Subscriber AAA Accounting Messages Overview

Accounting messages identify service provisions and use on a per-user or per-tunnel basis. These messages keep track of when a particular service is initiated and terminated for a specific user.

JunosE Software supports the Acct-On message on startup or configuration of the first accounting server. Acct-Off messages are supported when the last RADIUS accounting server in a virtual router is removed, when the router is shut down, and when a virtual router that has configured RADIUS accounting servers is deleted.

Beginning with JunosE Release 11.0.0, you can configure the router to send the Partition-Accounting-On and Partition-Accounting-On messages to the RADIUS server whenever an ICR partition toggles between the backup and master states.

The router supports the following types of accounting messages:

• Acct-Start
• Acct-Stop
• Interim-Acct
• Acct-On
• Acct-Off
• Partition-Accounting-On
• Partition-Accounting-Off

Related Documentation

• RADIUS IETF Attributes Supported for Subscriber AAA Accounting Messages
• Juniper Networks VSAs Supported for Subscriber AAA Accounting Messages
• RADIUS IETF Attributes Supported for AAA Tunnel Accounting Messages
• DSL Forum VSAs in AAA Access and Accounting Messages Overview
• DSL Forum VSAs Supported for AAA Access and Accounting Messages
• RADIUS Attributes Supported for CLI AAA Messages
• CLI Commands Used to Configure RADIUS IETF Attributes
• CLI Commands Used to Configure Juniper Networks VSAs
• CLI Commands Used to Include ANCP-Related Juniper Networks VSAs in Access and Accounting Messages
• CLI Commands Used to Include DSL Forum VSAs in Access and Accounting Messages
• CLI Commands Used to Include or Exclude Attributes in RADIUS Messages