Example: Configuring a MAC Filter List (J-Web)

MAC authentication allows you to control access to the access point based on client MAC addresses. Based on how you set the filter, you can either allow only clients whose MAC addresses are on a filter list or deny clients that are on the list.

This example shows how to configure a MAC filter list for access point ap-1 to deny the following client MAC addresses from accessing the wireless network:

• 00:08:C7:1B:8C:02
• 01:23:45:67:89:ab

Before you configure an access point, you must specify the MAC address of the access point being configured. See AX411 Access Point Configuration Overview.

1. Select Configure>Wireless LAN>Settings.
2. Under AP Name, select ap-1.
3. In the Edit - Access Point window, select the MAC Filtering tab.
4. Click Add.
5. In the Add MAC Filter window, enter 00:08:C7:1B:8C:02, and click OK.
6. Click Add
7. In the Add MAC Filter window, enter 01:23:45:67:89:ab, and click OK.
8. For Action, select deny.
9. Click OK.