Example: Configuring a Virtual Access Point for No Security and HTTP Redirect (J-Web)

This example shows how to configure virtual access point vap-1 on radio 1 for access point ap-1 with the following settings:

• SSID: open-hotspot
• VLAN ID: 2
• No security
• HTTP redirect to the URL http:\\wireless-coffee.com\usage_agreement.html

Before you configure an access point, you must specify the MAC address of the access point being configured. See AX411 Access Point Configuration Overview.

1. Select Configure>Wireless LAN>Settings.
2. Under AP Name, select ap-1.
3. Under Radio ID, select radio 1, then click Edit.
4. In the Edit - Radio window, select the Radio tab.
5. Next to Virtual Access Points, click Add.
6. In the Add - Virtual Access Point window, select the Basic Settings tab.
7. Next to VAP ID, select 1.
8. Next to SSID, enter open-hotspot.
9. Next to VLAN ID, enter 2.
10. Select HTTP Redirect.
11. Next to Redirect URL, enter http:\\wireless-coffee.com\usage_agreement.html .
12. Select the Security tab.
13. Next to Security, select None.
14. Click OK.