- Download
Software
- Research a
Problem - Case Management
- Communities and Forums
- Contract & Product Management
- Technical Documentation Advanced Search
- Documentation Feedback Form
- Documentation Symbols Key
- End-of-Life Products
- Guidelines and Policies
- Security Resources
Juniper was the first North American IP routing vendor to achieve the prestigious TL 9000 certification by the Quality of Excellence for Suppliers of Telecommunications (QuEST) Forum in the router category, for design, development, provision and service and support.
What is J-Care?
It's the world-class service and support that you expect from a company that delivers the industry's best infrastructure and security products. With J-Care, you now have the confidence knowing that Juniper will do our part to keep you on top of the world!
- Downloads
- Creating Parameter Instances
- Related Topics
- Parameter Instances for QoS Clients Overview
- For information about creating QoS parameter instances for Service Manager, see JUNOSe Broadband Access Configuration Guide
- atm-vp qos-parameter
- atm vp-tunnel
- encapsulation vlan
- interface
- qos-parameter
- svlan id
- svlan qos-parameter
Creating Parameter Instances
You can create QoS parameter instances globally, for an interface, or for a subinterface.
Tasks to create parameter instances are:
Creating a Global Parameter Instance
To create a global parameter instance:
- Create a parameter instance in Global Configuration mode.host1(config)#qos-parameter max-subscriber-bandwidth 6000000
Creating a Parameter Instance for an Interface
To create a parameter instance for an interface:
- Specify an interface.host1(config)#interface atm 11/0.1 host1(config)#interface gigabitEthernet 2/0
- Specify the parameter name and the value.host1(config-subif)#qos-parameter max-subscriber-bandwidth 6000000
Creating a Parameter Instance for an ATM VP
Use this procedure to attach a parameter instance to a VP on the interface. Optionally, use the qos-profile keyword to attach a parameter instance to a QoS profile.
To create a parameter instance for an ATM VP:
- Configure the ATM VP.host1(config)#interface atm 2/0 host1(config-if)#atm vp-tunnel 4
- Do either of the following:
- Attach the parameter instance to an ATM VP on the interface.host1(config-if)#atm-vp 4 qos-parameter max-subscriber-bandwidth 375000
- Attach the parameter instance and associate with the QoS
profile. host1(config-if)#atm-vp 4 qos-profile video qos-parameter max-subscriber-bandwidth 375000
- Attach the parameter instance to an ATM VP on the interface.
Creating a Parameter Instance for an S-VLAN
Use this procedure to attach a parameter instance to a specified S-VLAN ID on the interface. Optionally, use the qos-profile keyword to attach a parameter instance to a QoS profile.
To create a parameter instance for an S-VLAN:
- Specify the Ethernet interface and create the
VLAN. host1(config)#interface gigabitEthernet 3/0 host1(config-if)#encapsulation vlan host1(config-if)#interface gigabitEthernet 3/0.1
- Specify the S-VLAN ID. host1(config-if)#svlan id 1 202
- Attach the parameter instance to an S-VLAN
ID on the interface.host1(config-if)#svlan 202 qos-parameter max-subscriber-bandwidth 6000000
