Index
Symbols
- 10-Gbps SRP module 1
- 10/100Base-T port 1, 2, 3
- –48 VDC 1
A
- access line modules 1
- access, management 1, 2
- setting up console 1, 2
- SNMP 1, 2
- Telnet setup 1
- accessing fan tray 1
- agency certification 1, 2, 3, 4
- air filter
- replacing 1
- airflow 1
- rack-mounted installation and 1
- specifications 1, 2, 3
- alarm ports 1
- amperage 1, 2, 3
- antistatic bags and containers 1
- assembly numbers, locating 1
- assigning an IP address 1
B
- BNC connector 1, 2
- booting
- LED activity 1
C
- cable-management bracket 1
- installing 1
- cables
- failure 1
- I/O modules 1
- pinouts 1
- power input module 1
- recommendations 1
- redundant port 1
- required 1
- SRP I/O modules 1, 2
- cabling
- ERX routers 1
- HSSI connectors 1
- RJ-45 connectors 1, 2
- SC duplex connectors 1, 2
- SRP I/O modules 1, 2
- X.21/V.35 connectors 1
- Case Manager 1
- certifications 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12
- circulation, air 1
- classification, packet 1
- cleaning 1
- CLI (command-line interface) 1
- clock source input ports 1
- clocking problems 1
- color code, power cable 1
- combinations of line modules 1
- command-line interface 1
- compliance
- product reclamation and recycling 1
- requirements 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12
- components
- returning 1
- storing 1
- configuring cables 1, 2
- configuring management access 1
- configuring Telnet 1
- connecting console to router 1
- connectors, pinouts 1
- console
- for management access 1, 2
- ports
- RS-232 1, 2
- consumption, power 1, 2, 3, 4
- conventions
- notice icons 1
- text and syntax 1
- current (electrical) requirements 1, 2, 3
- customer support 1, 2
- contacting JTAC 1
D
- DB-9 connector 1, 2, 3, 4, 5
- DC power 1, 2
- detecting double-bit error 1
- Device Management System, NMC-RX 1
- diagnosing problems 1
- diagnostic LEDs 1
- dimensions of ERX routers 1, 2, 3
- dissipation, heat 1, 2, 3
- distribution rack 1
- documentation set
- comments on 1
- double-bit errors
- detecting 1
- troubleshooting 1
E
- E Series routers
- assigning IP address to 1
- cabling 1
- cabling recommendations 1
- dimensions 1, 2, 3
- electrical requirements 1, 2, 3
- hardware 1
- installing 1, 2
- installing components 1
- installing modules 1
- lifting 1, 2
- maintenance 1
- management access 1, 2
- models 1
- modules 1
- power requirements 1, 2, 3
- powering down 1
- powering up 1
- safety guidelines 1, 2, 3
- site planning 1
- slot groups and identification 1
- space requirements 1
- troubleshooting 1, 2
- EIA distribution rack 1
- ejectors, module 1
- electrical requirements 1, 2, 3, 4
- electronic equipment, recycling 1
- environmental requirements 1
- ERX14xx models 1, 2
- fan tray 1
- front view 1
- rear view 1
- ERX310 Broadband Services Router
- front view 1
- power cord warnings 1
- rear view (AC model) 1
- rear view (DC model) 1
- ERX310 router
- fan tray 1
- ERX705 router 1
- ERX7xx models 1, 2
- fan tray 1
- front view 1
- rear view 1
- slot identification and grouping 1
- ESD (electrostatic discharge) 1
- ESD grounding jack, chassis 1
- Ethernet link 1
- external timing ports 1
F
- failure, fan 1
- failures 1
- FAN FAIL LED 1
- FAN OK LED 1
- fan tray 1
- hot-swapping 1
- fans
- failure 1, 2
- installing 1
- location 1
- redundancy 1
- removing 1
- status 1
- far-end receive failure 1
- FERF (far end receive failure) 1
- filler panel 1
- filter, air 1
- Flash cards 1
- flow, air 1
G
- grounding jack, ESD 1
H
- halt command 1, 2
- hardware
- cable configuration 1, 2
- reclamation and recycling 1
- redundancy features 1
- repairing and replacing 1
- hazardous materials, reclamation and recycling 1
- heat dissipation 1, 2, 3, 4
- high-availability mode 1
- hot-swapping
- fan trays 1
- modules 1
- HSSI connectors, cabling 1
- humidity requirements 1, 2, 3
- HyperTerminal 1
I
- I/O modules 1
- cables 1
- installing 1
- installing redundancy 1
- OC48 Frame APS 1
- removing 1
- SFPs 1
- SRP 1
- installing ERX routers 1, 2
- site planning 1
- installing modules
- I/O modules 1
- line modules 1
- order of installation 1
- slot groups and module arrangements 1
- SRP I/O modules 1
- SRP modules 1
- installing NVS cards 1, 2
- installing redundancy I/O modules 1
- installing redundancy midplane 1
- installing SFPs 1
- installing spare line modules 1
- IP address, assigning 1
J
- JTAC, contacting 1
L
- lead in equipment, reclamation and recycling 1
- LEDs 1
- abnormal activity 1
- fans 1
- line modules 1
- normal activity 1
- redundancy status 1
- SRP modules 1, 2
- lifting router 1
- line modules 1
- access 1
- combinations 1
- installing 1
- installing spare 1
- LEDs 1, 2
- OC48 1
- performance rate 1
- redundancy 1, 2
- removing 1
- slot groups 1
- uplink 1
- location, for ERX routers 1
M
- maintenance, system 1
- management access 1, 2
- setting up console 1, 2
- SNMP 1, 2
- Telnet setup 1
- Management Information Bases 1
- management port
- 10/100Base-T 1, 2
- managing modules 1
- manuals
- comments on 1
- mechanical requirements for distribution rack 1
- memory, upgrading 1
- MIBs (Management Information Bases) 1
- midplane 1
- redundancy 1
- models
- ERX router 1
- module reset button 1
- modules
- failure 1
- hot-swapping 1
- installing 1, 2
- order of installation 1
- managing 1
- removing 1
- repairing and replacing 1
- replacing 1
- self-testing 1
- storing 1
- types of 1
- monitoring LEDs 1
- monitoring temperature 1
- mounting kits 1
- mounting posts for rack 1
N
- network management 1, 2
- setting up console 1, 2
- SNMP 1, 2
- Telnet setup 1
- NMC-RX Device Management System 1
- notice icons 1
- NVS cards 1
- installing 1, 2
- storing 1
O
- OC48 modules 1
- ONLINE LED 1
- order of module installation 1
P
- packaging, recycling 1
- packet classification 1
- packing instructions 1
- PCMCIA slot, SRP modules 1
- performance rate, line modules 1
- PIM
- replacing 1
- pinouts, router cables and connectors 1
- planning site for installation 1
- plenum 1
- ports
- alarm 1
- external timing 1
- management 1
- redundancy 1, 2
- status LEDs 1
- power
- cabling power input module 1, 2
- consumption
- system 1, 2, 3, 4
- dissipation 1, 2, 3
- failures 1, 2
- redundancy 1
- source A 1
- source B 1
- specifications 1, 2, 3, 4
- power cord warnings 1
- power input module
- cabling 1
- replacing 1
- power requirements 1, 2, 3
- power switches 1, 2
- powering down router 1
- powering up router 1
- preinstallation responsibilities 1
- preparing site for installation 1
- primary SRP module 1
- problems 1
- product numbers, locating 1
Q
- QoS, packet classification for 1
R
- rack, distribution 1
- reclamation and recycling 1
- recycling Juniper Networks equipment 1
- redundancy
- line module status 1
- midplane 1
- SRP modules 1
- status 1
- redundancy features (hardware) 1
- fans 1
- line modules 1
- ports 1, 2
- SRP modules 1
- redundancy midplane 1
- installing 1
- REDUNDANT LED 1
- release mechanisms for SFPs 1
- removing components 1
- removing modules 1
- removing SFPs 1
- repacking components 1
- repairing hardware components 1
- replacing components 1
- replacing modules 1
- replacing NVS cards 1, 2
- replacing SFPs 1, 2
- reset button, module 1
- Restriction of Hazardous Substances (RoHS) Directive, recycling equipment 1
- Return Materials Authorization 1
- returning product 1
- RJ-45 connectors, cabling 1, 2
- RMA 1
- RoHS (Restriction of Hazardous Substances) Directive, recycling equipment 1
- RS-232 port 1, 2, 3, 4
S
- safety
- agency certification 1, 2, 3
- guidelines 1, 2, 3
- SC duplex connectors, cabling 1, 2
- self-testing, modules 1
- serial numbers, locating 1
- SFPs (small form-factor pluggable transceivers) 1
- installing 1
- removing 1
- storing 1
- show configuration command 1
- show environment command 1, 2
- show hardware command 1
- show version command 1, 2
- show interface gigabitEthernet command 1
- site planning 1
- size
- of ERX routers 1, 2, 3
- of rack 1
- slot disable command 1
- slot groups 1
- ERX1410 router 1
- ERX7xx models 1
- overloading 1
- small form-factor pluggable transceivers 1
- SMB connectors 1
- SNMP for management access 1, 2
- SODIMMs 1
- software
- configuration 1
- upgrading 1
- space requirements 1, 2, 3, 4, 5
- spare line modules, installing 1
- specifications
- airflow 1, 2, 3
- dimensions 1, 2, 3
- distribution rack 1
- electrical 1, 2, 3, 4
- heat dissipation 1, 2, 3
- space 1, 2, 3
- weight 1, 2, 3
- SRP I/O modules 1
- cabling 1, 2
- installing 1
- removing 1
- SRP modules 1
- errors on 1
- installing 1
- LEDs on 1, 2
- models 1
- PCMCIA slot 1
- powering down 1
- redundancy 1, 2
- removing 1, 2
- standby SRP module 1
- starting ERX routers 1
- status, redundancy 1
- storing, modules and components 1
- support, technical See technical support
- switches, power 1, 2
- switching on router 1
- switchover to spare line module 1
- synchronize command 1
- system maintenance 1
T
- technical support 1
- contacting JTAC 1
- Telnet connection to router 1
- temperature
- excessive 1, 2
- monitoring 1
- requirements 1, 2
- text and syntax conventions 1
- thermal protection mode 1, 2, 3
- timing inputs, external 1, 2
- tools needed 1, 2, 3, 4, 5
- troubleshooting 1, 2
- booting 1
- cables 1, 2
- clocking 1
- double-bit errors 1
- Ethernet link 1
- fans 1, 2
- FERF 1
- LED activity for 1
- modules 1, 2
- power failure 1, 2
- safety guidelines 1, 2
U
- uninstalling modules 1
- upgrading software 1
- uplink line modules 1
V
- ventilation 1
- voltage requirements 1, 2, 3
W
- warnings, safety 1
- Waste Electrical and Electronic Equipment (WEEE) Directive. See WEEE Directive
- WEEE (Waste Electrical and Electronic Equipment) Directive, recycling equipment 1
- weight
- of ERX routers 1, 2, 3
- of rack 1, 2
- wrist strap, antistatic 1
X
- X.21/V.35 connectors, cabling 1