenation    

of multiple ATM cells    

for transmission over a single MPLS packet    1

maximum number    1

not using LDP signalling method    1

using a timer specified interval    1

confederations    1

configuration example    

for multiple ATM virtual circuits transport    

over a single pseudowire    1

connectivity verification    

at egress nodes    

in point-to-multipoint MPLS LSPs    1

using ping feature for    

point-to-multipoint LDP LSPs, unsupported    1

connectivity, verify and troubleshoot MPLS    1

conventions    

notice icons    1

text and syntax    1

cooperative route filtering capability    1

core non-VPN RIB    1, 2

core VPN RIB    1, 2

cross-connects, local    1, 2, 3, 4

customer edge (CE) device    1

customer support    1

contacting JTAC    1

D

data path failure    

detecting RSVP-TE    1

data plane failures    

detecting in point-to-multipoint LSPs    

at egress nodes    1

supported sub-TLVs in Target FEC Stack TLV for    1

supported TLVs for    1

using Echo Jitter TLV    1

using P2MP Responder Identifier TLV    1

using RSVP P2MP IPv4 Session sub-TLV    1

deaggregation, LDP FEC    1

debug commands    

debug ip bgp    1

default routes    

BGP routing    1

default-fields commands    

default-fields peer    1

default-fields route    1

default-information originate command    1, 2

delay period    

for sending MPLS echo responses    

to echo requests for egress nodes in point-to-multipoint LSPs    1

in Echo Jitter TLV    

predefined value    1

supported value, maximum    1

specifying in Echo Jitter TLV    1

detecting RIP data path failure    1

disable-dynamic-redistribute command    1

discovery, LDP    

basic    1

extended    1

distance bgp command    1, 2

documentation set    

comments on    1

domain, VPLS    1

domain-id command    1

domain-tag command    1

dont-install-routes command    1

DS-BGP routers    1

dual-stack BGP routers    1

dynamic capability negotiation    1

dynamic interfaces, created by MPLS    1

dynamic peering, BGP    1

dynamic peers, remove BGP    1

dynamic route redistribution, disabling in BGP    1

dynamically learned defaults    1

E

E-LSP    1, 2

EBGP (external Border Gateway Protocol)    

updates in indirectly connected networks    1

Echo Jitter TLV    

contained in echo responses    

no action taken    1

detecting data plane failures    

at egress nodes in point-to-multipoint MPLS LSPs    1

functions of    

beneficial when the entire LSP tree is pinged    1

preventing flooding of responses    1

segregating echo responses from multiple egress nodes    1

invalid in echo responses    1

not contained in echo requests    

no delay in echo responses    1

preconfigured value, default    1

supported delay period    

exceeded, alternative action taken    1

maximum value    1

of up to 30 seconds    1

to process MPLS LSP ping messages    

delaying the sending of echo responses    1

type value defined in    

IETF draft, Detecting Data Plane Failures in Point-to-Multipoint Multiprotocol Label Switching (MPLS) - Extensions to LSP Ping    1

type value, 12    1

used in MPLS echo request packets    

delay the sending of echo responses    1

uses    

preventing echo responses from being discarded    1

preventing flooding of responses at ingress nodes    1

echo reply packets, MPLS    1

echo request packets, MPLS    1

ECMP (equal-cost multipath)    

BGP    1

BGP/MPLS VPNs    1, 2

MPLS indirect next hops    1

path failures in BGP/MPLS VPNs    1

pruning failed paths    1

Egress Address P2MP Responder Identifier sub-TLVs    

specifying    

IPv4 address of egress nodes    1

IPv6 address of egress nodes    1

used to denote    

a specific egress node from which path must be traced    1

enable a protocol    

BGP routing    1, 2, 3

enable protocols    

BGP routing    1

encapsulations    

ATM AAL0    1

ATM AAL05    1

equal-cost multipath support on MPLS    1

Ethernet aggregation and Martini layer 2 transport    1

Ethernet raw mode encapsulation    

overview    1

Ethernet/VLAN over MPLS (Multiprotocol Label Switching)    

configuration steps    1

overview    1

exit-address-family command    1, 2, 3, 4, 5, 6

explicit null label, advertise the    1

export map    

setting the BGP/MPLS VPN    1

use    1

export map command    1

extended communities    

BGP    1, 2

route target    1

external administrative distance, BGP    1

external BGP    

EBGP    1

external-paths command    1

F

F4 OAM cells    

not carried on the same pseudowire as data cells    

unopened OAM circuits    1

F5 Operations Administration and Maintenance (OAM) cells    

and transmission of data cells over the same pseudowire    

same VCI/VPI values as the data cells    1

fast reroute extension, MPLS    1

FEC aggregation, LDP    1

FEC deaggregation, LDP    1

filter BGP/MPLS VPN routes    1

filter lists, BGP    1

four-octet AS number capability    1

Frame Relay    

over MPLS    1

configuration example    1

full-mesh VPNs, configure with route targets    1

G

global export map    

and IPv6    1

setting the BGP/MPLS VPN    1

use    1

global export map command    1

global import map    

use    1

global import map command    1

global import map to import specific routes    1

graceful restart    

configuring RSVP-TE    1

LDP    1

RSVP-TE    1

graceful restart capability    1

H

hard clear of BGP sessions    1

hardware limitations    

with ATM line modules    

and support of multiple VCs over a single pseudowire    1

HDLC (High-Speed Data Link Control) layer 2 services over MPLS    

configuring    1

overview    1

hello commands    

hello hold-time    1, 2

hello interval    1, 2

hello messages    

LDP link    1

LDP targeted    1

RSVP-TE    1

hub-and-spoke topologies, configure with route targets    1

I

IBGP ( internal Border Gateway Protocol)    

defined    1

IBGP (internal Border Gateway Protocol)    

route reflection and    1

single-hop peers    1

IETF draft, Detecting Data Plane Failures in Point-to-Multipoint Multiprotocol Label Switching (MPLS) - Extensions to LSP Ping    

definition of type value for    

Echo Jitter TLV    1

P2MP Responder Identifier TLV    1

IGP (interior gateway protocol)    1

IGP-LDP synchronization    1

import map    

setting the BGP/MPLS VPN    1

use    1

import map command    1

index command    1

inheritance of BGP configuration values    1

instances, L2VPN    

configure    1

overview    1

instances, VPLS    

configuring    1, 2, 3

overview    1

Integrated Local Management Interface (ILMI) cells    

and transmission along with data cells on the same pseudowire    

same VCI/VPI values as the data cells    1

inter-AS (interprovider) services    

IPv4    1

IPv6    1

interface commands    

interface loopback    1, 2

interface tunnel command    

MPLS    1, 2, 3

interfaces    

assigning to BGP sessions    1

interior gateway protocol     See IGP    

internal administrative distance, BGP    1

internal BGP.     See IBGP    

internet community, BGP    1

interoperability with Junos OS    

of MPLS LSP ping in JunosE Software    

type value interpretation in P2MP Responder Identifier TLV    1

intra-AS services    

IPv4    1

IPv6    1

IP addresses    

matching route’s destination    1

ip commands    

ip as-path access-list    1, 2

ip bgp-community new-format    1

ip bgp-confed-as-set new-format    1

ip community-list    1

ip explicit-path command.     See mpls commands, mpls explicit-path    

ip extcommunity-list    1

ip prefix-list    1

ip prefix-tree    1

ip route    1, 2

ip route vrf    1

ip route-type    1

ip router-id    1, 2

ip mpls commands    

ip mpls forwarding-mode label-switched    1

ip route parent-router command    1

ip rsvp commands     See mpls rsvp commands for all other ip rsvp commands    

ip rsvp bandwidth.    

mpls bandwidth     See mpls commands; mpls bandwidth    

ip vrf commands    

ip vrf    1

ip vrf forwarding    1, 2, 3

IPv4 Egress Address P2MP Responder Identifier    

in echo requests containing    

RSVP P2MP Session sub-TLVs    1

inclusion in echo requests    

does not specify address of branch and transit nodes    1

specifies address of egress nodes    1

using in echo requests    

that contain Multicast LDP FEC Stack sub-TLV    1

IPv4 Node Address P2MP Responder Identifier    

in echo requests containing    

Multicast LDP FEC Stack sub-TLVs    1

RSVP P2MP Session sub-TLVs    1

inclusion in echo requests    

specifies address of physical interface or router ID    1

using in echo requests    

that contain Multicast LDP FEC Stack sub-TLV    1

IPv6 Egress Address P2MP Responder Identifier    

in echo requests containing    

Multicast LDP FEC Stack sub-TLVs    1, 2

RSVP P2MP Session sub-TLVs    1

inclusion in echo requests    

does not specify address of branch and transit nodes    1

specifies address of egress nodes    1

using in echo requests    

that contain RSVP P2MP Session sub-TLV    1

IPv6 islands    

connecting over IPv4 BGP/MPLS VPNs    1

IPv6 Node Address P2MP Responder Identifier    

in echo requests containing    

Multicast LDP FEC Stack sub-TLVs    1

RSVP P2MP Session sub-TLVs    1

inclusion in echo requests    

specifies address of physical interface or router ID    1

using in echo requests    

that contain RSVP P2MP Session sub-TLV    1

IPv6 VPNs    

carrier-of-carriers    1

global export maps    1

inter-AS services    1

intra-AS services    1

K

keepalive messages    

BGP    1

L

L-LSP    1, 2

L2VPN address family    1, 2, 3, 4, 5, 6

l2vpn commands    

l2vpn control-word    1

l2vpn encapsulation-type    1

l2vpn local-site-id remote-site-id    1

l2vpn rd    1

l2vpn route-target    1

l2vpn sequencing    1

l2vpn site-name site-id    1

l2vpn site-range    1

L2VPNs (Layer 2 Virtual Private Networks)    

address families, configure    1

clear    

BGP route flap dampening    1

configuration tasks    1

configure    

address families    1

L2VPN address family    1, 2

VPWS address family    1, 2, 3

labels, switching of MPLS    1

layer 2 services over MPLS    

802.3ad switch    1

AAL0 encapsulation    1

AAL5 encapsulation    1

ATM passthrough    1, 2

AAL5 encapsulation    1

control word support    1

limitations    1

Martini encapsulation    1

OAM cells    1

QoS classification    1

candidate ports    1

CE-side load balancing    1

CE-side MPLS L2VPNs over LAG    

overview    1

configuration example    1

configuring    1

configuring shim interfaces    1, 2, 3

control word    1

control word support for ATM passthrough    1

Ethernet aggregation    1

Ethernet raw mode encapsulation    

overview    1

Ethernet/VLAN connections    1

Frame Relay example    1

HDLC    

configuring    1

overview    1

how they work    1

interfaces supported    1

load-balancing    

adding member interface to group    1, 2

group    1

topology    1, 2

local cross-connects    1, 2, 3, 4

monitoring    1

MPLS L2VPN over LAG, configuration example    1

MPLS L2VPN over VLAN over LAG, configuration example    1

multiservice traffic, interface stacking for    1

overview    1

platform considerations    1

ports, candidate    1

references for    1

S-VLAN subinterface with an untagged C-VLAN ID    

overview    1

VCC cell relay encapsulation, ATM    

configuring    1

overview    1

LDP (Label Discovery Protocol)    

ATM n-to-one VCC cell transport (0x0009) pseudowire (PW) type    

used for multiple VCs transmission    1

bringing up on the pseudowire    

for mismatching VCI/VPI range configurations at the two pseudowire ends    1

LDP (Label Distribution Protocol)    1

authentication, MD5    1

autoconfiguration    1

basic discovery    1

configuring for VPLS signaling    1

discovery mechanisms    1

extended discovery    1

FEC aggregation    1

FEC deaggregation    1

graceful restart    1

graceful restart configuration tasks    1

LDP-IGP synchronization    1

link hellos and discovery    1

messages    1

overview    1

peer discovery    1

targeted hellos and discovery    1

LDP-based VPLS.     See VPLS (virtual private LAN service)    

lenient behavior, BGP    1

link hellos and LDP basic discovery    1

list command    1

liveness detection    

RSVP-TE and BFD    1

load balancing    

candidate ports    1

group    1

local administrative distance, BGP    1

local cross-connects    1, 2, 3, 4

local-pref attribute, BGP    1

LSP ping functionality    

in point-to-multipoint LSPs with egress nodes    

testing connectivity    1

in routers other than E Series routers    

testing connectivity of point-to-multipoint MPLS LSPs    1

verifying connectivity of point-to-multipoint LSPs    

with echo reply packets    1

with echo request packets    1

LSP preemption    1

LSRs (label-switched routers)    

testing connectivity in point-to-multipoint LSPs    

for branch nodes    1

for egress nodes    1

for ingress nodes    1

for transit nodes    1

M

manuals    

comments on    1

maps    

export    1

global export    1, 2

global import    1

import    1

Martini ATM virtual circuits    

over a single pseudowire    1,  See also ATM virtual circuits    

deployment scenario    1

overview    1

transmission of subset of    

configuring cell concatenation for    1

transportation of cells from multiple circuits    

over a single pseudowire    1

Martini circuits    

Ethernet packet distribution    

configuration example    1

Ethernet raw mode encapsulation    

configuration example    1

over LAG    

configuration example    1

over VLAN over LAG    

configuration example    1

with two pseudowires    

between PE-facing routers    1

Martini circuits over LAG    

overview    1

Martini layer 2 transport    

Ethernet raw mode encapsulation, overview    1

S-VLAN Subinterface with an Untagged C-VLAN ID, overview    1

match commands    

match as-path    1

match community    1

match distance    1

match extcommunity    1

match ip address    1

match ip next-hop    1

match level    1

match metric    1

match metric-type    1

match mpls-label    1

match route-type    1

match tag    1

maximum route limit, BGP/MPLS VPN    1

maximum route warning threshold, BGP/MPLS VPN    1

maximum routes command    1

maximum-paths command    1

member interface command    1

meshed peers, reduce BGP    1

messages, BGP    1

MPLS (Multiprotocol Label Switching)    1,  See also layer 2 services over MPLS; LDP; RSVP-TE    

accounting resources    1

adjacency messages, LDP    1

administrative weight    1

admission control    1

announcing endpoints    1

attribute flags    1

authentication    

RSVP-TE MD5    1

backup, LSP    1

bandwidth    1

baselining statistics    1

BGP/MPLS VPNs    1

bundle messages    1

bypass tunnels    1

class of service bits    1

configuration    

basic    1

interface    1

interface profile    1

levels    1

tunnel    1

tunnel profile    1

configuring Ethernet/S-VLAN over    1, 2

connectivity, verify and troubleshoot    1

constraint-based routing    1

conventional IP routing    1

data mapping    1, 2

differentiated services, tunnel models for    1

discovery of directly connected peers    1

discovery of nondirectly connected peers    1

discovery, LDP    1

downstream node    1

downstream-on-demand    1

downstream-unsolicited    1

dynamic interfaces, creating    1

echo reply packets    1

echo request packets    1

ECMP    

path tracing    1

support    1

egress forwarding actions    1

EXP bits    1

experimental bits    1

explicit null label    1

explicit path    

configured    1

configuring dynamic    1

defining configured    1

dynamic    1

explicit routing    1

fast reroute extensions    1

fast reroute on SONET/SDX interfaces    1

features, supported    1

FEC    1

flooding frequency    1

flooding thresholds    1

forwarding equivalency class    1, 2

glossary    1

hard-state protocol    1

implicit null label    1

interface label space    1

L2VPNs, configure VPWS    1

label distribution protocols    

BGP    1

LDP    1

RSVP-TE    1

label-switching router    1

labels    1, 2

explict null    1

implicit null    1

spaces    1

stacking    1

swapping    1

layer 2 services over    1

LDP.     See LDP (Label Distribution Protocol)    

local cross-connects    1, 2, 3

loose hop    1

LSP (label-switched path)    

backup    1

configure for VPWS L2VPNs    1

configuring for VPLS    1

explicit path    1

LSR (label-switching router)    1

major interface statistics    1

message ack object    1

message ID object    1

monitoring    1

node    1

objects, RSVP-TE    1

ordered control    1

OSPF, configuring    1

overview    1, 2

path options for backup    1

penultimate hop popping    1

platform considerations    1

platform label space    1

preemption    1

reachability, verify and troubleshoot    1

refresh messages    1

resource requirements    1

resources, configuring    1

route pinning    1

RSVP-TE.     See RSVP-TE (Resource Reservation Protocol with traffic engineering extensions)    

S bit    1

shim header    1

shim interfaces, configuring    1, 2, 3

soft-state protocol    1, 2

srefresh messages    1

stacking labels    1

statistics    1

statistics, major interface    1

strict hop    1

summary refresh messages    1

swapping labels    1

switching labels    1

switching vs routing    1

TLVs for ping    1

topology-driven LSPs    1

trace network connections    1

traffic engineering    1

for backup    1

tracking resources    1

TTL bits    1

TTL processing    1

TTL rules for expiration    1

tunnel endpoint    

announcement    1

definition    1

tunnel metric for backup    1

tunnel models for differentiated services    1

ultimate hop popping    1

upstream node    1

VPI/VCI and labels    1

VPLS, configuring LSPs for    1

VPNs    

BGP/MPLS    1

weight    1

mpls commands    1,  See also show mpls commands    

mpls    1, 2, 3, 4

mpls atm vci range    1

mpls atm vpi range    1

mpls backup-path    1

mpls bandwidth    1

mpls classifier-list    1

mpls create-dynamic-interfaces    1, 2

mpls diff-serv phb-id traffic-class    1

mpls disable    1

mpls explicit-path    1

mpls ip propagate-ttl    1

mpls l2-transport load-balancing-group    1

mpls lsp no-route retries    1

mpls lsp no-route retry-time    1

mpls lsp retries    1

mpls lsp retry-time    1

mpls policy    1

mpls policy-list    1

mpls reoptimize    1

mpls reoptimize timers frequency    1

mpls set-exp-bits    1, 2

mpls statistics label    1

mpls statistics next-hop    1, 2

mpls topology-driven-lsp    1

mpls traffic-class    1

mpls traffic-eng administrative-weight    1

mpls traffic-eng attribute-flags    1

mpls traffic-eng flooding threshold    1

mpls traffic-eng link-management timers periodic-flooding    1

mpls tunnel-model    1

mpls tunnels profile    1

mpls-relay    1, 2, 3, 4, 5, 6, 7

mpls-relay atm cell-packing mcpt-timers    1

mpls-relay atm vpi-range    1

MPLS echo reply packets    

testing network connectivity    

for egress nodes in point-to-multipoint LSPs    1

MPLS echo request packets    

testing network connectivity    

for egress nodes in point-to-multipoint LSPs    1

MPLS echo requests    

excluding P2MP Responder Identifier TLV from    

responses sent from all nodes in the path to ingress    1

including P2MP Responder Identifier TLV in    

tracing the path from ingress node    1

inclusion of sub-TLVs of P2MP Responder Identifier TLV in    

IPv4 Egress Address P2MP Responder Identifier    1

IPv4 Node Address P2MP Responder Identifier    1

IPv6 Egress Address P2MP Responder Identifier    1

IPv6 Node Address P2MP Responder Identifier    1

sent to nodes other than egress nodes in MPLS LSPs    

echo response to originator    1

specifying    

a delay for echo responses    1

without P2MP Responder Identifier TLV contained    

echo response to originator    1

MPLS echo responses    

containing Echo Jitter TLV    

no action performed in connectivity verification    1

controlled by Response Type filed in requests    1

delaying sending of    

preventing discarding, owing to rate limiting    1

preventing flooding at originator    1

dependence on position of node    

in point-to-multipoint LSPs    1

sent from a particular egress node    

specified in the P2MP Responder Identifier TLV    1

sent from all nodes in the path to ingress    

with P2MP Responder Identifier TLV excluded in requests    1

MPLS L2VPN over LAG    

configuration example    1

MPLS L2VPN over VLAN over LAG    

configuration example    1

MPLS L2VPNs    

over LAG, configuration example    1

over VLAN over LAG, configuration example    1

MPLS L2VPNs over LAG    

on CE-side, overview    1

mpls ldp commands    

mpls ldp    1, 2, 3, 4

mpls ldp advertise-labels    1

mpls ldp autoconfig    1, 2

mpls ldp deaggregate    1

mpls ldp disable    1

mpls ldp egress-label    1

mpls ldp graceful-restart    1

mpls ldp graceful-restart reconnect-time    1

mpls ldp graceful-restart recovery-time    1

mpls ldp graceful-restart timers max-recovery    1

mpls ldp graceful-restart timers neighbor-liveness    1

mpls ldp igp sync holddown    1

mpls ldp independent-control    1

mpls ldp ip-forwarding    1

mpls ldp link-hello disable    1

mpls ldp neighbor password    1

mpls ldp profile    1, 2

mpls ldp redistribute    1

mpls ldp session holdtime    1

mpls ldp session keepalive-interval    1

mpls ldp session retries    1

mpls ldp session retry-time    1

mpls ldp strict-security    1

mpls ldp sync    1

mpls ldp targeted-hello holdtime    1

mpls ldp targeted-hello interval    1

mpls ldp targeted-hello receive list    1

mpls ldp targeted-hello send list    1

mpls ldp vpls commands    

mpls ldp vpls neighbor    1

mpls ldp vpls vpls-id    1

MPLS LSPs    

troubleshooting MTU problems in    

with a Martini circuit    1

with a VPLS instance    1

with an IP or IPv6 address    1

with an L3VPN or IPv6 address    1

with an RSVP-TE tunnel    1

MPLS Martini circuits    

adding on an ATM port    

restriction for transmission of multiple ATM VCs    1

transmission of multiple ATM virtual circuits    

between two ATM ports    1

over a single pseudowire    1

using the RSVP configuration    

on the same ATM port    1

MPLS ping feature    

data plane failure detection for egress nodes    

IP address in echo request matching with interface IP address    1

IP address in echo request not matching with interface IP address    1

detection of plane failures    

in point-to-multipoint MPLS LSPs at egress nodes    1

in point-to-multipoint LSPs    

type value for Echo Jitter TLV    1

P2MP Responder Identifier TLV    

checking for receipt of    1

relation with traceroute requests    

for point-to-multipoint LSPs    1

selecting the egress node for tracing path    

using IPv4 Egress Address P2MP Responder Identifier    1

using IPv4 Node Address P2MP Responder Identifier    1

using IPv6 Egress Address P2MP Responder Identifier    1

using IPv6 Node Address P2MP Responder Identifier    1

testing connectivity in point-to-multipoint LSPs, limitation    

at branch nodes    1

at ingress nodes    1

at transit nodes    1

using P2MP Responder Identifier TLV    

no response to the originator    1

success response to the originator    1

verifying connectivity at egress nodes in point-to-multipoint LSPs    

using Echo Jitter TLV    1

using P2MP Responder Identifier TLV    1

using RSVP P2MP IPv4 Session sub-TLV    1

mpls rsvp commands    

mpls rsvp    1, 2

mpls rsvp authentication    1

mpls rsvp authentication key    1

mpls rsvp bfd-liveness-detection    1

mpls rsvp disable    1

mpls rsvp egress-router    1

mpls rsvp profile    1, 2, 3

mpls rsvp signalling hello    1

mpls rsvp signalling hello graceful-restart recovery-time    1

mpls rsvp signalling hello graceful-restart restart-time    1

mpls rsvp signalling node-hello    1

mpls-relay atm cell-packing mcpt-timers command    1

mpls-relay atm vpi-range command    1

mpls-relay command    

prerequisite for configuring    

cell concatenation parameters for ATM ports    1

VCI/VPI range for ATM VCs transmission    1

MTU problems    

determining the exact LSR    

where size of echo requests exceeds MTU size    1

troubleshooting and verifying in    

MPLS LSPs with a Martini circuit    1

MPLS LSPs with a VPLS instance    1

MPLS LSPs with an IP or IPv6 address    1

MPLS LSPs with an L3VPN or IPv6 address    1

MPLS LSPs with an RSVP-TE tunnel    1

multicast IPv4 address family    1, 2, 3

multicast IPv6 address family    1, 2, 3

Multicast LDP FEC Stack sub-TLVs    

in echo requests    

and Egress Address P2MP Responder Identifier sub-TLVs    1

and Node Address P2MP Responder Identifier sub-TLVs    1

multiexit discriminator, BGP    1

multihoming    

for VPLS    1

multiple ATM VCs transportation    

over a single pseudowire    

VPI/VCI ranges    1

multiple ATM virtual circuits    

transmission over a single pseudowire    

ATMx port state    1

Multiprotocol Label Switching.     See MPLS (Multiprotocol Label Switching)    

multiservice layer 2 services    1

N

neighbor commands    

neighbor activate    1, 2, 3, 4

neighbor advertise-map    1

neighbor advertisement-interval    1

neighbor allow    1

neighbor allowas-in    1

neighbor as-override    1

neighbor bfd-liveness-detection    1

neighbor capability    1, 2

neighbor default-originate    1, 2

neighbor description    1

neighbor distribute-list    1

neighbor ebgp-multihop    1

neighbor filter-list    1

neighbor ibgp-singlehop    1

neighbor lenient    1

neighbor local-as    1

neighbor maximum-orf-entries    1

neighbor maximum-prefix    1, 2

neighbor maximum-update-size    1

neighbor next-hop-self    1, 2, 3, 4

neighbor passive    1

neighbor password    1

neighbor peer-group    1

neighbor peer-type    1

neighbor prefix-list    1, 2

neighbor prefix-tree    1

neighbor remote-as    1, 2

neighbor remote-as’    1

neighbor remove-private-as    1

neighbor rib-out disable    1

neighbor route-map    1

neighbor route-reflector-client    1

neighbor send-community    1

neighbor send-label    1

neighbor shutdown    1

neighbor site-of-origin    1

neighbor soft-reconfiguration inbound    1

neighbor timers    1

neighbor unsuppress-map    1

neighbor update-source    1, 2

neighbor weight    1, 2

neighbor graceful-restart commands    

neighbor graceful-restart    1

neighbor graceful-restart restart-time    1

neighbor graceful-restart stalepaths-time    1

neighbor weights (BGP), assign neighbor weights    1

neighbors (peers), BGP    

assigning weight to connections    1

distributing information in access lists    1

network area command    1

network commands    

network    1

network backdoor    1

network connections, trace MPLS    1

network prefixes, filtering    1

next hops, check reachability for BGP/MPLS VPNs    1

next-address command    1

next-hop processing, BGP    1

next-hop routers    

setting or redistributing routes for    1, 2

no synchronization command    1

no-advertise community, BGP    1

no-export community, BGP    1

Node Address P2MP Responder Identifier Sub-TLVs    

functionality of    1

Node Address P2MP Responder Identifier sub-TLVs    

sending of echo responses    

if sub-TLV address matches with node address    1

specifying    

IPv4 address of interface or router ID    1

IPv6 address of interface or router ID    1

nontransit service    1

notice icons    1

notification message, BGP    1

O

ORF (outbound route filtering)    1

Origin attribute    1

originator-ID, BGP    1

OSPF interaction with BGP/MPLS VPNs    1

backdoor link    1

configuration    1

domain identifier attribute    1

route type attribute    1

routes    

distributing between PEs    1

distributing from CE to PE    1

distributing from PE to CE    1

routing information, preserving    1

routing loops, preventing    1

sham link    1

outbound route filtering capability    1

overlapping VPN topologies, configuring with route targets    1

overlapping VPNs, configuring with route targets    1

overload shutdown command    1

P

P routers    1

P2MP Responder Identifier TLV    

conditions for echo response to originator    

echo request not sent to egress node    1

errors in TLV syntax    1

detecting data plane failures    

at egress nodes in point-to-multipoint MPLS LSPs    1

difference in type value for    

between Junos OS and IETF standard    1

echo response to originator    

in the absence of TLV in echo request    1

excluded from echo requests    

causes all nodes in path to ingress node to respond    1

response depends on Response Type field    1

including in    

MPLS echo request packets    1

IP address in the TLV matching with interface IP address    

success response to the sender    1

IP address in the TLV not matching with interface IP address    

no response to the sender    1

multiple sub-TLVs included in    

using subtype numbers for processing order    1

supported sub-TLVs for    

IPv4 Egress Address P2MP Responder Identifier    1

IPv4 Node Address P2MP Responder Identifier    1

IPv6 Egress Address P2MP Responder Identifier    1

IPv6 Node Address P2MP Responder Identifier    1

to process MPLS LSP ping messages, echo requests    

validation of IP address in the TLV with interface address    1

tracing the path from an ingress node    

in point-to-multipoint LSPs    1

type number, 11    1

type value defined in    

IETF draft, Detecting Data Plane Failures in Point-to-Multipoint Multiprotocol Label Switching (MPLS) - Extensions to LSP Ping    1

type value reconciliation between    

Junos OS and IETF draft    1

without sub-TLVs included in    

ignoring the entire TLV in echo requests    1

parallel routes, maximum number of    1

passive peers, BGP    1

passthrough for ATM over MPLS    

control word support    1

OAM cells    1

QoS classification    1

path attribute, BGP    1

path trigger delay command    1

path, BGP    1

PE routers    1

peer groups, BGP    1

configuring    1

peer reachability    

RSVP-TE    1

peer type, set the BGP    1

peers (neighbors), BGP    

assigning weights to    1

distributing information in access lists    1

passive    1

promiscuous    1

per-hop behavior    1

nonstandard    1

per-hop scheduling class    1

performance impact    

on routers    

and transmission of multiple ATM VCs over single pseudowire    1

PHB.     See per-hop behavior    

ping feature for MPLS networks    

connectivity verification    

for egress nodes in point-to-multipoint LSPs    1

unavailable in point-to-multipoint LSPs    

for routers as branch nodes    1

for routers as ingress nodes    1

for routers as transit nodes    1

ping feature in MPLS networks    

detecting data plane failures for egress nodes    

type value for Echo Jitter TLV    1

P2MP Responder Identifier TLV    

checking for receipt of    1

relation with traceroute requests    

for point-to-multipoint LSPs    1

selecting the egress node for tracing path    

using IPv4 Egress Address P2MP Responder Identifier    1

using IPv4 Node Address P2MP Responder Identifier    1

using IPv6 Egress Address P2MP Responder Identifier    1

using IPv6 Node Address P2MP Responder Identifier    1

verifying connectivity at egress nodes in point-to-multipoint LSPs    

using Echo Jitter TLV    1

using P2MP Responder Identifier TLV    1

using RSVP P2MP IPv4 Session sub-TLV    1

ping mpls commands    

detecting plane failures    

in point-to-multipoint MPLS LSPs    1

for detection of data plane failures    

at egress nodes in point-to-multipoint LSPs    1

ping mpls ip    1

ping mpls l2transport    1

ping mpls l3vpn    1

ping mpls rsvp tunnel    1

ping mpls vpls    1

platform considerations    

BGP    1

BGP/MPLS VPNs    1

L2VPNs    1

layer 2 services over MPLS    1

MPLS    1

VPLS    1

point-to-multipoint LDP LSPs    

error response    

during connectivity verification    1

point-to-multipoint LSPs    

traceroute requests    

tracking the path to egress nodes in    1

point-to-multipoint MPLS LSPs    

configuring routers as egress nodes in    1

connectivity verification    

for egress nodes in    1

detecting plane failures in    

using ping mpls commands    1

TLVs for verifying connectivity at egress nodes    

Echo Jitter TLV    1

P2MP Responder Identifier TLV    1

RSVP P2MP IPv4 Session sub-TLV    1

point-to-point MPLS LSPs    

detection of plane failures in    

with different MPLS applications    1

troubleshooting and verifying MTU problems in    

LSPs with a Martini circuit    1

LSPs with a VPLS instance    1

LSPs with an IP or IPv6 address    1

LSPs with an L3VPN or IPv6 address    1

LSPs with an RSVP-TE tunnel    1

policies    

reconfiguring BGP    1

policies, test BGP    1

policies, VPLS subscriber.     See subscriber policies for VPLS    

prefixes    

BGP    1

filter network    1

promiscuous peers, BGP    1

provider core routers.     See P routers    

provider edge routers.     See PE routers    

PSC.     See per-hop scheduling class    

pseudowire (PW) type    

used for cell relay encapsulation of a single VC    

versus multiple VCs    1

used for cell relay for a single VC    

on an ATM subinterface    1

used for cell relay for multiple VCs    

on an ATM port    1

pseudowires    

associating an ATM port with    

before configuring cell concatenation    1

before configuring VCI/VPI ranges    1

configuration on both ends of the    

matching in the VP/VCI range    1

not matching in the VPI/VCI range    1

failure detection    

change of state on the ATMx port    1

multiple ATM virtual circuits    

and emulation of connectivity between two ATM ports    1

transportation of multiple ATM virtual circuits    

over a single wire    1

using a single wire for multiple VCs transport    

topology example    1

PWid FEC element TLV, for VPLS with LDP signaling    1

R

rd command    1

reachability    

verify and troubleshoot MPLS    1

reconvergence of BGP/MPLS VPN networks, fast    1

redistribute command    1

redistribution routes    

disable dynamic (BGP)    1

refresh messages, MPLS    1

refresh-period command    1, 2

remote-neighbor command    1

reoptimization and backup    1

reset BGP sessions    1

Response Type field    

contained in echo requests    

echo response from egress nodes    1

without P2MP Responder Identifier TLV in echo requests    1

controlling MPLS echo responses    1

RFC 4364—BGP/MPLS IP Virtual Private Networks (VPNs) (February 2006)    1, 2

RFC 4816—Pseudowire Emulation Edge-to-Edge (PWE3) Asynchronous Transfer Mode (ATM) Transparent Cell Transport Service (February 2007)    1

RIB (routing information base)    

core non-VPN RIB    1, 2

core VPN RIB    1, 2

disabling RIBs-Out    1

rib-out disable command    1

route distinguisher    1

route interface command    1, 2, 3

prerequisite for configuring    

cell concatenation parameters for ATM ports    1

route interface tunnel command    

prerequisite for configuring    

VCI/VPI range for ATM VCs transmission    1

route maps, BGP    1

assigning neighbor weights    1

filtering incoming/outgoing routes    1

setting local preferences    1

route reachability information, BGP/MPLS VPN    1

route reflectors    1

route target    

defining BGP/MPLS VPN    1

route targets    

configuring VPN topologies    1

export list    1

for VPN topologies    1

import list    1

route- refresh message , BGP    1

route-map command    1

route-refresh capabilities    1

route-target address family    1, 2

route-target command    1

route-target extended community    1

route-target filtering, advertisement rules with    1

route-target filters    1

route-target membership attribute    1

router commands    

router bgp    1, 2, 3, 4

router ospf    1

routes    

BGP    1

conditionally advertising BGP    1

processing of received routes for BGP/MPLS VPNs    1

redistributing into BGP    1

using BGP    1

routing and forwarding instance.     See VRF    

routing table    

global BGP non-VPN    1, 2, 3

global BGP VPN    1, 2

routing, BGP    

conditional    1

confederation    1

default routes, configuring    1

maximum number of parallel routes    1, 2

path selection process    1

policy configuration    1

reduce the number of meshed peers    1

route flapping and flap damping    1

route reflectors    1

routing, IP    

monitoring    1

RSVP P2MP IPv4 Session sub-TLV    

contained in the Target FEC Stack TLV    

of MPLS echo request packets    1

detecting data plane failures    

at egress nodes in point-to-multipoint MPLS LSPs    1

type number of    1

validation of point-to-multipoint LSP ping feature    

with RSVP-TE    1

RSVP P2MP Session sub-TLVs    

in echo requests    

and Egress Address P2MP Responder Identifier sub-TLVs    1

and Node Address P2MP Responder Identifier sub-TLVs    1

RSVP-TE (Resource Reservation Protocol with traffic engineering extensions)    1

BFD liveness detection and    1

bypass tunnels    1

detecting path failures    1

fast reroute extensions    1

graceful restart    1

announcement of    1

preserving established LSP labels    1

recovery period    1

recovery time    1

restart time    1

restarting behavior    1

hello messages    1

MD5 authentication    1

overview    1

peer reachability    1

purging learned routes    1

refresh reduction    1

state synchronization    1, 2

RSVP-TE protocol    

configuring routers as egress nodes    

in point-to-multipoint MPLS LSPs    1

validation with    

by point-to-multipoint MPLS LSP ping application    1

RT-MEM-NLRI attribute    1

S

S-VLAN Subinterface with an Untagged C-VLAN ID    

overview    1

S-VLANs (stacked virtual local area networks)    

configuring tunnel interfaces    1

interface stacking    1

tunnels    1

SAR scheduler    

scaling limitation    

and number of ATM VCs in the VCI/VPI ranges    1

scaling limitations    

and support of multiple VCs over a single pseudowire    1

scalability considerations    

transmission of multiple ATM VCs over a single pseudowire    

and VCI/VPI ranges    1

scaling limitations    

on SAR scheduler    

and support of multiple VCs over a single pseudowire    1

sessions, BGP    

assigning interface to    1

reset and clear    1

resetting and clearing    1, 2

set commands    

set comm-list delete    1

set community    1

set dampening    1, 2

set distance    1

set extcommunity    1

set ip next-hop    1

set level    1

set local-preference    1

set metric    1

set metric-type    1

set mpls-label    1

set origin    1

set route-type    1

set tag    1

set weight    1

sham link for OSPF and BGP/MPLS VPNs    1

shim interfaces    

configuring VCI/VPI ranges    

for transmission of multiple ATM VCs over a single pseudowire    1

shim interfaces, MPLS    1, 2, 3

show atm commands    

show atm mcpt-timers    1

show atm subinterface    1

show bridge commands    

show bridge    1

show bridge groups    1

show bridge interface    1

show bridge interface vpls    1

show bridge port    1

show bridge table    1

show cac commands    

show cac    1

show cac interface    1

show configuration commands    

show configuration    1

show ip bgp commands    1

show ip bgp commands    1

show ip bgp l2vpn    1, 2

show ip bgp l2vpn vpls    1

show ip bgp next-hops    1, 2

show ip commands    

show ip tunnel-route    1

show ipv6 commands    

show ipv6 tunnel-route    1

show l2vpn commands    

show l2vpn connections    1

show l2vpn instance    1

show l2vpn interface    1

show ldp commands    

show ldp    1

show ldp binding    1

show ldp interface    1

show ldp neighbor    1

show ldp profile    1

show ldp statistics    1

show ldp targeted-hello    1

show ldp vpls    1

show mpls commands    

show mpls    1, 2, 3

show mpls binding    1

show mpls cross-connects atm    1

show mpls explicit-paths    1

show mpls fast-reroute database    1

show mpls forwarding    1, 2, 3, 4

show mpls interface    1

show mpls interface shim    1

verifying cell concatenation configuration for multiple ATM VCs transport    1

verifying VCI/VPI range specificationn for multiple ATM VCs transport    1

show mpls l2transport interface    1, 2

verifying cell concatenation configuration for multiple ATM VCs transport    1

verifying VCI/VPI range for multiple ATM VCs transport    1

show mpls next-hop    1

show mpls phb-id    1

show mpls profile    1

show mpls rsvp    1

show mpls rsvp authentication    1

show mpls rsvp bfd interfaces    1

show mpls rsvp counters    1

show mpls rsvp hello graceful restart    1

show mpls rsvp hello instance    1

show mpls rsvp profile.    

show mpls profile     See show mpls commands show mpls profile    

show mpls tunnels    1

show mpls tunnels profile.    

show mpls profile     See show mpls commands show mpls profile    

show mpls ldp commands     See show ldp commands    

show mpls ldp igp-sync    1

show subscriber-policy command    1

show vpls connections command    1

signaling, VPLS    

BGP overview    1

LDP overview    1

single-hop IBGP peers    1

soft clear of BGP sessions    1

speakers, BGP    1

route reflection and    1

srefresh messages    1

subscriber policies for VPLS    1

subset of ATM virtual circuits    

transportation over a single pseudowire    

configuring and    1

summary refresh messages, MPLS    1

summary-only keyword (aggregate-address)    1

support, technical     See technical support    

switch, 802.3ad    1

synchronization    

enabling BGP    1

LDP-IGP    1

synchronization command    1

T

table-map command    

BGP    1

targeted hellos and LDP extended discovery    1

targeted sessions, for VPLS with LDP signaling    1

technical support    

contacting JTAC    1

test bgp ipv6 command    1

test ip bgp neighbor command    1, 2

text and syntax conventions    1

timers bgp command    1

topology-driven LSPs, MPLS    1

trace mpls commands    

for detection of data plane failures    

at egress nodes in point-to-multipoint LSPs    1

trace mpls ip    1

trace mpls l2transport    1

trace mpls l3vpn    1

trace mpls rsvp tunnel    1

trace mpls vpls    1

traceroute requests    

in point-to-multipoint LSPs    

no additional configuration needed    1

processed the same way as ping requests    1

tracing the path to egress nodes    1

responses to    

and ping feature in point-to-multipoint LSPs    1

sent by ingress nodes    

in point-to-multipoint LSPs    1

transit service    1

transparent bridging and VPLS    1

transport virtual router, configure for VPLS    1

transportation of multiple ATM VCs    

over a single pseudowire    

and VPI/VCI ranges    1

trigger delay    1

troubleshooting    

BGP    1

ttl command    1

TTL processing, MPLS    

expiration rules    1

in the platform label space    1

tunnel commands    

tunnel destination    1, 2

tunnel mpls commands    

tunnel mpls affinity    1, 2

tunnel mpls autoroute announce    1, 2

tunnel mpls autoroute metric    1, 2

tunnel mpls bandwidth    1, 2

tunnel mpls description    1, 2

tunnel mpls diff-serv phb-id    1

tunnel mpls fast-rerout    1

tunnel mpls lsp retries    1, 2

tunnel mpls lsp retry-time    1, 2

tunnel mpls no-route retries    1, 2

tunnel mpls no-route retry-time    1, 2

tunnel mpls path-option    1, 2, 3, 4

tunnel mpls priority    1, 2

tunnels    

IPv6 over IPv4 BGP/MPLS VPNs    1

U

unicast hop popping, MPLs    1

unicast IPv4 address family    1, 2, 3

unicast IPv6 address family    1, 2, 3

update-source command    1, 2

updates, BGP    

AS-path filters for    1

in indirectly connected networks    1

message explanation    1

minimum interval between sending    1

V

VCC (virtual channel connection) cell relay encapsulation, ATM    

configuring    1

overview    1

VCI/VPI ranges    

configuration dependent on    

associating the ATM port with the pseudowire    1

configuration for multiple VCs transmission    

activated, deactivated    1

requirements for configuration of    

for multiple ATM VCs transportation    1

VEs (VPLS edge devices)    1

virtual channel connection.     See VCC cell relay encapsulation    

virtual private LAN service.     See VPLS (virtual private LAN service)    

Virtual Private Wire Service.     See VPWS (virtual private wire service L2VPNs)    

virtual-router command    1

VPI/VCI ranges    

configuring for multiple VCs transport    

guidelines to be followed    1

configuring using    

the mpls-relay atm vpi-range command    1

matching configurations    

on both sides of the pseudowire for multiple VCs transmission    1

maximum number supported    

for multiple VCs transport over a single pseudowire    1

mismatching configurations    

on both sides of the pseudowire for multiple VCs transmission    1

number of ATM VCs in the specified configuration    

and scaling limit of the SAR device    1

VPLS (virtual private LAN service)    

BGP-based    

address families, configuring    1

BGP signaling, configuring    1, 2

BGP/MPLS VPNs    1

configuration example    1

configuration tasks for BGP signaling    1

L2VPN address family    1, 2

loopback interface and router ID, configuring    1

sample topology, configuring    1

signaling overview    1

VPLS address family    1, 2

VPLS instances for BGP signaling, configuring    1

CEs (customer edge devices)    1

clear    

BGP attributes    1

BGP reachability    1

BGP route flap dampening    1

BGP wait for end-of-RIB marker    1

forwarding tables    1

LDP attributes    1

configure    

MPLS LSPs    1

subscriber policies    1

VPLS instances    1

VPLS network interfaces    1

features supported    1

forwarding tables    

clearing    1

overview    1

instances    

overview    1

LDP-based    

configuration example    1

configuration tasks for LDP signaling    1

LDP signaling, configuring    1, 2

loopback interface and router ID, configuring    1

monitoring LDP-related settings    1

sample topology, configuring    1

signaling overview    1

VPLS instances for LDP signaling, configuring    1

module support    1

monitor    

MPLS-related settings    1

statistics baselines    1

VPLS-specific settings    1

multihoming    1

network interfaces    

configuring    1

module support    1

overview    1

subscriber policies    1

platform considerations    1

references    1

subscriber policies on    1

transparent bridging, comparison to    1

transport virtual router, configure    1

VEs (VPLS edge devices)    1

virtual core interfaces    

module support    1

overview    1

VPLS domains    1

VPLS address family    1, 2, 3, 4, 5

VPLS edge devices.     See VEs    

VPN-IPv4    

address    1

exchanging addresses    1

VPN-IPv4 address family    1, 2, 3

VPN-IPv6 address family    1, 2, 3

VPNs (virtual private networks    

BGP/MPLS hub-and-spoke example    1

VPNs (virtual private networks)    

BGP/MPLS    1

BGP/MPLS fully meshed example    1

carrier-of-carriers    1

carrier-of-carriers IPv4    1

configuring VPN topologies with route targets    1

default route to shared interface    1

ECMP    1

fallback global    1

example    1

full-mesh VPN topologies, configure with route targets    1

hierarchical    1

providing Internet access    1

secondary routing table lookup    1

static routes to shared IP interface    1

traffic flow from Internet to VPN    1

traffic flow from VPN to Internet    1

VPWS (virtual private wire service L2VPNs)    

address families, configure    1

BGP signaling, configuring    1

BGP/MPLS VPNs    1

CE (customer edge device)    1

clear    

BGP reachability    1

BGP route flap dampening    1

BGP wait for end-of-RIB marker    1

components    1

configuration example    1

configure    

address families    1

BGP signaling    1

L2VPN instances    1

L2VPN interfaces    1

MPLS LSPs    1

sample topology    1

features supported    1

instances    

configure    1

overview    1

interfaces    

configure    1

L2VPN address family    1

module support    1

monitor    

BGP-related settings    1

L2VPN-specific settings    1

MPLS-related settings    1

MPLS, configure    1

network interfaces    

overview    1

overview    1

PE (provider edge router)    1

platform considerations    1

references    1

VPWS address family    1, 2

VPWS address family    1, 2, 3, 4, 5, 6

VRF (VPN routing and forwarding instance)    1

carrier-of-carriers    1

exporting imported routes    1

exporting routes to global BGP non-VPN routing table    1

importing routes    1, 2

routes, exporting and importing    1

W

weights, BGP neighbor    1

assign with neighbor weight command    1

assigning with access list    1

assigning with filter list    1

assigning with route maps    1