Juniper was the first North American IP routing vendor to achieve the prestigious TL 9000 certification by the Quality of Excellence for Suppliers of Telecommunications (QuEST) Forum in the router category, for design, development, provision and service and support.

What is J-Care?

It's the world-class service and support that you expect from a company that delivers the industry's best infrastructure and security products. With J-Care, you now have the confidence knowing that Juniper will do our part to keep you on top of the world!

Downloads
mirror

Related Topics
Configuring CLI-Based Mirroring

mirror

Syntax

mirror triggerType triggerValue { ip | ipv6 | l2tp } secure-policy-list policyName

no mirror triggerType triggerValue { ip | ipv6 | l2tp }

Release Information

Command introduced before JUNOSe Release 7.1.0.
nas-port-id keyword added in JUNOSe Release 7.1.0.

IPv6 support added in JUNOSe Release 10.1.0.

Description

Enables packet mirroring based on the specified trigger and specifies the secure policy to attach to the subscriber's interface. The no version disables packet mirroring for the subscriber and removes the trigger configuration.

Options

triggerType—One of the following RADIUS attributes
- acct-session-id—Acct-Session-Id, RADIUS attribute [44]
- calling-station-id—Calling-Station-Id, RADIUS attribute [31]
- ip-address—Framed-IP-Address, RADIUS attribute [8]; associated with the virtual router where the command is issued, RADIUS VSA [26-1]
- nas-port-id—NAS-Port-Id, RADIUS attribute [87]
- username—User-Name, RADIUS attribute [1]; associated with the virtual router where the command is issued, RADIUS VSA [26-1]
triggerValue—Value of the triggerType (the specified RADIUS attribute) that identifies the subscriber
ip—Configures mirroring for an IP subscriber
ipv6—Configures mirroring for an IPv6 subscriber
l2tp—Configures mirroring for an L2TP subscriber
policyName—Secure policy to attach to the subscriber's interface

Mode

Global Configuration

Support