Skip to content

Support



Juniper was the first North American IP routing vendor to achieve the prestigious TL 9000 certification by the Quality of Excellence for Suppliers of Telecommunications (QuEST) Forum in the router category, for design, development, provision and service and support.



What is J-Care?

It's the world-class service and support that you expect from a company that delivers the industry's best infrastructure and security products. With J-Care, you now have the confidence knowing that Juniper will do our part to keep you on top of the world!


tx-connect-speed-method

Syntax

tx-connect-speed-method { static-layer2 | dynamic-layer2 | qos | actual }

no tx-connect-speed-method

Release Information

Command introduced in JUNOSe Release 8.0.0.

Description

Configures for an AAA domain map (when used from Domain Map Tunnel Configuration mode) or for an AAA tunnel group (when used from Tunnel Group Tunnel Configuration mode) the method used to calculate the transmit connect speed of the subscriber’s access interface for establishing a tunneled L2TP session. This speed is reported in L2TP Transmit (TX) Speed AVP 24. The no version removes configuration of the transmit connect speed calculation method from the AAA domain map or AAA tunnel group.

Options

  • static-layer2—Calculates the transmit connect speed of the subscriber’s access interface based on statically configured settings for the underlying layer 2 interface
  • dynamic-layer2—Calculates the transmit connect speed of the subscriber’s access interface based on dynamically configured settings for the underlying layer 2 interface
  • qos—Calculates the transmit connect speed of the subscriber’s access interface based on settings determined by QoS
  • actual—Calculates the transmit connect speed of the subscriber’s access interface as the lesser of the dynamic-layer2 value or the qos value

Mode

Domain Map Tunnel Configuration, Tunnel Group Tunnel Configuration

Published: 2010-01-07