- Download
Software
- Research a
Problem - Case Management
- Communities and Forums
- Contract & Product Management
- Technical Documentation Advanced Search
- Documentation Feedback Form
- Documentation Symbols Key
- End-of-Life Products
- Guidelines and Policies
- Security Resources
Juniper was the first North American IP routing vendor to achieve the prestigious TL 9000 certification by the Quality of Excellence for Suppliers of Telecommunications (QuEST) Forum in the router category, for design, development, provision and service and support.
What is J-Care?
It's the world-class service and support that you expect from a company that delivers the industry's best infrastructure and security products. With J-Care, you now have the confidence knowing that Juniper will do our part to keep you on top of the world!
- Related Topics
- Byte Adjustment for ADSL and VDSL Traffic Overview
- Guidelines for Configuring Byte Adjustment of Cell and Frame Shaping Rates Using QoS Parameters
- Example: QoS Parameter Configuration for QoS Cell Mode and Byte Adjustment for Cell Shaping
- For information about managing packet fragmentation for traffic with frame shaping mode, see Configuring a Parameter Definition to Adjust Frame Shaping Rates for VDSL Traffic
- For more information about configuring shaping modes for Ethernet, see QoS Shaping Mode for Ethernet Interfaces Overview and Cell Shaping Mode Using QoS Parameters Overview
- controlled-interface-type
- encapsulation vlan
- instance-interface-type
- ip address
- node
- qos-parameter
- qos-parameter-define
- qos-profile
- queue
- traffic-class
- vlan id
Configuring a Parameter Definition to Adjust Cell Shaping Rates for ADSL Traffic
You can adjust shaping rates to account for different layer 2 encapsulations as well as the ATM cell pad, header, and trailer on interfaces with cell shaping mode using the qos-byte-adjustment application.
 | Note: When you apply a parameter with the qos-byte-adjustment application to an interface with frame shaping mode, you adjust shaping rates to account for different layer 2 encapsulations only. |
To associate a parameter instance with the byte adjustment application:
- Configure the traffic classes.host1(config)#traffic-class voice host1(config-traffic-class)#exit host1(config)#traffic-class best-effort host1(config-traffic-class)#exit
- Create a parameter definition.
- Configure the QoS parameter name and the application.host1(config)#qos-parameter-define byteadjust1 application qos-byte-adjustment
- Configure a controlled-interface type.host1(config-qos-parameter-define)#controlled-interface-type vlan host1(config-qos-parameter-define)#controlled-interface-type ip
- Configure an instance-interface type.host1(config-qos-parameter-define)#instance-interface-type vlan
- Configure the QoS parameter name and the application.
- Do one of the following:
- Configure the shaping mode by issuing the qos-shaping-mode command.
Frame shaping mode is the default for Ethernet interfaces on all E Series routers. You can only set the cell shaping mode for Gigabit Ethernet and 10-Gigabit Ethernet interfaces configured on the GE-2 line module, the GE-HDE line module, and the ES2 4G LM.
- Configure the shaping mode by specifying the QoS cell
mode application with a parameter definition.host1(config)#qos-parameter-define cell-mode application qos-cell-mode
- Configure the shaping mode by issuing the qos-shaping-mode command.
- Attach the parameter definition to a logical Ethernet
interface.
In this example, parameter instances are created for both the byte adjustment and QoS cell mode applications.
host1(config)#interface gigabitEthernet 7/0 host1(config-if)#encapsulation vlan host1(config-if)#exit host1(config)#interface gigabitEthernet 7/0.1 host1(config-if)#vlan id 1 host1(config-if)#qos-parameter byteadjustment -16 host1(config-if)#qos-parameter cell-mode 1 host1(config-if)#ip address 1.1.1.1 255.255.255.0
