Skip to content

Support



Juniper was the first North American IP routing vendor to achieve the prestigious TL 9000 certification by the Quality of Excellence for Suppliers of Telecommunications (QuEST) Forum in the router category, for design, development, provision and service and support.



What is J-Care?

It's the world-class service and support that you expect from a company that delivers the industry's best infrastructure and security products. With J-Care, you now have the confidence knowing that Juniper will do our part to keep you on top of the world!


Configuring QoS on the E Series Router

Several of the tasks for configuring QoS on your E Series router are optional.

To configure QoS on your E Series router:

  1. Create and configure a traffic class.

    See Traffic Class and Traffic-Class Groups Overview.

  2. (Optional) Create one or more traffic-class groups.

    See Traffic Class and Traffic-Class Groups Overview.

  3. (Optional) To configure nondefault buffer management, create a queue profile.

    See Queuing and Buffer Management Overview.

  4. (Optional) To configure RED or WRED, create a drop profile.

    See Dropping Behavior Overview.

  5. (Optional) To gather rate statistics, create a statistics profile.

    See QoS Statistics Overview.

  6. Configure a scheduler hierarchy with a scheduler profile.

    See Scheduler Hierarchy Overview.

  7. (Optional) Configure shaping:
  8. Create a QoS profile. QoS profiles reference queue, drop, statistics, and scheduler profiles.

    See Queuing and Buffer Management Overview.

  9. Attach the QoS profile to one or more interfaces, or specify the profile as a QoS port-type profile for a given interface type.

    See Queuing and Buffer Management Overview.

Published: 2010-01-12