Example: Disabling Country Broadcast (J-Web)

In this example, you disable radio 1 on access point ap-1 from broadcasting the country in which it is operating in its beacons and probe responses.

Before you configure an access point, you must specify the MAC address of the access point being configured. See AX411 Access Point Configuration Overview.

1. Select Configure>Wireless LAN>Settings.
2. Under AP Name, select ap-1.
3. Under Radio ID, select radio 1, then click Edit.
4. In the Edit - Radio window, select the Radio Settings tab.
5. Under 802.11d Support, click Disable.
6. Click OK.