SRP IOA

Module label	SRP IOA
IOA label	Not applicable
Number of IOA ports	3
Software release	First supported: 7.0.1
Description	10 W Pairs with SRP module Interfaces with the SRP modules through the system's midplane.
Capability	Ethernet (IEEE 802.3) 10/100Base-T RS-232 Auxiliary port allows access to debug ports on a specific processor (SRP module, LM)
Software features	Not applicable
Model compatibility	E320 router E120 router
Line module compatibility	Not applicable
SRP module compatibility	SRP-100 SRP-120 SRP-320
Port redundancy support	Not applicable
Cables and connectors	Terminal blocks Two dual-purpose BNC connectors (primary and secondary) for BITS timing clock sources (E1 or T1); 75–ohm E1 2.048–Mbps/T1 1.544–Mbps inputs terminating with a 120/75 ohm or 100/75 ohm balun One 10/100Base-T Ethernet management port with an RJ-45 connector Two RS-232 ports with DB-9 connectors for direct command line interface (CLI) and debug access See E120 and E320 Hardware Guide, Chapter 5, Cabling the Router for more information.
LEDs	None
Alarms, errors, and events	See Monitoring Modules in JUNOSe System Basics Configuration Guide, Chapter 6, Managing Modules.

Copyright © 2007, Juniper Networks, Inc. All Rights Reserved. Trademark Notice.