Index

Symbols

10-Gigabit Ethernet interfaces    

for E120 and E320 routers    1, 2, 3

10-Gigabit Ethernet modules    

specifying an interface    1, 2, 3, 4, 5, 6

802.3ad link aggregation    

E120 and E320 routers    1

A

AAA (authentication, authorization, accounting)    

sending ATM interface descriptions to    1

aaa commands    

aaa domain-map    1

aaa tunnel calling-number-format    1

aaa tunnel calling-number-format fallback    1

AAL (ATM Adaptation Layer)    1

AAL5 encapsulation types    1

AC-Cookie tag, PPPoE    1

AC-Name tag, PPPoE    1

accounting statistics    

terminated PPP session    1

address ranges    

VPI/VCI    1, 2

agent-circuit-identifier and dynamic VLAN subinterfaces    1, 2

aggregating T1 or E1 lines    1, 2

aggregation, Ethernet link    1

AIS (alarm indication signal) cells    1, 2

alarm indication signal cells.     See AIS cells    

ARP (Address Resolution Protocol) table    1

arp commands    

arp    1

ARP, Inverse    1

Asynchronous Transfer Mode.     See ATM    

ATM (Asynchronous Transfer Mode)    1, 2,  See also OAM, ATM    

AAL    1

AIS cells, handling    1

ATM passthrough    1

cable lengths    1

CAC    1

CC cells    1

cell scrambling payload    1

configuring    1, 2, 3, 4

dynamic interfaces    1

E120 and E320 routers    1, 2, 3, 4, 5, 6, 7, 8, 9

E320 routers    1, 2

fault management    1

ILMI    1

interface description    1

loopback cells, handling    1, 2

Martini encapsulation    1

module capabilities (statistics)    1

monitoring    1

OAM    1

oversubscription for dynamic interfaces    1, 2

overview    1

ping    

configuring    1

overview    1

platform considerations    1

PVCs    

configuring    1, 2

configuring individual parameters for    1

defining    1

RDI cells, handling    1

testing    1

VC classes    1

VC integrity    1

VCC-layer connectivity verification    1

ATM 1483 subinterfaces, dynamic    

assigning VC classes to    1, 2, 3

benefits of using    1

bulk configuration of VC ranges    1

changing VC subranges    1, 2

configuring    1

creating static ATM interfaces inVC subranges    1, 2

exporting descriptions    1

monitoring    1

overriding base profile assignments    1, 2

oversubscription    1, 2

overview    1

profiles for    1

restarting LCP negotiations for PPPoA clients    1

atm aal5 commands    

atm aal5 description    1

atm aal5 shutdown    1

atm aal5 snmp link-status    1

ATM Adaptation Layer.     See AAL    

atm atm1483 commands    

atm atm1483 advisory-rx-speed    1, 2, 3, 4

atm atm1483 auto-configure    1

atm atm1483 description    1, 2, 3

atm atm1483 export-subinterface-description    1

atm atm1483 mtu    1

atm atm1483 profile    1

atm atm1483 shutdown    1

atm atm1483 snmp trap link-status    1

atm atm1483 subscriber    1, 2

atm commands    1,  See also show atm commands    

atm auto-configuration    1

atm bulk-config    1, 2, 3, 4

atm bulk-config modify    1

atm bulk-config shutdown    1

atm cac    1

atm class-vc    1

atm clock internal    1

atm description    1

atm framing    1, 2

atm ilmi-enable    1

atm ilmi-keepalive    1, 2, 3

atm lbo    1, 2

atm oam    1

atm oam flush    1, 2, 3

atm oam loopback-location    1

atm pvc    1, 2, 3, 4, 5, 6, 7

atm shutdown    1

atm snmp trap link-status    1

atm sonet    1

atm sonet stm-1    1

atm uni-version    1, 2

atm vc-per-vp    1, 2, 3

atm vp-description    1

atm vp-tunnel    1, 2

monitor atm vc    1

monitor atm vp    1

ping atm interface atm    1

ATM VC Configuration mode    1

ATM virtual circuit (VC)    1

authentication    

EAP    1

MLPPP    1

PPP    1, 2, 3

subscribers on dynamic bridged Ethernet interfaces    1, 2, 3

auto-configure commands    

auto-configure    1, 2, 3, 4

auto-configure atm1483    1, 2

auto-configure vlan    1

autodetection of dynamic interfaces    1, 2

B

B-RAS applications, with PPP sessions    1

bandwidth    

SONET/SDH    1

base profiles    

VLAN subinterfaces    1

baseline commands    

baseline atm    1

baseline atm vp interface    1

baseline bridge    1

baseline bridge interface    1

baseline frame-relay    1

baseline frame-relay interface    1

baseline frame-relay multilinkinterface    1

baseline hdlc interface serial    1

baseline interface atm    1

baseline interface pos    1

baseline ppp (MLPPP)    1

baseline ppp interface    1

baseline pppoe interface    1

bridge commands    1,  See also clear bridge commands; show bridge commands; subscriber policy commands    

bridge    1

bridge acquire    1

bridge address    1

bridge aging time    1

bridge crb    1

bridge learn    1

bridge route    1

bridge snmp-trap link-status    1

bridge subscriber-policy    1

bridge-group    1

bridge groups    

configuring optional attributes    1

creating    1

defined    1

monitoring    1

bridge interfaces    

configuring    1

defined    1

monitoring    1

supported configurations    1

types of    1

bridge1483 commands    

bridge1483 mtu    1

bridge1483 service-profile    1

bridged Ethernet dynamic interfaces    1

authenticating subscribers    1, 2, 3

profile characteristics    1

bridged Ethernet static interfaces    1

application    1

backward compatible configuration    1

configuring    1

configuring for terminated traffic    1

configuring MTU size    1

configuring S-VLANs    1

configuring VLANs    1

E120 and E320 routers    1

MAC address validation    1

monitoring    1

platform considerations    1

terminating and routing traffic    1

VLAN and S-VLAN support    1

bridged IP    

configuring    1

E120 and E320 routers    1

overview    1

platform considerations    1

bridging, transparent    

concurrent routing and bridging    1, 2

configuration examples    

bridged Ethernet    1

VLANs    1

configuration tasks    1

configuring    

bridge groups and bridge interfaces    1, 2

optional bridge group attributes    1

routing    1

subscriber policies    1

creating bridge groups    1

E120 and E320 routers    1

MAC addresses    1, 2

monitoring    1

overview    1

platform considerations    1

prerequisites    1

references    1

setting statistics baselines    1

subscriber policies    1

unsupported features    1

broadcast command    1

bulk configuration of VC ranges    1

assigning VC classes    1, 2, 3

oversubscription    1, 2

restarting LCP negotiations for PPPoA clients    1

with CAC    1, 2

bulk configuration of VLAN ranges    1

bundle    

MLFR    1, 2

MLPPP    1, 2

C

cable length    

ATM interfaces    1

CAC (connection admission control) for ATM    

configuring    1, 2

overview    1

with bulk configuration    1, 2

Calling Number AVP    

descriptive format configuration    1

format configuration with agent ID suboptions    1

cbr command    1, 2

CE-side load balancing    1

CE1 line modules    

MLPPP features    1

cells    

AIS    1, 2

ATM    1

F4 OAM    1

fault management    1

handling of ATM loopback    1

loopback    1

RDI    1, 2

Challenge Handshake Authentication Protocol.     See CHAP    

channelized T1 interfaces    

MLPPP features    1

channelized T3 interfaces    

end-to-end fragmentation and reassembly    1

MLPPP features    1

CHAP (Challenge Handshake Authentication Protocol)    1

circuit ID, capturing for PPPoE    

configuring    1

dsl-forum-1 format and examples    1, 2

formatting    1, 2

monitoring    1

overview    1

sending to RADIUS or L2TP    1, 2

troubleshooting    1

using in profiles    1, 2

Cisco HDLC    

configuring    1

E120 and E320 routers    1

error frames    1

framing    1

line modules supported    1

monitoring    1

overview    1, 2

platform considerations    1

shutting down the interface    1

SLARP Address Resolution protocol    1

SLARP Keep-Alive protocol    1

SLARP keepalive interval    1

class-int command    1, 2

class-vc command    1

classes, VC    

assigning to    

ATM major interfaces    1

dynamic ATM 1483 subinterfaces    1, 2, 3

PVCs    1

static ATM 1483 subinterfaces    1

benefits    1

configuring    1

examples    

configuration    1

precedence levels    1

monitoring    1

overview    1

precedence levels    1

upgrade considerations    1

clear bridge commands    

clear bridge    1

clear bridge address    1

clear bridge interface    1

clock commands    

clock source    

POS interfaces    1

clock source, selecting    

ATM interfaces    1

POS interfaces    1

COCX-F3 line modules    

MLPPP features    1

cOCx/STMx interfaces    

end-to-end fragmentation and reassembly    1

MLPPP features    1

concurrent routing and bridging.     See CRB    

configuration examples    

ATM 1483 subinterfaces, dynamic    1

ATM VC classes    1, 2

bridged Ethernet, dynamic    1

bridged Ethernet, static    1

Cisco HDLC    1

IPoA, dynamic    1

MLFR    1

MLPPP, dynamic    1

MLPPP, static    1, 2

PPPoE, dynamic    1, 2

PPPoE, static    1, 2

profiles for dynamic interfaces    1

transparent bridging    1

VLAN subinterfaces, dynamic    1, 2

configure file command    1

configuring.     See specific feature, product, or protocol    

connection admission control.     See CAC for ATM    

connection types, ATM    

multipoint    1

point-to-point    1

control PVCs, creating    1

conventions    

notice icons    1

text and syntax    1

CRB (concurrent routing and bridging)    

bridge crb command    1

bridge route command    1

configuring routing    1

defined    1

enabling    1

crc command    1, 2

creating an IP profile    

tcp adjust-mss    1

CT3/T3-F0 line modules    

MLPPP features    1

customer support    1

contacting JTAC    1

D

data communication equipment.     See DCE    

data PVCs, creating    1

data terminal equipment.     See DTE    

data-link connection identifier.     See DLCI    

DCE (data communication equipment)    

configuring Frame Relay interface as    1, 2, 3

frame-relay lmi commands    1

show frame-relay lmi command    1, 2

debugging PPP and PPPoE dynamic interfaces    1

description, interface    

ATM 1483 subinterfaces, exporting    1

ATM interfaces    1

ATM virtual paths    1

Frame Relay interfaces    1

POS interfaces    1, 2

sending to AAA    1

serial interfaces    1

DHCP option 82 field    1

DHCP relay    

with bridged IP    1

digital subscriber line access multiplexers.     See DSLAMs    

Discovery protocol with PPPoE    1

DLCI (data-link connection identifier)    1, 2, 3

documentation set    

comments on    1

ds3-scramble command    1

dsl-forum-1 format for PPPoE remote circuit ID    1, 2

DSLAMs (digital subscriber line access multiplexers)    1

DTE (data terminal equipment)    

configuring Frame Relay interface as    1, 2, 3

frame-relay lmi command    1

show frame-relay lmi command    1, 2

dynamic encapsulation type lockout    1

benefits    1

configuring    1, 2, 3

for PPPoE clients    1

clearing lockout condition    1

configuring    1

differences from PPPoE over static ATM    1

monitoring    1, 2, 3, 4, 5

grace period    1

guidelines    1

Dynamic Host Configuration Protocol.     See DHCP relay    

dynamic interfaces    

ATM 1483 subinterfaces    1, 2

autodetection    1, 2

bridged Ethernet    1

authenticating subscribers    1, 2, 3

configuring from a profile    1, 2, 3

configuring from RADIUS    1

configuring IPoA    1

configuring PPP and PPPoE over ATM    1

restarting LCP negotiations    1

configuring PPPoE over static PPPoE    1

ATM interface columns    1

encapsulation type lockout    1

Ethernet and S-VLAN interface columns    1

Ethernet and VLAN interface columns    1

S-VLAN oversubscription    1, 2

static Ethernet interface columns    1

E120 and E320 routers    1, 2, 3

E320 routers    1, 2, 3

inserting dynamic IP routes intorouting table    1

monitoring    1, 2

oversubscription, ATM    1, 2

overview    1, 2

platform considerations    1, 2, 3

profiles, reassigning    1

RADIUS authentication    1, 2

troubleshooting    1

types supported    1, 2

VLAN subinterfaces    1

VLAN subinterfaces with agent-circuit-identifier information    1, 2

E

E120 and E320 routers    

10-Gigabit Ethernet interfaces    1, 2, 3

802.3ad link aggregation    1

ATM interfaces    1, 2, 3, 4, 5, 6, 7, 8, 9, 10

bridged IP interfaces    1

Cisco HDLC interfaces    1

dynamic interfaces    1, 2, 3

Gigabit Ethernet interfaces    1, 2, 3

POS interfaces    1, 2, 3, 4

PPP interfaces    1, 2

PPPoE interfaces    1, 2

transparent bridging    1

e3-scramble command    1

E320 routers    

ATM interfaces    1

bridged Ethernet    1

dynamic interfaces    1, 2, 3

POS interfaces    1

PPP interfaces    1

EAP (Extensible Authentication Protocol)    1

authentication methods    1

authentication negotiation    1

components    1

L2TP    1

limitations    1

MRU    1

MTU    1

performance    1

retransmission of packets    1

scalability    1

types    1

ECMP (equal-cost multipath)    

MLFR alternative to    1

MLPPP alternative to    1

enable commands    

enable    1

enabling LMI    1

encapsulation commands    

encapsulation    1, 2

encapsulation bridge1483    1, 2, 3

encapsulation frame-relay ietf    1, 2, 3

encapsulation hdlc    1

encapsulation mlframe-relay ietf    1

encapsulation mlppp    1, 2

encapsulation ppp    1, 2, 3, 4, 5, 6, 7

encapsulation pppoe    1, 2, 3

encapsulation vlan    1, 2, 3, 4

encapsulation method    

ATM interface    1, 2

Cisco HDLC interface    1

Frame Relay interface    1, 2, 3, 4, 5

encapsulation type lockout.     See dynamic encapsulation type lockout    

encapsulation, configuring for PVCs    1

end-to-end fragmentation and reassembly, Frame Relay    1

endpoint discriminator    

MLPPP    1

equal-cost multipath.     See ECMP    

error frames    

Frame Relay    1

PPP    1

ES2-S1 Service IOA    

MLPPP features    1

Ethernet interfaces    

CE-side load balancing    1

commands    1, 2,  See also show commands    

interface fastEthernet    1

interface lag    1

IEEE 802.1Q    1

IEEE 802.3ad    1

L2TP    1

link aggregation (LAG)    1

monitoring    1, 2, 3

MPLS    1, 2

multinetting    1

PPPoE over S-VLANs    1

PPPoE over VLANs    1, 2

S-VLANs    1, 2

subnetwork attachment point (SNAP)    1

VLANs    1

Ethernet link aggregation    

CE-side load balancing    1

configuring    1

enabling CE-side load balancing    1

IP interfaces    

example    1

MPLS    1, 2

MPLS over VLAN    1

overview    1, 2

PPPoE subinterfaces    1

example    1

VLAN subinterfaces    1

example    1

Ethernet link aggregation commands    

interface lag    1

lacp    1

lacp port-priority    1

member-interface    1

minimum-links    1

pppoe subinterface lag    1

Ethernet link redundancy    

configuration models    1

configuring    1

link behavior    1

overview    1

Ethernet link redundancy commands    

redundant-port    1

redundant-port force-failover    1

Ethertype value, assigning to S-VLANs    1, 2, 3, 4, 5, 6

example    1, 2

examples, configuration    

ATM 1483 subinterfaces, dynamic    1

ATM VC classes    1, 2

bridged Ethernet, dynamic    1

bridged Ethernet, static    1

Cisco HDLC    1

IPoA, dynamic    1

MLFR    1

MLPPP, dynamic    1

MLPPP, static    1, 2

PPPoE, dynamic    1, 2

PPPoE, static    1, 2

profiles for dynamic interfaces    1

transparent bridging    1

VLAN subinterfaces, dynamic    1, 2

exporting ATM 1483 subinterface descriptions    1

Extensible Authentication Protocol.     See EAP    

external loopback    1

F

F4 OAM cells, for ATM    1

configuring    1

handling of received cells    1

F5 OAM cells, for ATM    

configuring    1, 2

disabling automatically    1, 2, 3, 4, 5

handling of received cells    1

Fast Ethernet interfaces    

specifying an interface    1

Fast Ethernet modules    

configuring PPPoE    1

specifying an interface    1, 2, 3, 4

fault management, ATM    1

flush, ATM OAM    1

fragmentation    

Frame Relay packets    1

MLPPP    

configuring dynamic    1

configuring static    1

overview    1

Frame Relay    

configuring    1

disabling interface    1

end-to-end fragmentation and reassembly    1

configuring    1

error frames    1

framing    1

interconnection and relationship of NNIs and subnetworks    1

map class    1

maximum payload size    1

monitoring    1

multicast addressing    1

Network-to-Network Interface    1

overview    1

platform considerations    1

SNMP link status processing    1

unicast addressing    1

User-to-Network Interface    1

frame-relay commands    1,  See also show frame-relay commands    

frame-relay class    1

frame-relay description    1

frame-relay fragment    1

frame-relay interface-dlci ietf    1, 2

frame-relay intf-type    1

frame-relay keepalive    1

frame-relay lmi-n391dte    1

frame-relay lmi-n392dce    1

frame-relay lmi-n392dte    1

frame-relay lmi-n393dce    1

frame-relay lmi-n393dte    1

frame-relay lmi-t391dte    1

frame-relay lmi-t392dce    1

frame-relay lmi-type    1

map-class frame-relay    1

framing    

ATM interfaces    1

capabilities of E Series routers    1, 2, 3

POS interfaces    1

G

Gigabit Ethernet interfaces for E120 and E320 routers    1, 2, 3

Gigabit Ethernet modules    

configuring MLPPP    1

configuring PPPoE    1

specifying an interface    1, 2, 3, 4, 5, 6

grace period, dynamic encapsulation type lockout    1

group (multicast) addressing    1

groups, bridge.     See bridge groups    

H

hash-based packet distribution with MLPPP    1

HDLC (High-Level Data Link Control), Cisco.     See Cisco HDLC    

HDLC (High-Speed Data Link Control)    

PPP framing    1

serial encapsulation    1

hdlc commands    

hdlc down-when-looped    1

hdlc keepalive    1

hdlc shutdown    1

high availability    

and atm atm1483 subscriber command    1

and subscriber command    1, 2, 3

High-Level Data Link Control.     See Cisco HDLC    

High-Speed Data Link Control.     See HDLC    

higher-level protocols over Ethernet    

platform considerations    1

I

IEEE 802.1Q    1

IEEE 802.1w    1

IEEE 802.1w (Rapid Reconfiguration of Spanning Tree)    1

IEEE 802.3ad    1

IEEE 802.3ad (Link Aggregation)    1

ILMI    1

ILMI (integrated local management interface)    

about    1

enabling    1

keepalive timer    1

inarp command    1, 2

individual (unicast) addressing    1

integrated local management interface.     See ILMI    

interface commands    

interface atm    1, 2, 3, 4, 5, 6, 7, 8, 9

interface fastEthernet    1, 2, 3, 4, 5, 6

interface gigabitEthernet    1, 2, 3, 4, 5, 6

interface lag    1

interface mlframe-relay    1

interface mlppp    1, 2

interface pos    1, 2, 3, 4

interface serial    1

Cisco HDLC interfaces    1

Frame Relay interfaces    1, 2

PPPoE interfaces    1

interface tenGigabitEthernet    1, 2, 3, 4, 5, 6

interface description    

Frame Relay interfaces    1

POS interfaces    1, 2

serial interfaces    1

interfaces    

10-Gigabit Ethernet    1, 2, 3, 4, 5, 6

bridge.     See bridge interfaces    

Fast Ethernet    1, 2, 3, 4

Gigabit Ethernet    1, 2, 3, 4, 5, 6

serial.     See serial interfaces    

interfaces, monitoring    

Ethernet    1, 2, 3

internal loopback    1

International Telecommunication Union.     See ITU    

Internet Protocol Control Protocol.     See IPCP    

Inverse ARP    1

IP addresses    

assigning to Cisco HDLC interfaces    1

assigning to Frame Relay subinterfaces    1, 2

assigning to PPP interface    1

PPPoE interfaces    1, 2, 3

ip commands    

ip (subscriber policies)    1

ip access-routes    1

ip address    1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11

ip auto-configure ip-subscriber    1

ip auto-detect ip-subscriber    1

ip directed-broadcast    1

ip filter-options all    1

ip igmp    1

ip ignore-df-bit    1

ip inactivity-timer    1

ip mac-validate    1

ip mtu    1

ip nat    1

ip policy    1

ip redirects    1

ip route-map ip-subscriber    1

ip sa-validate    1

ip tcp adjust-mss    1

ip unnumbered    1, 2

ip virtual-router    1

IP over ATM.     See IPoA    

IP over VLAN over bridged Ethernet    1

IP profile    1

IP routes, inserting dynamic routes intorouting table    1

IPCP (Internet Protocol Control Protocol)    

option 0x90    1

overview    1

IPoA (IP over ATM)    

configuring dynamic interfaces    1

dynamic interfaces    1, 2

IPv4 and IPv6 over Static PPPoE    

IPv4 and IPv6 interface columns    1

IPv6    

neighbor discovery, defining    1

ipv6 commands    

ipv6 address    1

ipv6 mld    1

ipv6 mtu    1

ipv6 nd    1

ipv6 nd managed-config-flag    1

ipv6 nd other-config-flag    1

ipv6 nd prefix-advertisement    1

ipv6 nd ra-interval    1, 2

ipv6 nd reachable-time    1

ipv6 nd suppress-ra    1

ipv6 policy    1

ipv6 sa-validate    1

ipv6 unnumbered    1

ipv6 virtual-router    1

IPv6 neighbor discovery commands    

ipv6 nd reachable-time    1

IPv6 profile    1

ITU (International Telecommunication Union) recommendation, ATM OAM standards    1

J

J-Flow commands    

ip route-cache flow sampled    1

K

keepalive timer, setting    1

L

L2TP (Layer 2 Tunneling Protocol)    1

profile characteristics    1

using PPPoE remote circuit ID    1, 2

l2tp commands    

l2tp policy    1

L2TP Proxy Authenticate Extensions for EAP—draft-ietf-l2tpext-proxy-authen-ext-eap-01.txt (December 2006 expiration)    1

LACP (Link Aggregation Control Protocol)    1

PPPoE subinterfaces    1, 2

redundant member link behavior    1

layer 2 services over MPLS    

802.3ad link aggregation    1

802.3ad switch    1

Layer 2 Tunneling Protocol.     See L2TP    

LCP (Link Control Protocol)    

configuration options    1, 2

endpoint discriminator    1

MRRU    1

SSN header format    1

restarting negotiations for PPPoA clients    1

Link Control Protocol.     See LCP    

Link Integrity Protocol.     See LIP    

LIP (Link Integrity Protocol)    1

LMI (local management interface)    

configuring counters and timers    1

configuring type    1

enabling    1

monitoring    1, 2, 3

load-interval command    

ATM interfaces    1

POS interfaces    1

local management interface.     See LMI;ILMI    

lockout, encapsulation type.     See dynamic encapsulation type lockout    

log severity debug command    1, 2

loopback    

detection on Cisco HDLC interfaces    1

loopback command    

ATM interfaces    1

POS interfaces    1

loopback for ATM VC integrity    

cells    1

configuring    1, 2

F4 OAM cells    1

handling of received cells    1

M

MAC (media access control) addresses    

bridging overview    1

configuring for S-VLANs    1, 2

configuring for VLANs    1

removing from forwarding table    1

using with bridged Ethernet    1

validation on bridged Ethernet interfaces    1

macro command    1

macros    

using to configure dynamic interfaces    1

magic numbers    1

manuals    

comments on    1

map class, Frame Relay fragmentation    1

map entries, Frame Relay    1, 2

map list, using to configure NBMA interfaces    1

map-class frame-relay command    1

map-group command    1

map-list command    1

maximum payload size, Frame Relayfragmentation    1

maximum receive unit.     See MRU    

media access control addresses     See MAC addresses    

member-interface command    1, 2, 3

message of the minute messages.     See MOTM messages    

MFR    

aggregating OC3/STM1 lines    1

MLFR (Multilink Frame Relay)    

aggregating T1 or E1 lines    1

aggregation limits    1

bundle    1, 2

bundle limits    1

configuring    1

interfaces, monitoring    1

Link Integrity Protocol    1

member link sequence numbers    1

NxT1 service    1

overview    1

packet distribution, round-robin    1

platform considerations    1

protocol layering    1

unsupported features    1

MLP.     See MLPPP    

MLPPP (Multilink PPP)    1,  See also ppp commands    

aggregating T1 or E1 lines    1

aggregation limits    1

authentication    1

bundle    1, 2

bundle limits    1

bundle name and RADIUS    1

commands, contextual differences of    1

configuring    1

ECMP    1

encapsulation    1

endpoint discriminator    1

features    1

fragmentation    

configuring dynamic    1

configuring static    1

overview    1

interface stacking    1

interfaces, monitoring    1

member link sequence numbers    1

MRRU    1

NxT1 service    1

overview    1

packet distribution    1

platform considerations    1

profiles    1

protocol layering    1

reassembly    

configuring dynamic    1

configuring static    1

overview    1

SSN header format    1

statistics and baselining    1

unsupported features    1

modules    

ATM capabilities    1

monitor commands    

monitor atm vc    1

monitor atm vp    1

monitor vlan interface    1

monitoring.     See specific feature, product, or protocol    

MOTM (message of the minute) messages    1

MP.     See MLPPP    

MPLS (Multiprotocol Label Switching)    

configuring over Ethernet link aggregation    1

configuring S-VLAN tunnels    1, 2

mpls commands    

mpls    1, 2

mpls (subscriber policies)    1

mpls atm vci range    1

mpls-relay    1

MPLS over VLAN over bridged Ethernet    1

MRRU LCP configuration option    1

MRU (maximum receive unit)    

POS interfaces    1

PPP interfaces    1, 2

mru command    1

MTU (maximum transmission unit)     See MTU    

bridged Ethernet interfaces    1

Ethernet interfaces    1

POS interfaces    1

mtu command    1

Ethernet interfaces    1, 2

multicast addressing    1

multicast command    1

Multilink Frame Relay.     See MLFR    

multilink maximum received reconstructed unit (MRRU)    1

Multilink PPP.     See MLPPP    

multinetting    1

multipoint, ATM connections    1, 2

N

NBMA    1

NBMA (nonbroadcast multiaccess)    1

configuring    1

description    1

Inverse ARP    1

point-to-multipoint    1

removing circuits    1

static mapping    1

nested profile assignments    

VLAN subinterfaces    1

NNI (Network-to-Network Interface),Frame Relay    1, 2, 3

nonbroadcast multiaccess.     See NBMA    

notice icons    1

NxT1 service    

MLFR    1

MLPPP    1

O

OAM (Operation, Administration, and Management), ATM    1

cc (continuity check) cells    1

configuring    1, 2

disabling F5 OAM services    1, 2, 3, 4, 5

flush    1

standards    1

oam commands    

oam ais-rdi    1, 2

oam cc    1, 2

oam retry    1, 2

oam-pvc    1, 2

OC3 modules    

monitoring ATM interfaces    1

testing ATM interfaces    1

OCx/STMx interfaces    

MLPPP features    1

Operation, Administration, and Management.     See OAM, ATM    

option 82 field, DHCP    1

OSI Network Layer Control Protocol.     See OSINLCP    

OSINLCP (OSI Network Layer Control Protocol)    1

overriding base profile assignments    

assigning to PVC    1

monitoring    1, 2

overview    1, 2

removing from PVC    1

removing from VC range or subrange    1

removing from VLAN range or subrange    1

removing from VLAN subinterface    1

VLANs    1

oversubscription    

dynamic ATM interfaces    1, 2

S-VLANs    1

P

packet logging, PPP and PPPoE    1

packet over SONET.     See POS    

PADM (PPPoE Active Discovery Message), configuring    1

PADN (PPPoE Active Discovery Network) messages, configuring    1

padn command    1

PADS (PPPoE Active Discovery Session) packets, configuring    1

PAP (Password Authentication Protocol)    1

Password Authentication Protocol.     See PAP    

payload, ATM cell    1

PCR (peak cell rate)    1

permanent virtual circuit.     See PVC    

ping atm interface atm command    1

ping, ATM    

configuring    1

overview    1

platform considerations    

ATM    1

bridged Ethernet    1

bridged IP    1

Cisco HDLC    1

dynamic interfaces    1, 2, 3

Ethernet interfaces    1

Frame Relay    1

higher-level protocols over Ethernet    1

MLFR    1

MLPPP    1

POS    1

PPP    1

PPPoE    1

transparent bridging    1

point-to-multipoint, NBMA connection    1

Point-to-Point Protocol over ATM.     See PPPoA    

Point-to-Point Protocol over Ethernet.     See PPPoE    

Point-to-Point Protocol.     See PPP    

policies, subscriber.     See subscriber policies for transparent bridging    

policy commands    

atm policy    1, 2

frame-relay policy    1, 2

gre-tunnel policy    1, 2

ip policy    1

l2tp policy    1, 2

mpls policy    1, 2

vlan policy    1, 2

policy management    

baselining statistics    1

preserving statistics    1

statistics    1

POS (packet over SONET)    

configuring interface    1

disabling interface    1

E120 and E320 routers    1, 2, 3, 4

E320 routers    1

line modules supported    1

monitoring interface    1

overview    1

platform considerations    1

references    1

pos commands    

pos description    1, 2, 3

pos framing    1

pos scramble-atm    1

PPP (Point-to-Point Protocol)    

accounting statistics for terminated sessions    1

Async-Control-Character-Map (ACCM) option    1

authentication    1, 2, 3

configuring    1

configuring dynamic interfaces    1

E120 and E320 routers    1, 2

E320 routers    1

EAP    1

Extensible Authentication Protocol    1

interfaces    1

magic numbers    1

monitoring interfaces    1

network control protocol    1

packet logging    1

platform considerations    1

PPP profiles    1

troubleshooting    

dynamic interfaces    1

static interfaces    1

ppp commands    1,  See also show ppp commands    

ppp aaa-profile    1

ppp authentication    1, 2, 3

ppp chap-challenge-length    1, 2

ppp description    1

ppp fragmentation    1, 2

ppp hash-link-selection (MLPPP)    1, 2

ppp initiate-ip    1

ppp initiate-ipv6    1

ppp ipcp netmask    1

ppp keepalive    1, 2

ppp keepalive (MLPPP)    1

ppp log    1, 2

ppp log (MLPPP)    1

ppp magic-number disable    1, 2

ppp magic-number disable (MLPPP)    1

ppp magic-number ignore-mismatch    1, 2, 3

ppp max-bad-auth    1

ppp max-bad-auth (MLPPP)    1

ppp max-negotiations    1, 2, 3

ppp mru    1, 2, 3

ppp multilink enable (MLPPP)    1, 2, 3

ppp passive-mode    1, 2

ppp passive-mode (MLPPP)    1

ppp peer    1, 2, 3

ppp peer (MLPPP)    1

ppp reassembly    1, 2

ppp shutdown    1

ppp shutdown (MLPPP)    1

ppp shutdown ip    1

ppp shutdown mpls    1

ppp shutdown osi    1

PPP Multilink.     See MLPPP    

PPPoA (Point-to-Point Protocol over ATM)    

terminating stale subscribers and restarting LCP negotiations    1

PPPoE    1

PPPoE (Point-to-Point Protocol over Ethernet)    

Active Discovery Initiation (PADI) packets    1

Active Discovery Message (PADM)    1

Active Discovery Network (PADN) messages    1

Active Discovery Offer (PADO) packets    1

Active Discovery Request (PADR) packets    1

Active Discovery Session (PADS) packets    1, 2

agent-circuit-identifier information    1

capturing remote circuit ID    

configuring    1

dsl-forum-1 format and examples    1, 2

formatting    1, 2

monitoring    1

overview    1

sending to RADIUS or L2TP    1, 2

troubleshooting    1

using in profiles    1, 2

configuring dynamic interfaces over ATM    1

configuring dynamic interfaces over PPPoE    1

configuring for Ethernet    1, 2

configuring over ATM    1

Discovery protocol    1

DSL Forum VSA 26-1    1

dynamic encapsulation type lockout    1

clearing lockout condition    1

configuring    1

differences from PPPoE over static ATM    1

monitoring    1, 2, 3, 4, 5

E120 and E320 routers    1, 2

monitoring interfaces    1

overview    1

packet logging    1

platform considerations    1

subinterfaces for LACP    1, 2

troubleshooting    

dynamic interfaces    1

static interfaces    1

pppoe commands    1,  See also show pppoe commands    

encapsulation pppoe    1

pppoe    1, 2, 3, 4

pppoe (subscriber policies)    1

pppoe acname    1, 2, 3

pppoe always-offer    1

pppoe auto-configure    1

pppoe auto-configure lockout-time    1

pppoe clear lockout interface    1

pppoe duplicate-protection    1, 2, 3

pppoe log pppoeControlPacket    1

pppoe motm    1, 2, 3, 4

pppoe pads disable-ac-info    1

pppoe profile    1

pppoe remote-circuit-id    1, 2

pppoe service-name-table    1, 2, 3, 4

pppoe sessions    1, 2

pppoe subinterface    1, 2, 3

pppoe subinterface fastEthernet    1

pppoe subinterface gigabitEthernet    1

pppoe subinterface lag    1

pppoe subinterface tenGigabitEthernet    1

pppoe url    1, 2, 3

service    1

PPPoE over S-VLAN over bridged Ethernet    1

PPPoE over VLAN over bridged Ethernet    1

PPPoE service name tables    

action, defined    1

configuring    1

creating and populating    1

enabling for dynamic interfaces    1

enabling for static interfaces    1

Ethernet configurations    1

overview    1

service name tag, defined    1

precedence levels for VC classes    

examples    1

overview    1

privilege level    

for troubleshooting dynamic interfaces    1, 2

profile commands    1,  See also show profile commands    

profile    1, 2, 3, 4, 5, 6, 7, 8, 9

profile atm1483 bulk-config-name    1, 2

profile atm1483 bulk-config-name pvc    1

profile vlan bulk-config    1

profile vlan override    1

profile-reassign    1, 2, 3

vlan profile    1, 2

vlan service-profile    1

profiles    

assigning to a static interface    1

assigning to an interface    1

characteristics for    1

creating for debugging    1

description    1, 2

for dynamic ATM 1483 subinterfaces    1

for dynamic VLAN subinterfaces    1

monitoring    1, 2

overriding base profile assignments    1, 2, 3, 4

reassigning for troubleshooting    1

using to configure dynamic interfaces    1

working with    1

proxy ARP    1

PVC (permanent virtual circuit)    

assigning VC classes    1

ATM interfaces    1, 2, 3

bulk configuration of    1

configuring encapsulation    1

configuring F5 OAM    1

configuring for bridged IP    1

configuring individual parameters for    1

configuring Inverse ARP    1

configuring service category    1

creating control PVCs    1

creating data PVCs    1

Frame Relay    1, 2, 3, 4

overview    1

pvc command    

for control PVCs    1

for data PVCs    1

R

RADIUS (Remote Authentication Dial-In User Service)    

authentication of dynamic interfaces    1, 2, 3

configuring dynamic interfaces from    1

MLPPP Bundle Name VSA    1

overriding attributes for PPPoE    1, 2

using PPPoE remote circuit ID    1, 2

radius commands    

radius override calling-station-idremote-circuit-id    1

radius override nas-port-id remote-circuit-id    1

radius remote-circuit-id-delimiter    1, 2

radius remote-circuit-id-format    1, 2

radius remote-circuit-id-format (dsl-forum-1 keyword)    1, 2

ranges, VC.     See VC ranges, bulk configuration of    

ranges, VLAN     See VLAN ranges, bulk configuration of RDI (remote defect indication) cells    

RDI (remote defect indication) cells    1, 2

reassembly    

Frame Relay packets    1

MLPPP    

configuring dynamic    1

configuring static    1

overview    1

reassigning profiles to dynamic interfaces    1

relearn command    1

remote circuit ID, capturing for PPPoE    

configuring    1

dsl-forum-1 format and examples    1, 2

formatting    1, 2

monitoring    1

overview    1

sending to RADIUS or L2TP    1, 2

troubleshooting    1

using in profiles    1, 2

remote defect indication cells.     See RDI cells    

round-robin packet distribution with MLPPP    1

route interface command    1

routing, configuring for transparent bridging    1

RSTP (Rapid Spanning Tree Protocol)    1

Ethernet link redundancy    1, 2

S

S-VLANs (stacked virtual local area networks)    

address possibilities    1

bridged Ethernet configurations    1

configuring PPPoE over S-VLAN    1

configuring to support dynamic PPPoE    1

configuring tunnel interfaces    

advantages    1

example    1

interface stacking    1

displaying status    1, 2

oversubscription    1

overview    1

PPPoE over S-VLAN over bridged Ethernet    1

scrambling ATM cell payload    1

scripts    

using to configure dynamic interfaces    1

SDH (Synchronous Digital Hierarchy)    1, 2

serial description command    1

serial interfaces    

configuring    1, 2, 3, 4, 5

Serial Line Address Resolution Protocol.     See SLARP    

service category, configuring for PVCs    1

service name tables, PPPoE.     See PPPoE service name tables    

SFPs (small form-factor pluggable transceivers)    1, 2

short sequence number (SSN) header format    1

show aaa commands    

show aaa tunnel-parameters    1

show atm commands    

show atm aal5 interface    1, 2, 3

show atm atm1483    1

show atm bulk-config    1

show atm interface    1

show atm map    1, 2

show atm oam    1

show atm ping    1

show atm subinterface    1, 2, 3, 4

show atm vc    1, 2, 3

show atm vc atm    1

show atm vc-class    1

show atm vp    1

show atm vp-description    1

show atm vp-tunnel    1, 2, 3, 4

show nbma arp    1

show bridge commands    

show bridge    1

show bridge groups    1

show bridge interface    1

show bridge port    1

show bridge table    1

show bridge1483 interface command    1

show columns command    1, 2

show frame-relay commands    

show frame-relay interface    1, 2

show frame-relay lip    1

show frame-relay lmi    1, 2

show frame-relay map    1, 2

show frame-relay multilinkInterface    1

show frame-relay pvc    1, 2

show frame-relay subinterface    1, 2

show frame-relay summary    1, 2

show hdlc interface command    1

show interfaces commands    

show interfaces fastEthernet    1, 2

show interfaces gigabitEthernet    1, 2

show interfaces lag    1

show interfaces lag members    1

show interfaces pos    1

show interfaces tenGigabitEthernet    1, 2

show ip mac-validate command    1

show mpls cross-connects atm command    1

show ppp commands    

show ppp interface    1

show ppp interface mlppp    1

show ppp interface summary    1, 2

show pppoe commands    

show pppoe interface    1, 2, 3

show pppoe interface lockout-time    1, 2

show pppoe interface summary    1

show pppoe subinterface    1, 2, 3

show pppoe subinterface summary    1

show profile commands    

show profile    1, 2, 3

show radius commands    

show radius override    1

show radius remote-circuit-id-delimiter    1

show radius remote-circuit-id-format    1

show subscriber-policy command    1

show vlan commands    

show vlan bulk-config    1

show vlan subinterface    1, 2, 3

show vlan subinterface command    1

shutdown command    1

dynamic interfaces    1, 2

Frame Relay    1

POS    1

shutting down interfaces    

dynamic ATM 1483    1

dynamic VLAN    1

Frame Relay    1

POS    1

Simple Network Management Protocol.     See SNMP link status processing    

SLARP (Serial Line Address Resolution Protocol)    1,  See also Cisco HDLC    

Keep-Alive protocol    1

keepalive interval    1

overview    1

SMs (Service modules)    

MLPPP features    1

SNAP (subnetwork attachment point)    1

SNMP (Simple Network Management Protocol) link status processing    1

snmp trap frame-relay link-status command    1

SONET (Synchronous Optical Network)    1, 2, 3

source, clock    

ATM interfaces    1

SSN LCP (short sequence number Link Control Protocol) configuration option    1

stacked virtual local area networks.     See S-VLANs    

stateful SRP switchover    

and atm atm1483 subscriber command    1

and subscriber command    1, 2, 3

static interfaces    1, 2

creating in VC subranges    1, 2

creating in VLAN subranges    1

static mapping, and NBMA interfaces    1

subinterfaces    

ATM 1483, dynamic    1

ATM 1483, static    1

Frame Relay, monitoring    1

MLFR, monitoring    1

VLAN, dynamic    1

subnet mask    

assigning to PPP interface    1

subnetwork attachment point.     See SNAP    

subranges, VC.     See VC subranges    

subscriber command    1, 2, 3, 4, 5, 6, 7, 8, 9

subscriber management, using for subscriber authentication    1, 2

subscriber policies for transparent bridging    1,  See also subscriber policy commands    

configuring    1

defined    1

monitoring    1

subscriber policy commands    1

arp    1

bridge subscriber-policy    1

broadcast    1

ip    1

multicast    1

pppoe    1

relearn    1

show subscriber-policy    1

subscriber-policy    1

unicast    1

unknown-destination    1

unknown-protocol    1

subscribers    

authenticating on dynamic bridged Ethernet interfaces    1, 2, 3

identifying for PPPoE    1

support, technical     See technical support    

SVC (switched virtual circuit)    

ATM    1

Frame Relay    1, 2

svlan commands    

svlan ethertype    1, 2, 3, 4, 5, 6

svlan id    1

for S-VLAN tunnels    1

for standard S-VLANs    1, 2

switch, 802.3ad    1

switched virtual circuit.     See SVC    

Synchronous Digital Hierarchy.     See SDH    

Synchronous Optical Network.     See SONET    

system    

framing capabilities    1

system clock    

selecting clock source    1

T

technical support    

contacting JTAC    1

terminated PPP session accounting statistics    1

text and syntax conventions    1

traffic management, ATM    

types    1

traffic-shaping parameters    1

transmit clock source, configuring    

ATM interfaces    1

transparent bridging.     See bridging, transparent    

troubleshooting interfaces    

dynamic PPP and PPPoE    1

PPP    1

PPPoE    1, 2

TSMs (Tunnel Service modules)    

MLPPP features    1

U

ubr command    1, 2

UNI (User-Network Interface) version    1, 2, 3, 4, 5

unicast addressing    1

unicast command    1

Uniform Resource Locator messages.     See URL messages    

unknown- commands    

unknown-destination    1

unknown-protocol    1

URL (Uniform Resource Locator) messages    1

User-Network Interface.     See UNI version    

V

vbr commands    

vbr-nrt    1, 2

vbr-rt    1, 2

VC (virtual channel)    

integrity    1

per port, ATM    1

VC (virtual circuit), monitoring    1

VC classes    

assigning to    

ATM major interfaces    1

dynamic ATM 1483 subinterfaces    1, 2, 3

PVCs    1

static ATM 1483 subinterfaces    1

benefits    1

configuring    1

examples    

configuration    1

precedence levels    1

monitoring    1

overview    1

precedence levels    1

upgrade considerations    1

VC ranges, bulk configuration of    

assigning VC classes    1, 2, 3

example    1

oversubscription    1, 2

overview    1

restarting LCP negotiations for PPPoA clients    1

VC subranges    

changing    

adding to VC range    1

changing administrative state    1

configuring    1

merging    1

monitoring    1

overview    1

removing from VC range    1

shortening or expanding    1

creating static ATM interfaces in    

configuring    1

monitoring    1

overview    1

overriding profile assignments    1, 2

oversubscription    1, 2

vc-class atm command    1

VCC (virtual channel connection)    1

VCD (virtual circuit descriptor)    1, 2

VCI (virtual channel identifier)    1, 2, 3

vendor-specific attributes.     See VSAs    

versions    

UNI (User-Network Interface)    1, 2

virtual channel connection.     See VCC    

virtual channel identifier.     See VCI    

virtual channel.     See VC    

virtual circuit descriptor.     See VCD    

virtual circuit.     See VC, monitoring    

virtual connections, ATM    1

virtual local area networks.     See VLANs    

IPv4 and IPv6 over Dynamic PPPoE    1

virtual path connection.     See VPC    

virtual path descriptions, assigning    1

virtual path identifier.     See VPI    

virtual path tunnels.     See VP tunnels, ATM    

virtual path.     See VP, monitoring    

virtual-router command    1

vlan commands    

encapsulation vlan    1

monitor vlan interface    1

profile vlan override    1

vlan advisory-rx-speed    1, 2

vlan advisory-tx-speed    1, 2

vlan auto-configure    1, 2

vlan auto-configure agent-circuit-identifier    1, 2

vlan bulk-config    1, 2, 3

vlan bulk-config modify    1

vlan bulk-config shutdown    1

vlan description    1, 2

vlan id    1, 2

vlan profile    1, 2

vlan service-profile    1

VLAN subinterfaces    

base profiles    1

nested profile assignments    1

overriding profile assignments    1

VLAN subinterfaces, dynamic    

benefits of using    1

bulk configuration of VLAN ranges    1

changing VLAN subranges    1, 2

configuring    1

configuring with agent-circuit-identifier information    1, 2

creating static VLAN interfaces in VLAN subranges    1

monitoring    1

overriding base profile assignments    1

overview    1

profiles for    1

VLAN subranges    

changing    

adding to VLAN range    1

changing administrative state    1

configuring    1

merging    1

monitoring    1

overview    1

removing from VLAN range    1

shortening or expanding    1

creating static VLAN interfaces in    

configuring    1

monitoring    1

VLANs (virtual local area networks)    

bridged Ethernet configurations    1

configuring    1

configuring dynamic subinterfaces for    1

configuring for dynamic IP    1

configuring for dynamic PPPoE    1

configuring IPv4 and IPv6 over dynamic PPPoE    1

configuring to support dynamic PPPoE    1

displaying status    1, 2

IP over VLAN over bridged Ethernet    1

monitoring    1

MPLS over VLAN over bridged Ethernet    1

overview    1

PPPoE over VLAN over bridged Ethernet    1

VP (virtual path) tunnels, ATM    

overview    1

per module assembly    1

traffic rate    1

VP (virtual path), monitoring    1

VPC (virtual path connection)    1

VPI (virtual path identifier)    1, 2, 3

VSAs (vendor-specific attributes)    

DSL Forum 26-1    1

levels of CLI access    1

MLPPP Bundle Name    1

X

X.21/V.35 interfaces    

MLPPP features    1

XFPs (10-gigabit small form-factor pluggable transceivers)    1