List of SRX100, SRX210, SRX240, and SRX650 Services Gateways Supported Enterprise-Specific MIBs

Junos OS supports the following enterprise-specific MIBs:

• Structure of Management Information MIB—Contains object identifiers (OIDs) for the security branch of the MIBs used in Junos OS for J Series and SRX Series devices product, services and traps. This MIB is currently supported only by Junos OS for J Series and SRX Series devices. It also explains how the Juniper Networks enterprise-specific MIBs are structured. For a downloadable version of this MIB, see http://www.juniper.net/techpubs/en_US/junos10.3/information-products/topic-collections/reference-mibs-and-traps/mib-jnx-js-smi.txt. For more information, see Structure of Management Information MIB.
• Access Authentication Objects MIB—Provides support for monitoring firewall authentication, including data about the users trying to access firewall-protected resources and the firewall authentication service itself. This MIB is currently supported only by Junos OS for J Series and SRX Series devices. For a downloadable version of this MIB, see http://www.juniper.net/techpubs/en_US/junos10.3/information-products/topic-collections/reference-mibs-and-traps/mib-jnx-js-auth.txt .

  For more information, see Access Authentication Objects MIB.

• Alarm MIB—Provides support for alarms from the router. For a downloadable version of this MIB, see http://www.juniper.net/techpubs/en_US/junos10.3/information-products/topic-collections/reference-mibs-and-traps/mib-jnx-chassis-alarm.txt .

  For more information, see Alarm MIB.

• BGP4 V2 MIB—Contains objects used to monitor BGP peer-received prefix counters. It is based upon similar objects in the MIB documented in Internet draft draft-ietf-idr-bgp4-mibv2-03.txt, Definitions of Managed Objects for the Fourth Version of BGP (BGP-4), Second Version. For a downloadable version of this MIB, see http://www.juniper.net/techpubs/en_US/junos10.3/information-products/topic-collections/reference-mibs-and-traps/mib-jnx-bgpmib2.txt .

  For more information, see BGP4 V2 MIB.

• BFD MIB—Provides support for monitoring Bidirectional Forwarding Detection (BFD) sessions. For a downloadable version of this MIB, see http://www.juniper.net/techpubs/en_US/junos10.3/information-products/topic-collections/reference-mibs-and-traps/mib-jnx-bfd.txt .

  For more information, see Bidirectional Forwarding Detection (BFD) MIB.

• Chassis MIB—Provides support for environmental monitoring (power supply state, board voltages, fans, temperatures, and air flow) and inventory support for the chassis, System Control Board (SCB), System and Switching Board (SSB), Switching and Forwarding Model (SFM), Flexible PIC Concentrators (FPCs), and PICs. For a downloadable version of this MIB, see http://www.juniper.net/techpubs/en_US/junos10.3/information-products/topic-collections/reference-mibs-and-traps/mib-jnx-chassis.txt .

  For more information, see Chassis MIBs.

• Configuration Management MIB—Provides notification for configuration changes as SNMP traps. Each trap contains the time at which the configuration change was committed, the name of the user who made the change, and the method by which the change was made. A history of the last 32 configuration changes is kept in jnxCmChgEventTable. For a downloadable version of this MIB, see http://www.juniper.net/techpubs/en_US/junos10.3/information-products/topic-collections/reference-mibs-and-traps/mib-jnx-cfgmgmt.txt .

  For more information, see Configuration Management MIB.

• Ethernet MAC MIB—Monitors media access control (MAC) statistics on Gigabit Ethernet intelligent queuing (IQ) interfaces. It collects MAC statistics; for example, inoctets, inframes, outoctets, and outframes on each source MAC address and virtual LAN (VLAN) ID for each Ethernet port. For a downloadable version of this MIB, see http://www.juniper.net/techpubs/en_US/junos10.3/information-products/topic-collections/reference-mibs-and-traps/mib-jnx-mac.txt .

  For more information, see Ethernet MAC MIB.

• Event MIB—Defines a generic trap that can be generated using an op script or event policy. This MIB provides the ability to specify a system log string and raise a trap if that system log string is found. For a downloadable version of this MIB, see http://www.juniper.net/techpubs/en_US/junos10.3/information-products/topic-collections/reference-mibs-and-traps/mib-jnx-event.txt .

  For more information, see Event MIB.

• Firewall MIB—Provides support for monitoring firewall filter counters. Routers must have the Internet Processor II ASIC to perform firewall monitoring. For a downloadable version of this MIB, see http://www.juniper.net/techpubs/en_US/junos10.3/information-products/topic-collections/reference-mibs-and-traps/mib-jnx-firewall.txt .

  For more information, see Firewall MIB.

• Host Resources MIB—Extends the hrStorageTable object, providing a measure of the usage of each file system on the router in percentage. Previously, the objects in the hrStorageTable measured the usage in allocation units—hrStorageUsed and hrStorageAllocationUnits—only. Using the percentage measurement, you can more easily monitor and apply thresholds on usage. For a downloadable version of this MIB, see http://www.juniper.net/techpubs/en_US/junos10.3/information-products/topic-collections/reference-mibs-and-traps/mib-jnx-hostresources.txt .

  For more information, see Host Resources MIB.

• Interface MIB—Extends the standard ifTable (RFC 2863) with additional statistics and Juniper Networks enterprise-specific chassis information. For a downloadable version of this MIB, see http://www.juniper.net/techpubs/en_US/junos10.3/information-products/topic-collections/reference-mibs-and-traps/mib-jnx-if-extensions.txt .

  For more information, see Interface MIB.

• IP Forward MIB—Extends the standard IP Forwarding Table MIB (RFC 2096) to include CIDR forwarding information. For a downloadable version of this MIB, see http://www.juniper.net/techpubs/en_US/junos10.3/information-products/topic-collections/reference-mibs-and-traps/mib-jnx-ipforward.txt .

  For more information, see IP Forward MIB.

• IPsec Monitoring MIB—Provides operational and statistical information related to the IPsec and IKE tunnels on Juniper Networks routers. For a downloadable version of this MIB, see http://www.juniper.net/techpubs/en_US/junos10.3/information-products/topic-collections/reference-mibs-and-traps/mib-jnx-ipsec-monitor-asp.txt .

  For more information, see IPSec Monitoring MIB.

• IPsec Generic Flow Monitoring Object MIB—Based on jnx-ipsec-monitor-mib, this MIB provides support for monitoring IPsec and IPsec VPN management objects. This MIB is currently supported only by Junos OS for J Series and SRX Series devices. For a downloadable version of this MIB, see http://www.juniper.net/techpubs/en_US/junos10.3/information-products/topic-collections/reference-mibs-and-traps/mib-jnx-ipsec-flow-mon.txt .

  For more information, see IPsec Generic Flow Monitoring Object MIB.

• IPv4 MIB—Provides additional Internet Protocol version 4 (IPv4) address information, supporting the assignment of identical IPv4 addresses to separate interfaces. For a downloadable version of this MIB, see http://www.juniper.net/techpubs/en_US/junos10.3/information-products/topic-collections/reference-mibs-and-traps/mib-jnx-ipv4.txt .

  For more information, see IPv4 MIB.

• Network Address Translation (NAT) Objects MIB—Provides support for monitoring network address translation (NAT). This MIB is currently supported only by Junos OS for J Series and SRX Series devices. For a downloadable version of this MIB, see http://www.juniper.net/techpubs/en_US/junos10.3/information-products/topic-collections/reference-mibs-and-traps/mib-jnx-js-nat.txt .

  For more information, see Network Address Translation Objects MIB.

• Packet Forwarding Engine MIB—Provides notification statistics for Packet Forwarding Engines. For a downloadable version of this MIB, see http://www.juniper.net/techpubs/en_US/junos10.3/information-products/topic-collections/reference-mibs-and-traps/mib-jnx-pfe.txt .

  For more information, see Packet Forwarding Engine MIB.

• Ping MIB—Extends the standard Ping MIB control table (RFC 2925). Items in this MIB are created when entries are created in pingCtlTable of the Ping MIB. Each item is indexed exactly as it is in the Ping MIB. For a downloadable version of this MIB, see http://www.juniper.net/techpubs/en_US/junos10.3/information-products/topic-collections/reference-mibs-and-traps/mib-jnx-ping.txt .

  For more information, see PING MIB.

• Policy Objects MIB—Provides support for monitoring the security policies that control the flow of traffic from one zone to another. This MIB is currently supported only by Junos OS for J Series and SRX Series devices. For a downloadable version of this MIB, see http://www.juniper.net/techpubs/en_US/junos10.3/information-products/topic-collections/reference-mibs-and-traps/mib-jnx-js-policy.txt .

  For more information, see Policy Objects MIB.

• Reverse-Path-Forwarding MIB—Monitors statistics for traffic that is rejected because of reverse-path-forwarding (RPF) processing. For a downloadable version of this MIB, see http://www.juniper.net/techpubs/en_US/junos10.3/information-products/topic-collections/reference-mibs-and-traps/mib-jnx-rpf.txt .

  Note: The enterprise-specific RPF MIB is not supported on EX Series Ethernet Switches. For more information, see Reverse Path Forwarding MIB.

• RMON Events and Alarms MIB—Supports the Junos extensions to the standard Remote Monitoring (RMON) Events and Alarms MIB (RFC 2819). The extension augments alarmTable with additional information about each alarm. Two new traps are also defined to indicate when problems are encountered with an alarm. For a downloadable version of this MIB, see http://www.juniper.net/techpubs/en_US/junos10.3/information-products/topic-collections/reference-mibs-and-traps/mib-jnx-rmon.txt .

  For more information, see RMON Events and Alarms MIB.

• Security Interface Extension Objects MIB—Provides support for the security management of interfaces. This MIB is currently supported only by Junos OS for J Series and SRX Series devices. For a downloadable version of this MIB, see http://www.juniper.net/techpubs/en_US/junos10.3/information-products/topic-collections/reference-mibs-and-traps/mib-jnx-js-if-ext.txt .

  For more information, see Security Interface Extension Objects MIB.

• SNMP IDP Objects MIB—Provides support for monitoring SNMP IDP queries, requests, responses, and failures. This MIB defines the key monitoring and threshold crossing trap support, IDP database update status and trap support, attack-related monitoring and trap support for SRX100, SRX210, SRX240, and SRX650 services gateways. This MIB models IDP attributes specific to the appropriate Juniper Networks implementation. For a downloadable version of this MIB, see http://www.juniper.net/techpubs/en_US/junos10.3/information-products/topic-collections/reference-mibs-and-traps/jnx-js-idp.mib.txt .

  For more information, see IDP MIB.

• SPU Monitoring MIB—Provides support for monitoring SPUs on SRX5600 and SRX5800 devices. For a downloadable version of this MIB, see http://www.juniper.net/techpubs/en_US/junos10.3/information-products/topic-collections/reference-mibs-and-traps/mib-jnx-js-spu-monitoring.txt .

  For more information, see SPU Monitoring MIB.

• System Log MIB—Enables notification of an SNMP trap-based application when an important system log message occurs. For a downloadable version of this MIB, see http://www.juniper.net/techpubs/en_US/junos10.3/information-products/topic-collections/reference-mibs-and-traps/mib-jnx-syslog.txt .

  For more information, see System Log MIB.

• Traceroute MIB—Supports the Junos extensions of traceroute and remote operations. Items in this MIB are created when entries are created in the traceRouteCtlTable of the Traceroute MIB. Each item is indexed exactly the same way as it is in the Traceroute MIB. For a downloadable version of this MIB, see http://www.juniper.net/techpubs/en_US/junos10.3/information-products/topic-collections/reference-mibs-and-traps/mib-jnx-traceroute.txt .

  For more information, see Traceroute MIB.

• Utility MIB—Provides SNMP support for exposing Junos data and has tables that contain information on each type of data, such as integer and string. For a downloadable version of this MIB, see http://www.juniper.net/techpubs/en_US/junos10.3/information-products/topic-collections/reference-mibs-and-traps/mib-jnx-util.txt .

  For more information, see Utility MIB.

• VPN Certificate Objects MIB—Provides support for monitoring the local and CA certificates loaded on the router. This MIB is currently supported only by Junos OS for J Series and SRX Series devices. For a downloadable version of this MIB, see http://www.juniper.net/techpubs/en_US/junos10.3/information-products/topic-collections/reference-mibs-and-traps/mib-jnx-js-cert.txt .

  For more information, see VPN Certificate Objects MIB.