Hide Navigation Pane
Show Navigation Pane
Download
SHA1
CLI Commands Used to Configure Juniper Networks VSAs
Table 48 lists the Juniper Networks VSAs and the corresponding CLI commands used to modify them. The attributes are listed numerically.
Table 48: CLI Commands Used to Configure Juniper Networks VSAs
Attribute Number | Attribute Name | CLI Command |
|---|---|---|
[26-1] | Virtual-Router |
|
[26-10] | Ingress-Policy-Name |
|
[26-11] | Egress-Policy-Name |
|
[26-14] | Service-Category |
|
[26-15] | PCR |
|
[26-16] | SCR |
|
[26-17] | MBS |
|
[26-24] | Pppoe-Description |
|
[26-35] | Acct-Input-Gigapackets |
|
[26-36] | Acct-Output-Gigapackets |
|
[26-44] | Tunnel-Interface-Id |
|
[26-45] | Ipv6-Virtual-Router |
|
[26-46] | Ipv6-Local-Interface |
|
[26-47] | Ipv6-Primary-DNS |
|
[26-48] | Ipv6-Secondary-DNS |
|
[26-51] | Disconnect-Cause |
|
[26-53] | Service-Description |
|
[26-55] | DHCP-Options |
|
[26-56] | DHCP-MAC-Address |
|
[26-57] | DHCP-GI-Address |
|
[26-62] | MLPPP-Bundle-Name |
|
[26-63] | Interface-Desc |
|
[26-81] | L2C-Information |
|
[26-92] | L2C-Up-Stream-Data |
|
[26-93] | L2C-Down-Stream-Data |
|
[26-129] | Ipv6-NdRa-Prefix |
|
[26-141] | Downstream-Calculated-Qos-Rate |
|
[26-142] | Upstream-Calculated-Qos-Rate |
|
[26-143] | Max-Clients-Per-Interface |
|
[26-150] | ICR-Partition-Id |
|
[26-151] | IPv6-Acct-Input-Octets |
|
[26-152] | IPv6-Acct-Output-Octets |
|
[26-153] | IPv6-Acct-Input-Packets |
|
[26-154] | IPv6-Acct-Output-Packets |
|
[26-155] | IPv6-Acct-Input-Gigawords |
|
[26-156] | IPv6-Acct-Output-Gigawords |
|
[26-159] | DHCP-Option 82 |
|
