Example: Configuring an Access Point Cluster (CLI)

This example shows how to configure an access point cluster named cluster id 1 with the following settings:

ID: 1
Name: cluster1
Interfaces: fe-0/0/5 (default cluster for the APs connecting to interface fe-0/0/5)
Attribute: Default cluster for the APs connecting to interface fe-0/0/5
Channel management enabled

user@host # set wlan cluster 1 name cluster1 default-cluster channel-management interfaces fe-0/0/5

To add ap-1 to cluster id 1:

user@host # set wlan access-point ap-1 cluster 1

To configure cluster id 1 with the following settings:

user@host # set wlan cluster 1 radio 1 radio-options mode a protection auto fragmentation-threshold 256