[Contents][Prev][Next][Report an Error]

OC3/STM1 ATM Single-Mode Intermediate Reach With APS/MSP Redundancy Module Combination

Line module label OCx/STMx ATM or OCx/STMx /DS3-ATM

I/O module label 4XOC3
APS I/O
SINGLE MODE

Number of I/O ports

4 active, 4 redundant

Software release

First supported: 5.1.2, 5.2.0 (APS/MSP)

Final supported: Not applicable

The OCx/STMx ATM line module or the OCx/STMx /DS3-ATM line module must have a minimum of 256 MB of memory to be used with JUNOSe Release 5.3.0 or a higher-numbered release.

Description

130 W

Can use either the 128-MB OCx/STMx ATM line module or the 256-MB OCx/STMx /DS3-ATM line module.

Unchannelized, concatenated OC3/STM1 for ATM

Type

ASIC

Capability

OC3/STM-1

ATM/AAL5

Software features

See OCx/STMx ATM Modules for information about the layer 2 and layer 3 protocols and applications that this module combination supports.

Model compatibility

ERX-7xx models

ERX-14xx models

ERX-310 router

SRP module compatibility

SRP-5G+

SRP-10G

SRP-40G

SRP-40G PLUS

SRP-SE10G

Module redundancy support

1:N redundancy

NOTE: Line module redundancy is not supported on the ERX-310 router.

Cables and connectors

LC full duplex

Tx power:

min: –15 dBm

max: –8 dBm

Center wavelength: 1310 nm

Rx input power:

min: –31 dBm

max: –8 dBm

Rated for 15 km (9.3 miles) of 9-micron core cable

See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.

LEDs

See Module LEDs.

Alarms, errors, and events

See Monitoring SONET/SDH Interfaces in JUNOSe Physical Layer Configuration Guide, Chapter 3, Configuring Unchannelized OCx/STMx Interfaces.

[Contents][Prev][Next][Report an Error]

Line module label	OCx/STMx ATM or OCx/STMx /DS3-ATM
I/O module label	4XOC3 APS I/O SINGLE MODE
Number of I/O ports	4 active, 4 redundant
Software release	First supported: 5.1.2, 5.2.0 (APS/MSP) Final supported: Not applicable The OCx/STMx ATM line module or the OCx/STMx /DS3-ATM line module must have a minimum of 256 MB of memory to be used with JUNOSe Release 5.3.0 or a higher-numbered release.
Description	130 W Can use either the 128-MB OCx/STMx ATM line module or the 256-MB OCx/STMx /DS3-ATM line module. Unchannelized, concatenated OC3/STM1 for ATM
Type	ASIC
Capability	OC3/STM-1 ATM/AAL5
Software features	See OCx/STMx ATM Modules for information about the layer 2 and layer 3 protocols and applications that this module combination supports.
Model compatibility	ERX-7xx models ERX-14xx models ERX-310 router
SRP module compatibility	SRP-5G+ SRP-10G SRP-40G SRP-40G PLUS SRP-SE10G
Module redundancy support	1:N redundancy NOTE: Line module redundancy is not supported on the ERX-310 router.
Cables and connectors	LC full duplex Tx power: min: –15 dBm max: –8 dBm Center wavelength: 1310 nm Rx input power: min: –31 dBm max: –8 dBm Rated for 15 km (9.3 miles) of 9-micron core cable See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
LEDs	See Module LEDs.
Alarms, errors, and events	See Monitoring SONET/SDH Interfaces in JUNOSe Physical Layer Configuration Guide, Chapter 3, Configuring Unchannelized OCx/STMx Interfaces.