Hide Navigation Pane
Show Navigation Pane
Download
SHA1
Table of Contents
- About the Documentation
- Internet Protocol Version 4
- Configuring IPv4 Multicast
- IPv4 Multicast Overview
- Platform Considerations
- References
- Before You Begin
- Configuring the Switch Fabric Bandwidth
- Enabling IP Multicast
- Defining Static Routes for Reverse-Path Forwarding
- Displaying Available Routes for Reverse-Path Forwarding
- Enabling and Disabling RPF Checks
- Using Unicast Routes for RPF
- Defining Permanent IP Multicast Forwarding Entries
- Defining a Multicast Bandwidth Map
- Configuring Multicast QoS Adjustment
- Activating Multicast QoS Adjustment Functions
- Configuring Hardware Multicast Packet Replication
- Blocking and Limiting Multicast Traffic
- Deleting Multicast Forwarding Entries
- Monitoring IP Multicast Settings
- BGP Multicasting
- Investigating Multicast Routes
- Configuring IGMP
- IGMP Overview
- Platform Considerations
- References
- Before You Begin
- Configuring Static and Dynamic IGMP Interfaces
- Enabling IGMP on an Interface
- Configuring IGMP Settings for an Interface
- Specifying Multicast Groups
- Assigning a Multicast Group to an Interface
- Configuring Group Outgoing Interface Mapping
- Configuring Access Node Control Protocol for IGMP
- Configuring SSM Mapping
- Limiting the Number of Accepted IGMP Groups
- Including and Excluding Traffic
- Configuring Explicit Host Tracking
- Accepting IGMP Reports from Remote Subnetworks
- Disabling and Removing IGMP
- Monitoring IGMP
- IGMP Proxy Overview
- Configuring IGMP Proxy
- Establishing the IGMP Proxy Baseline
- Monitoring IGMP Proxy
- Configuring PIM for IPv4 Multicast
- Overview
- Platform Considerations
- References
- Before You Begin
- Enabling PIM on a VR
- Disabling PIM on a VR
- Enabling PIM on an Interface
- Setting a Priority to Determine the Designated Router
- Configuring the PIM Join/Prune Message Interval
- Configuring an RP Router for PIM Sparse Mode and PIM Sparse-Dense Mode
- Configuring BSR and RP Candidates for PIM Sparse Mode
- Migrating to BSR from Auto-RP
- Switching to an SPT for PIM Sparse Mode
- Creating Multicast VPNs
- Using PIM Sparse Mode Join Filters
- Configuring PIM SSM
- Configuring the BFD Protocol for PIM
- Removing PIM
- Resetting PIM Counters and Mappings
- Monitoring PIM
- Configuring DVMRP
- DVMRP Overview
- DVMRP Platform Considerations
- DVMRP References
- Before You Begin
- Enabling DVMRP on a Virtual Router
- Activating DVMRP on an Interface
- Configuring DVMRP Limits
- DVMRP Report Filter Overview
- Configuring DVMRP Summary Addresses Overview
- Changing the Metric for a Route
- Importing Routes from Other Protocols
- Specifying Routes to Be Advertised
- Preventing Dynamic Route Distribution
- Exchange DVMRP Unicast Routes Overview
- Enabling, Disabling, and Removing DVMRP
- Clearing DVMRP Routes
- Configuring DVMRP Tunnels
- Monitoring DVMRP
- Internet Protocol Version 6
- Configuring IPv6 Multicast
- IPv6 Multicast Overview
- IPv6 Multicast Platform Considerations
- IPv6 Multicast References
- Before You Begin
- Switch Fabric Bandwidth Configuration
- Configuring IPv6 Multicast Attributes
- IPv6 Multicast Bandwidth Map Overview
- Autosense Mechanism Overview
- Adaptive Mode Mechanism Overview
- Example: Configuring an IPv6 Multicast Bandwidth Map
- Multicast QoS Adjustment for IPv6
- IPv6 Hardware Multicast Packet Replication Overview
- IPv6 Hardware Multicast Packet Replication Considerations
- Configuring IPv6 Hardware Multicast Packet Replication
- Interface-Level Multicast Traffic Configuration for IPv6
- Port-Level Multicast Traffic Configuration for IPv6
- Deleting IPv6 Multicast Forwarding Entries
- BGP Multicasting
- Monitoring IPv6 Multicast
- Monitoring Available IPv6 Routes for Reverse-Path Forwarding
- Monitoring IPv6 Hardware Multicast Packet Replication
- Monitoring IPv6 Multicast Forwarding Entries
- Monitoring Active IPv6 Multicast Routes
- Monitoring Multicast Routes on Virtual Router Ports
- Monitoring IPv6 Multicast Entries in a Source or Group
- Monitoring Join Interface Details when IPv6 OIF Mapping is Configured
- Monitoring IPv6 Multicast Statistics
- Monitoring Summary Information of IPv6 Multicast Routes
- Monitoring IPv6 Multicast Protocols Enabled on the Router
- Monitoring Summary Information of IPv6 Multicast Protocols Enabled on the Router
- Monitoring IPv6 Multicast Status on a Virtual Router
- Configuring MLD and MLD Proxy
- MLD Overview
- MLD Platform Considerations
- MLD References
- Static and Dynamic MLD Interfaces
- Enabling MLD on an Interface
- Configuring MLD Settings on an Interface
- Configuring Multicast Groups for MLD
- MLD SSM Mapping Overview
- Overview of Limiting the Number of Accepted MLD Groups
- MLD Traffic Overview
- MLD Explicit Host Tracking Overview
- Configuring MLD Attributes
- MLD Proxy Overview
- Configuring MLD Proxy
- Establishing the MLD Proxy Baseline
- Monitoring MLD and MLD Proxy
- Monitoring MLD Information on a Virtual Router
- Monitoring MLD Groups
- Monitoring MLD Interfaces
- Monitoring Summary Information for MLD Interfaces
- Monitoring MLD on Mapped Outgoing Interfaces
- Monitoring MLD on Outgoing Interfaces
- Monitoring MLD Membership for Multicast Groups
- Monitoring MLD Information for Mapped Outgoing Interfaces
- Monitoring MLD SSM Mapping
- Monitoring the Number of MLD Groups on a Port
- Monitoring MLD Proxy Parameters
- Monitoring MLD Proxy Groups
- Monitoring MLD Proxy Interfaces
- Configuring PIM for IPv6 Multicast
- Overview
- Platform Considerations
- References
- Before You Begin
- Enabling and Disabling PIM on a VR
- Enabling PIM on an Interface
- Setting a Priority to Determine the Designated Router
- Configuring the PIM Join/Prune Message Interval
- Configuring an RP Router for PIM Sparse Mode
- Configuring BSR and RP Candidates for PIM Sparse Mode
- Switching to an SPT for PIM Sparse Mode
- Configuring PIM Sparse Mode Remote Neighbors
- Using PIM Sparse Mode Join Filters
- Configuring PIM SSM
- Configuring the BFD Protocol for PIM
- Removing PIM
- Resetting PIM Counters and Mappings
- Monitoring PIM
- Index
