Example: Configuring Radio Settings (J-Web)

This example shows how to configure radio 1 on the access point ap-1 with the following settings:

• Radio mode: IEEE 802.11b/g/n
• Channel: 6
• Channel bandwidth: 40 MHz
• Maximum stations: 100
• Transmit power: 75%

Before you configure an access point, you must specify the MAC address of the access point being configured. See AX411 Access Point Configuration Overview.

1. Select Configure>Wireless LAN>Settings.
2. Under AP Name, select ap-1.
3. Under Radio ID, select radio 2, then click Edit.
4. In the Edit - Radio window, select the Radio Settings tab.
5. For Radio mode, select bgn.
6. Next to Channel, enter 6.
7. For Channel bandwidth, select 40.
8. Click More.
9. Next to Max stations, enter 100.
10. Next to Transmit power, enter 75.
11. Click OK to return to the Radio Settings tab.
12. Click OK.