[ Contents] [ Prev] [ Next] [ Report an Error]

GE Single-Mode Module Combination (1 Port)

Line module label GE/FE
I/O module label GE I/O
SINGLE MODE
Number of I/O ports
  • 1 active, 1 redundant
Software release
  • First supported: 2.0.0
  • Final supported: Not applicable
Description
  • 130 W
  • Gigabit Ethernet
  • This module combination has been superseded by a newer assembly; however, it is supported by current software.
Type
  • ASIC
Capability
  • Ethernet (IEEE 802.3z)
Software features
  • See Ethernet Modules for information about the layer 2 and layer 3 protocols and applications that this module combination supports.
Model compatibility
  • ERX-7xx models
  • ERX-14xx models
  • ERX-310 router
SRP module compatibility
  • SRP-5G+
  • SRP-10G
  • SRP-40G
  • SRP-40G PLUS
  • SRP-SE10G
Module redundancy support
  • Not applicable
Cables and connectors
  • SC full duplex
  • Tx power:
    • min: –11 dBm
    • max: –3 dBm
  • Center wavelength: 1300 nm
  • Rx input power:
    • min: –20 dBm
    • max: –3 dBm
  • Rated for 550 m (601 yards) over 62.5-micron core or 50-micron core MM fiber
  • Rated for 5 km (3.1 miles) over 10-micron core cable
  • See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
LEDs
Alarms, errors, and events
  • See Monitoring Ethernet Interfaces in JUNOSe Physical Layer Configuration Guide, Chapter 5, Configuring Ethernet Interfaces.
[ Contents] [ Prev] [ Next] [ Report an Error]