AX411 Access Point Configuration Overview

You configure the AX411 Access Point using the Junos OS CLI or J-Web interface on the SRX Series device.

Note: Accessing the AX411 Access Point through its console port is not supported.

To change the default configuration of an access point, you must first specify the MAC address of the access point being configured. The MAC address links an access point to its configuration on the SRX Series device.

You can determine the MAC address of an access point in one of the following ways:

• If you have physical access to the access point, view the MAC address printed on the bottom of the device.
• Use CLI operational command show system services dhcp binding to display the MAC address of the access point.
• From the J-Web interface, select Monitor>Wireless LAN and click the Select an access point menu.

To specify the MAC address of an access point:

In this example, the access point with the MAC address 00:12:cf:c7:5d:c0 is configured with the name ap-1.

If you remove the configuration for an access point from the SRX Series Services Gateway, the access point is reset to its factory default.

Note: Changing some access point settings might cause the access point to stop and restart system processes. If this happens, wireless clients will temporarily lose connectivity. We recommend that you change access point settings when WLAN traffic is low.

Related Topics

• System and Network Configuration Overview
• Radio Configuration Overview
• Virtual Access Point Configuration Overview
• Understanding Quality of Service