Skip to content

Support



Juniper was the first North American IP routing vendor to achieve the prestigious TL 9000 certification by the Quality of Excellence for Suppliers of Telecommunications (QuEST) Forum in the router category, for design, development, provision and service and support.



What is J-Care?

It's the world-class service and support that you expect from a company that delivers the industry's best infrastructure and security products. With J-Care, you now have the confidence knowing that Juniper will do our part to keep you on top of the world!


Configuring Rate Shaping for a Scheduler Node or Queue

The router supports 64,000 rate shapers per line module. Shaping rates are multiples of 1 Kbps.

To configure a shaping rate for a scheduler node or queue:

  1. Create a scheduler profile.
    host1(config)#scheduler-profile video host1(config-scheduler-profile)#
  2. Specify a shaping rate in the scheduler profile.
    host1(config-scheduler-profile)#shaping-rate 128000 burst 32767 milliseconds host1(config-scheduler-profile)#shaping-rate 5000 x 90

    The range for the shared-shaping rate is 1000–1000000000 bps (1 Kbps–1000 Kbps); the default is the minimum shaping rate (1 Kbps). The router rounds the rate to the next higher 8 Kbps.

    Use the operator and operandValue variables to configure a shaping rate with an expression.

    You can use the bps or kbps keywords to specify the unit of the shaping rate. By default, the shaping rate is configured in bps.

    Use the burst keyword to specify the catch-up number associated with the shaper; the range is 0–522240. Specifying 0 enables the router to select an applicable default value.

    Use the milliseconds or bytes keywords to specify the unit of the burst size.

Published: 2009-12-16