- Download
Software
- Research a
Problem - Case Management
- Communities and Forums
- Contract & Product Management
- Technical Documentation Advanced Search
- Documentation Feedback Form
- Documentation Symbols Key
- End-of-Life Products
- Guidelines and Policies
- Security Resources
Juniper was the first North American IP routing vendor to achieve the prestigious TL 9000 certification by the Quality of Excellence for Suppliers of Telecommunications (QuEST) Forum in the router category, for design, development, provision and service and support.
What is J-Care?
It's the world-class service and support that you expect from a company that delivers the industry's best infrastructure and security products. With J-Care, you now have the confidence knowing that Juniper will do our part to keep you on top of the world!
- Related Topics
- Example: QoS Parameter Configuration for QoS Downstream Rate
- For information about downstream rate and RADIUS, see JUNOSe Broadband Access Configuration Guide
- For more information about configuring ANCP (L2C) parameters, see JUNOSe IP Services Configuration Guide
- aaa qos downstream-rate
- controlled-interface-type
- encapsulation vlan
- instance-interface-type
- ip address
- node
- qos-parameter
- qos-adaptive-mode
- qos-parameter-define
- qos-profile
- queue
- shared-shaping-rate
- subscriber-interface-type
- traffic-class
- vlan id
Configuring a Parameter Definition for QoS Downstream Rate
To associate a parameter instance with the QoS downstream rate application:
- Configure traffic classes.host1(config)#traffic-class voice host1(config-traffic-class)#exit host1(config)#traffic-class best-effort host1(config-traffic-class)#exit
- Create a parameter definition for the QoS downstream rate
application.
- Configure the QoS parameter name and the application.host1(config)#qos-parameter-define downstreamVLAN application qos-downstream-rate
- Configure controlled-interface types.host1(config-qos-parameter-define)#controlled-interface-type vlan host1(config-qos-parameter-define)#controlled-interface-type ip
- Configure subscriber-interface types.host1(config-qos-parameter-define)#subscriber-interface-type vlan
- Configure the QoS parameter name and the application.
- Do one of the following:
- For VLANs, configure the shaping mode by creating a parameter
definition with the QoS cell mode application. Ensure that you specify
a subscriber-interface type.
See Configuring a Parameter Definition to Shape Ethernet Traffic Using Cell Mode.
- For ATM VCs, configure the shaping mode by issuing the qos-shaping-mode command.
- For VLANs, configure the shaping mode by creating a parameter
definition with the QoS cell mode application. Ensure that you specify
a subscriber-interface type.
- Enable QoS adaptive mode for the system by issuing the qos-adaptive-mode command in L2C Configuration mode.host1(config)#l2c host1(config-l2c)#qos-adaptive-mode
- Enable the QoS downstream rate application to use downstream
rates obtained from the Actual-Data-Rate-Downstream [26-130] DSL Forum
VSA. host1(config)#aaa qos downstream-rate
- Configure the scheduler profile for the shaping rate.host1(config)#scheduler-profile vlan1 host1(config-scheduler-profile)#shared-shaping-rate downstreamVLAN * 5 auto
- Configure the QoS profile for the shaping rate.host1(config)#qos-profile vlan1 host1(config-qos-profile)#vlan node scheduler-profile vlan1
- Attach the QoS profile to a logical Ethernet interface.
ANCP or AAA dynamically creates the parameter instances for the QoS downstream rate application, and if applicable, the QoS cell mode application; therefore, you do not need to specify them.
host1(config)#interface gigabitEthernet 6/0/2 host1(config-if)#encapsulation vlan host1(config-if)#interface gigabitEthernet 6/0/2.1 host1(config-if)#vlan id 1 host1(config-if)#qos-profile vlan1 host1(config-if)#ip address 6.10.10.10 255.255.255.255
