[Contents][Prev][Next][Report an Error]

OC12/STM4 ATM Single-Mode Long Reach Without APS/MSP Redundancy Module Combination (256-MB Memory)

Line module label OCx/STMx ATM or OCx/STMx /DS3-ATM

I/O module label OC12 STM4 I/O
LONG HAUL

Number of I/O ports

1

Software release

First supported: 5.0.0, 5.3.0 or a higher-numbered release

Final supported: Not applicable

Description

130 W

256 MB of memory

The 128-MB version has reached end-of-life.

Unchannelized, concatenated OC12/STM4 for ATM

Type

ASIC

Capability

OC12/STM4

ATM/AAL5

Software features

See OCx/STMx ATM Modules for information about the layer 2 and layer 3 protocols and applications that this module combination supports.

Model compatibility

ERX-7xx models

ERX-14xx models

ERX-310 router

SRP module compatibility

SRP-5G+

SRP-10G

SRP-40G

SRP-40G PLUS

SRP-SE10G

Module redundancy support

1:N redundancy

NOTE: Line module redundancy is not supported on the ERX-310 router.

Cables and connectors

SC full duplex

Tx power:

min: –5.0 dBm

max: 0 dBm

Center wavelength: 1310 nm

Rx input power:

min: –34 dBm

max: –7 dBm

Fiber type: 9-micron core

Rated for 40 km (24.8 miles) of 9-micron core cable

See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.

LEDs

See Module LEDs.

Alarms, errors, and events

See Monitoring SONET/SDH Interfaces in JUNOSe Physical Layer Configuration Guide, Chapter 3, Configuring Unchannelized OCx/STMx Interfaces.

[Contents][Prev][Next][Report an Error]

Line module label	OCx/STMx ATM or OCx/STMx /DS3-ATM
I/O module label	OC12 STM4 I/O LONG HAUL
Number of I/O ports	1
Software release	First supported: 5.0.0, 5.3.0 or a higher-numbered release Final supported: Not applicable
Description	130 W 256 MB of memory The 128-MB version has reached end-of-life. Unchannelized, concatenated OC12/STM4 for ATM
Type	ASIC
Capability	OC12/STM4 ATM/AAL5
Software features	See OCx/STMx ATM Modules for information about the layer 2 and layer 3 protocols and applications that this module combination supports.
Model compatibility	ERX-7xx models ERX-14xx models ERX-310 router
SRP module compatibility	SRP-5G+ SRP-10G SRP-40G SRP-40G PLUS SRP-SE10G
Module redundancy support	1:N redundancy NOTE: Line module redundancy is not supported on the ERX-310 router.
Cables and connectors	SC full duplex Tx power: min: –5.0 dBm max: 0 dBm Center wavelength: 1310 nm Rx input power: min: –34 dBm max: –7 dBm Fiber type: 9-micron core Rated for 40 km (24.8 miles) of 9-micron core cable See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
LEDs	See Module LEDs.
Alarms, errors, and events	See Monitoring SONET/SDH Interfaces in JUNOSe Physical Layer Configuration Guide, Chapter 3, Configuring Unchannelized OCx/STMx Interfaces.